Xiaowei Niu

Prof. Xiaowei Niu


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 June 2025 in Microstructures
Verified
Journal Article
Open access
PDF file
SWShuo Wang
Shuo Wang
XNXiaowei Niu
Xiaowei Niu
LWLin Wang
Lin Wang
JBJinghui Bi
Jinghui Bi
WYWeiyou Yang
Weiyou Yang
HHHuilin Hou
Huilin Hou
Photocatalytic hydrogen production is a sustainable approach to addressing energy and environmental issues, with ZnS being a prominent photocatalyst due to its efficiency, stability, and affordability. However, its wide bandgap and quick carrier recombination hinder its performance. Non-metal doping, particularly with nitrogen and carbon, has been shown to enhance electronic structure, light absorption, and charge separation of ZnS, thus improving its photocatalytic activity. This review highlights the advancements in nitrogen-doped, carbon-doped, and carbon-nitrogen co-doped ZnS, emphasizing nitrogen's significant impact on bandgap reduction and charge transfer, and carbon's role in promoting heterojunctions and active sites. Co-doping further amplifies these effects, leading to superior photocatalytic performance. The review also discusses performance variations among catalysts, the effects of synthesis methods and reaction conditions, and the role of auxiliary agents. Future research should concentrate on comparing doping methods, optimizing synthesis, and exploring phase-dependent activities to maximize the potential of ZnS-based photocatalysts. This work highlights the benefits of non-metal doped ZnS in hydrogen production and outlines key challenges and future research directions in the field.

3 June 2025 in Crystals
Verified
Journal Article
Open access
PDF file
ZJZheng Jia
Zheng Jia
YYYongzhi Yu
Yongzhi Yu
ZMZhiwen Mao
Zhiwen Mao
SDSichao Du
Sichao Du
QCQiuli Chen
Qiuli Chen
XNXiaowei Niu
Xiaowei Niu
The influences of the addition of Ca, Zn, and Zr on the corrosion behavior and mechanism of as-homogenized Mg-3Sn (T3) alloys in a 3.5% NaCl solution were systematically investigated via hydrogen evolution, mass loss, and electrochemical tests. The results indicated that the addition of Ca resulted in a decrease in the corrosion resistance of the T3 alloy. However, the subsequent addition of Zn and Zr could enhance the corrosion resistance of the Mg-3Sn-1Ca (TX31) alloy. The primary cause for the decline in the corrosion resistance of the TX31 alloy was that Ca altered the type of the second phase and the corrosion mechanism of the T3 alloy. This was attributed to the fact that the addition of Ca in the T3 alloy induced the precipitation of the CaMgSn phase and inhibited the precipitation of the Mg2Sn phase. Simultaneously, both the average grain size and the area fraction of the second phase increased, which provided more initiation sites for pitting and accelerated the corrosion of the alloy. The addition of Zr in the TX31 alloy could remarkably refine grains, inhibit anodic corrosion, and improve corrosion resistance. Nevertheless, the corrosion resistance of the Mg-3Sn-1Ca-1Zr (TXK311) alloy was still inferior to that of the T3 alloy. In this study, the Mg-3Sn-1Ca-1Zn (TXZ311) alloy exhibited the best corrosion resistance, with a hydrogen-evolution corrosion rate of 2.82 mm·year−1. This was because the addition of Zn refined the grains of the TX31 alloy and facilitated the formation of a relatively stable passivation film, which effectively prevented the intrusion of Cl−, thereby enhancing the corrosion resistance of the alloy.

30 January 2026 in Crystals
Verified
Journal Article
Open access
PDF file
YTYixuan Tang
Yixuan Tang
XNXiaowei Niu
Xiaowei Niu
ZGZhengjun Guan
Zhengjun Guan
CWChengxin Wang
Chengxin Wang
XMXinyu Ma
Xinyu Ma
HPHongyuan Pan
Hongyuan Pan
Earth-abundant nickel phosphide electrocatalysts show great potential for the hydrogen evolution reaction (HER), yet their efficiency requires further enhancement for practical applications. Herein, a novel in situ strategy is developed to synthesize a high-performance electrocatalyst on nickel foam (NF), composed of N-doped carbon-coated Ni5P4–Ni3P heterostructures. This is achieved through the phosphidation and subsequent carbon coating of hydrothermally grown Ni(OH)2 nanosheets. The resulting catalyst exhibits excellent HER activity in acidic media, requiring a low overpotential of only 63 mV to achieve a current density of 10 mA cm−2. The superior performance stems from the synergistic effects of multiple factors: the porous nanosheet architecture and multi-phase interfaces provide abundant active sites, while the conductive N-doped carbon network significantly enhances charge-transfer kinetics and catalyst stability. This work presents an effective approach for designing efficient non-precious metal HER electrocatalysts.

26 December 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
ZJZheng Jia
Zheng Jia
TSTingting Song
Tingting Song
XNXiaowei Niu
Xiaowei Niu
FYFu Yang
Fu Yang
SDSichao Du
Sichao Du
A novel homogeneous Mg-1Bi-0.5X (X = Gd, Y, Nd, Ce, La) alloy was fabricated in this study, and its electrochemical properties as well as discharge characteristics as an anode material for primary magnesium-air batteries were systematically investigated through electrochemical tests and battery discharge experiments. The results demonstrate that the addition of Nd promotes the formation of a refined grain structure and semi-continuous network-distributed NdBi secondary phase, which significantly enhances the discharge performance. Microstructural analysis reveals that the discharge products of Mg-1Bi-0.5Nd exhibit a loose, porous morphology. This structure facilitates product exfoliation via crack propagation, thereby improving electrolyte accessibility and enhancing the anode’s discharge stability and efficiency. At a current density of 20 mA cm −2 , the alloy achieves a specific capacity of 1492.54 mAh g −1 and an anodic efficiency of 68.5%, representing a 114.1% improvement over that of the AZ31. These results highlight the superior discharge performance of the Mg-1Bi-0.5Nd anode.

3 December 2024 in Materiali in tehnologije
Verified
Journal Article
Closed access
PDF file
SDSichao Du
Sichao Du
ZJZheng Jia
Zheng Jia
ZMZhiwen Mao
Zhiwen Mao
XNXiaowei Niu
Xiaowei Niu
Mg alloys are widely used in the aerospace and automotive industries, as well as in electronic products due to their low density and high specific strength. However, the poor corrosion resistance of Mg alloys limits their applications. Rare earth elements have been shown to improve the corrosion resistance of alloys. In this study, Mg-1Bi-0.5x (x = Nd, Ce, La) alloys were prepared by alloying with Bi, Nd, Ce, and La. The microstructure and corrosion behavior of Mg-1Bi-0.5x (x = Nd, Ce, La) alloys were investigated using X-ray diffraction (XRD), optical microscopy (OM), scanning electron microscopy (SEM), hydrogen evolution tests, weight loss experiments, and electrochemical measurements. The results indicate that the Mg-1Bi-0.5Nd alloy exhibits higher corrosion potentials and lower corrosion current densities, indicating superior corrosion resistance. This improvement is attributed to the formation of a more stable and uniform film of corrosion products, which prevents further corrosion and enhances corrosion resistance.

20 December 2024 in Crystals
Verified
Journal Article
Open access
PDF file
ZJZheng Jia
Zheng Jia
SDSichao Du
Sichao Du
XNXiaowei Niu
Xiaowei Niu
TX31 (Mg-3Sn-1Ca) is an alloy with promising future applications. This study enhances the corrosion resistance of the TX31 alloy through the addition of Zr and Zn and compares the effects of individual Cu addition and Zn/Cu composite addition on the corrosion resistance of the TX31 alloy. This study investigates the corrosion properties of TX31 alloys, focusing on the effects of the grain size, second phase, corrosion product film, and texture intensity. The addition of Zr and Zn changed the second-phase area fraction, while Cu introduced a new Mg2Cu phase. The TXZ311 alloy (Mg-3Sn-1Ca-1Zn) exhibited the best corrosion resistance, with a corrosion rate as low as 1.68 mm·year−1, a significant reduction compared to other alloys. This improvement is attributed to its higher fraction of high-angle grain boundaries (HAGBs) and the enhanced stability of the corrosion product film. The TXK311 alloy (Mg-3Sn-1Ca-1Zr) showed superior corrosion resistance, with a rate of 2.97 mm·year−1, due to its uniform and fine grain structure. In contrast, the TX31 alloy had the poorest corrosion resistance, with a corrosion rate of 3.66 mm·year−1, due to its bimodal microstructure. The addition of Cu in the TXC311 (Mg-3Sn-1Ca-1Cu) and TXCZ3111 (Mg-3Sn-1Ca-1Cu-1Zn) alloys resulted in micro-galvanic corrosion between α-Mg and Mg2Cu, which decreased the corrosion resistance.