With the emergence of autonomous functions in road vehicles, there has been increased use of Advanced Driver Assistance Systems comprising various sensors to perform automated tasks. Light Detection and Ranging (LiDAR) is one of the most important types of optical sensor, detecting the positions of obstacles by representing them as clusters of points in three-dimensional space. LiDAR performance degrades significantly when a vehicle is driving in the rain as raindrops adhere to the outer surface of the sensor assembly. Performance degradation behaviors include missing points and reduced reflectivity of the points. It was found that the extent of degradation is highly dependent on the interface material properties. This subsequently affects the shapes of the adherent droplets, causing different perturbations to the optical rays. A fundamental investigation is performed on the protective polycarbonate cover of a LiDAR assembly coated with four classes of material—hydrophilic, almost-hydrophobic, hydrophobic, and superhydrophobic. Water droplets are controllably dispensed onto the cover to quantify the signal alteration due to the different droplets of various sizes and shapes. To further understand the effects of droplet motion on LiDAR signals, sliding droplet conditions are simulated using numerical analysis. The results are validated with physical optical tests, using a 905 nm laser source and receiver to mimic the LiDAR detection mechanism. Comprehensive explanations of LiDAR performance degradation in rain are presented from both material and optical perspectives. These can aid component selection and the development of signal-enhancing strategies for the integration of LiDARs into vehicle designs to minimize the impact of rain.
The performance of road vehicles degrades when driving in adverse weather conditions. Weather testing for vehicles is important to understand the impacts of precipitation on vehicle performance, such as driver visibility, autonomous sensor signal, tire traction, and structural integrity due to corrosion, to ensure safety. This tutorial summarizes the essential elements for performing realistic testing by applying physical and meteorological rationale to vehicle applications. Three major topics are identified as crucial steps for precise quantitative studies, including understanding the natural precipitation characteristics, estimating the perceived precipitation experienced by a moving vehicle, and selecting data collection strategies. The methods used in current practices to investigate the effects of rain and snow on road vehicles at common facilities of outdoor test tracks, drive-through weather chambers, and climatic wind tunnels are summarized. The testing techniques and relevant instrumentations are also discussed, with considerations of factors that influence the measured data, such as particle size distribution, precipitation intensity, wind-induced droplet dynamic events, accumulation behaviour, etc. The goals of this paper are to provide a tutorial with guidelines on designing weather testing experiments for road vehicles and to promote the idea of establishing standardized methodologies for realistic vehicle testing that facilitates accurate prediction of vehicle performance in adverse weather conditions.
1 December 2024 in Transactions of the Canadian Society for Mechanical Engineering
Cameras are increasingly used in modern vehicles equipped with advanced driver assistance systems (ADAS) to collect environmental information. Cameras suffer performance degradation when driving in adverse weather conditions, such as rain, as precipitation droplets impact the camera lens and cause obstruction and blurring of the vision. The relationships between image quality, object detection accuracy, and surface wettability of camera lenses are investigated. This paper applies a previously developed evaluation procedure for wind tunnel testing with simulated adverse driving and rain conditions. Realistic rain characteristics perceived by a moving vehicle at different driving speeds are simulated using a novel rain simulation system implemented into a wind tunnel. Moreover, an emphasis is put on comparing the use of hydrophilic and hydrophobic surfaces to provide insights into material selection when designing camera lenses for ADAS. It is found that droplet dynamics, such as size, velocity, shape, and motion can impact the camera image quality and, subsequently, object detection accuracy. This paper demonstrates the use of various materials and evaluation metrics and their implications from a practical perspective when subjected to realistic driving-in-rain scenarios. The results suggest that the use of hydrophobic lenses promotes better performance over hydrophilic lenses in most cases with exceptions.
With the emergence of autonomous functions in road vehicles, there has been an increased use of Advanced Driver Assistance Systems comprising various sensors to perform automated tasks. Light Detection and Ranging (LiDAR) is one of the most important types of optical sensor that detects the positions of obstacles, representing them as clusters of points in 3-dimensional space. LiDAR performance degrades significantly when driving in rain as raindrops adhere to the outer surface of the sensor assembly. The performance degradation behaviors include missing points and reduced reflectivity of the points. It was found that the extent of degradations is highly dependent on the interface material properties, which subsequently affects the shapes of the adherent droplets, causing different perturbations to the optical rays. A fundamental investigation is performed on the protective polycarbonate cover of the LiDAR assembly coated with four classes of materials – hydrophilic, almost-hydrophobic, hydrophobic, and superhydrophobic. Water droplets are controllably dispensed onto the cover to quantify the signal alteration due to each droplet of various sizes and shapes. To further understand the effects of droplet motion on LiDAR signals, sliding droplet conditions are simulated using numerical analysis and validated with physical optical tests using a 905 nm laser source and receiver to mimic the LiDAR detection mechanism. Comprehensive explanations are presented on LiDAR performance degradation in rain from both material and optical perspectives. These can aid component selection and the development of signal enhancing strategies for integrating LiDARs in vehicle designs to minimize the impact of rain.
1 June 2025 in Journal of Traffic and Transportation Engineering (English Edition)
LiDAR sensors are becoming more common and are going to be widely adopted in vehicles in the future by reducing the production cost of the time-of-flight units. Manufacturers are uncertain about the placement, cover material, and shape of the assembly to achieve the optimal performance of the LiDAR, especially in rainy conditions. Although there are existing methodologies for evaluating the visibility and signal intensity of point clouds, there are no indexing approaches available since they would require a broad and comprehensive dataset and realistic and repeatable conditions to perform parametric studies. A matrix of rain conditions with quantified raindrop distribution characteristics is simulated using a wind tunnel via the wind-driven rain concept to produce the realistic impact of raindrops onto the sensor assembly surface at various wind speeds. This paper presents a performance prediction model method for LiDAR sensors and showcases the capability of such a model to provide insights quantitatively when comparing variations. The model is 3-dimensional, including rain conditions perceived by a moving vehicle at different speeds, material properties of surface wettability, and LiDAR visibility in rain compared to dry conditions. The observed LiDAR signal degradation follows an exponential manner, for which this study provides experimentally derived coefficients, enabling quantitative prediction across materials, topologies, rain, and driving speed conditions.