To address the issue of low closed-loop feedback bandwidth caused by the long latency of Carrier-Envelope Phase (CEP) measurement systems for amplified femtosecond laser pulses, and to meet the requirements for real-time single-shot measurement in 10 kHz repetition rate systems, this paper proposes a microsecond-level low-latency CEP measurement technique based on a Field-Programmable Gate Array (FPGA). To tackle the problem of non-uniform spectral sampling resulting from nonlinear wavelength-frequency mapping, the system implements a real-time linear interpolation algorithm for the interference spectrum. This approach effectively suppresses computational spurious peaks introduced by non-uniform sampling and significantly reduces measurement errors. Adopting a fully pipelined parallel processing architecture, the system achieves a CEP processing latency of approximately 89 μs, representing an improvement of 2–3 orders of magnitude compared to traditional Central Processing Unit (CPU)-based solutions. Hardware-in-the-loop testing, conducted by injecting a known sinusoidal phase modulation into the interference spectrum of a 10 kHz laser amplification system, demonstrates that the computational error of the proposed algorithm is less than 30 mrad. This work paves the way for achieving single-shot CEP feedback locking in high-repetition-rate laser amplification systems.