We present the logical expressions (LE) approach that allows fast computation of three-dimensional eddy current problems, including parts in motion. The approach applies time-dependent logical expressions to describe moving parts of the model on a fixed computational grid. The study is motivated by a novel nondestructive testing technique called Lorentz force eddy current testing (LET), which enables the detection of defects lying deep inside a conducting material. Depending on the definition of the frame of reference, we present two different implementations of the LE approach referred to as 1) moving magnet approach, and 2) moving defect approach. In order to demonstrate the advantages of the LE approach, we compare its results with the sliding mesh technique. The validation of the obtained results with experiments is also presented.
1 January 2008 in Serbian Journal of Electrical Engineering
The problem of determining defects in structures using eddy current methods was investigated. The goal of this work is to demonstrate that the forces generated by the eddy currents and acting back on the magnet system can be used to detect defects in the object. Numerical simulations and experimental investigations have been performed. This novel technique has been found to be sensitive enough to detect even deep defects in an Aluminium bar moving relative to the field-generating magnet system.
Relative movement of permanent magnet and conductor evokes forces acting on both objects (Lorentz forces). These forces can be used for studying material characteristics of the conducting object (nondestructive testing). The paper compares various modeling techniques (transient, quasi-static, fast-quasi-static) of a moving permanent magnet above conducting plate using 2-D and 3-D finite-element method (FEM). The proposed approaches are applied to calculations of force profiles which enable to identify defects in conductor. The comparison of simulations with measurements performed on a long aluminum bar is also presented.
26 February 2014 in IEEE Transactions on Magnetics
The primary aim of this paper is to present new 2-D/3-D numerical technique providing fast calculations of Lorentz forces acting on a permanent magnet moving relatively to a solid electrically conducting object. This specific field configuration represents a typical problem arising in novel non-destructive testing and evaluation technique known as the Lorentz force eddy-current testing (LET). The proposed technique, referred to as the weak reaction approach (WRA) is based on several model simplifications, which, in the limits of low magnetic Reynolds numbers, allow considerable reduction of the simulation time while maintaining the accuracy of the solution. For evaluation of the computational requirements and verification of the obtained results, the well-established sliding mesh technique is used. Finally, the presented WRA is applied to various parametric studies in form of defect imaging, which can throw light on possible reconstruction and localization of defects by solving an inverse LET problem.
28 October 2014 in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
Purpose: – The purpose of this paper is to present a novel electromagnetic non-destructive evaluation technique, so called Lorentz force eddy current testing (LET). This method can be applied for the detection and reconstruction of defects lying deep inside a non-magnetic conducting material. Design/methodology/approach: – In this paper the technique is described in general as well as its experimental realization. Besides that, numerical simulations are performed and compared to experimental data. Using the output data of measurements and simulations, an inverse calculation is performed in order to reconstruct the geometry of a defect by means of sophisticated optimization algorithms. Findings: – The results show that measurement data and numerical simulations are in a good agreement. The applied inverse calculation methods allow to reconstruct the dimensions of the defect in a suitable accuracy. Originality/value: – LET overcomes the frequency dependent skin-depth of traditional eddy current testing due to the use of permanent magnets and low to moderate magnetic Reynolds numbers (0.1-1). This facilitates the possibility to detect subsurface defects in conductive materials.