The design of passive cooling systems is part of the energy‐efficient building since population growth and indoor requirements in various dwellings are paramount. As a part of passive designs, modifying the conventional roof with phase change materials (PCM) is one of the techniques to control the abnormal changes of the inner surface temperature of the roof. In this aspect, a numerical investigation has been carried out by incorporating the PCM encapsulated pipes in the RCC (reinforced concrete), and a comprehensive analysis has been carried out. Three different shapes are chosen, namely circular, oval, and rectangular oval, to encapsulate the PCM. Diurnal outside changes are considered to envisage the inner surface temperature of the roof. Validation of the literature's experimental results is done before developing a numerical model for the current study. The effect of encapsulated shape on PCM's average temperature, liquid fraction and energy storage has been studied. The inner surface temperature is reduced drastically with the roof consisting of elliptical encapsulated PCM than other designs such as circular and rectangular oval encapsulated PCM. Moreover, the performance of PCM is sensitive to encapsulated shape and location within the system.
Simultaneous Localization and Mapping (SLAM) is essential for autonomous movement in intelligent robotic systems. Traditional SLAM using a single sensor, such as an Inertial Measurement Unit (IMU), faces challenges including noise and drift. This paper introduces a novel Cartographer-based SLAM approach for DAMR trajectory generation in indoor environments to reduce drift errors and improve localization accuracy. This SLAM approach integrates multi-sensor data with extended Kalman filter (EKF) fusion from wheel odometry, an RGB-D camera (RTAB-Map), and an IMU for precise mapping with DAMR trajectory generation and is compared with the heading reference trajectory generated by robot pose estimation and frame transformation. This system is implemented in the Robot Operating System (ROS 2) for coordinated data acquisition, processing, and visualization. After experimental verification, the DAMR trajectories generated are closer to the reference trajectory and drift errors are tuned. The experimental results revealed that the DAMR trajectory with multi-sensor data integration using the EKF effectively improved the positioning accuracy and robustness of the system. The proposed approach shows improved alignment with the reference trajectory, yielding a mean displacement error of 0.352% and an absolute trajectory error of 0.007 m, highlighting the effectiveness of the fusion approach for accurate indoor robot navigation.
24 December 2025 in Journal of Materials Engineering and Performance