In this paper we explore the printability of reversible networks formed by catechol functionalized PEG solutions and metal cations (Al3+, Fe3+ or V3+). The printability and shape fidelity were dependent on the ink composition (metal ion type, pH, PEG molecular weight) and printing parameters (extrusion pressure and printing speed). The relaxation time, recovery rate and viscosity of the inks were analyzed in rheology studies and correlated with thermodynamic and ligand exchange kinetic constants of the dynamic bonds and the printing performance (i.e. shape fidelity of the printed structures). The relevance of the relaxation time and ligand exchange kinetics for printability was demonstrated. Cells seeded on the materials crosslinked with Al3+, Fe3+ ions were viable and revealed well-spread morphologies during 7 day culture, indicating the potential of the formulations to be used as inks for cell encapsulation. The proposed dynamic ink design offers significant flexibility for 3D bioprinting, and enables straightforward adjustment of the printable formulation to meet application-specific needs.
Cells are highly responsive to changes in their mechanical environment, influencing processes such as stem cell differentiation and tumor progression. To meet the growing demand for materials used for high throughput mechanotransduction studies, simple means of dynamically adjusting the environmental viscoelasticity of cell cultures are needed. Here, a novel method is presented to dynamically and reversibly control the viscoelasticity of naturally derived polymer hydrogels through interactions with poly (ethylene glycol) (PEG). Interactions between PEG and hydrogel polymers, possibly involving hydrogen bonding, stiffen the hydrogel matrices. By dynamically changing the PEG concentration of the solution in which polymer hydrogels are incubated, their viscoelastic properties are adjusted, which in turn affects cell adhesion and cytoskeletal organization. Importantly, this effects is reversible, providing a cost‐effective and simple strategy for dynamically adjusting the viscoelasticity of polymer hydrogels. This method holds promise for applications in mechanobiology, biomedicine, and the life sciences.
Biological activities take place in 3D environments, where cells interact in various directions in a defined, often microstructured, space. A sub‐millimeter‐sized stretching device is developed to mechanically stimulate a structurally restricted, soft multicellular microenvironment to investigate the effect of defined cyclic mechanical forces on a multicellular system. It consists of a multi‐material 3D microstructure made of Polydimethylsiloxane (PDMS) and gelatine‐based hydrogel, which is printed using the 2‐photon polymerization (2PP) method. The printed structures are first characterized microscopically and mechanically to study the effect of different printing parameters. Using 2PP, organotypic cell cultures are then directly printed into the hydrogel structures to create true 3D cell culture systems. These systems are mechanically stimulated with a cantilever by indenting at defined positions. The cells in the 3D organotypic cell culture change morphology and actin orientation when exposed to cyclic mechanical stretch, even within short timescales of 30 min. As proof of concept, a Medaka retinal organoid is encapsulated in the same structure to demonstrate that even preformed organoids can be stimulated by this method. The results highlight the capability of 2PP for manufacturing multifunctional soft devices to mechanically control multicellular systems at micrometer resolution and thus mimic mechanical stresses as they occur in vivo.
Influenza A viruses (IAV) display a broad variety of morphologies ranging from spherical to long filamentous virus particles. These diverse phenotypes are believed to allow the virus to overcome various immunological and pulmonary barriers during entry into the airway epithelium and influence the viral entry pathway. Remarkably, lab-adapted IAV strains lost this morphological variance and exhibit preferred spherical morphology. However, it remains unclear which factors lead to this lab-adapted preference and which pulmonary defense factors are responsible for the preferred filamentous morphology in physiological settings. In this study, we established fluorescent reporter viruses with spherical or filamentous morphology but with the same surface glycoproteins. We developed a correlative fluorescence and scanning electron microscopy workflow to analyze the impact of viral morphology on cell-to-cell spread and identify conditions under which IAV with either spherical or filamentous morphology confer an advantage. Our findings demonstrate that filamentous IAV cell-to-cell spread is significantly slower in various cell lines, which can explain the predominant spherical morphology in lab-adapted strains. This observation is consistent with delayed entry kinetics of filamentous viruses structurally analyzed by cellular cryo-electron tomography. We found that cellular junction integrity and mucin do not exert morphology-dependent inhibition of IAV cell-to-cell spread. On the other hand, filamentous virions confer an advantage under the pressure exerted by neutralizing antibodies against hemagglutinin.
The development of flexible, conductive biomaterials is key to advancing next‐generation biosensors and wearable health monitoring systems. However, combining printability, mechanical tunability, biocompatibility, and electronic performance within a single hydrogel remains a significant challenge. Here, we present a facile method to fabricate biofunctional conducting poly(ethylene glycol)–poly(pyrrole) (PEG–PPy) hydrogels via 3D‐printing. The soft and flexible PEG–PPy hydrogels feature tunable mechanical properties and can be easily loaded with bioreceptors, enabling integration into sensing platforms. The composite consists of a poly(ethylene glycol) diacrylate matrix and a conductive polypyrrole filler. By optimizing photopolymerization conditions, we enable extrusion printing of complex, multi‐layered structures with excellent shape fidelity (printability ≈ 1). The resulting hydrogels exhibit tunable stiffness (15–120 kPa), high cytocompatibility (>90%), and robust mechanical integrity. Integration of the hydrogel as a gate electrode in an organic electrochemical transistor yielded transconductance values comparable to conventional Ag/AgCl gates, confirming its electrochemical performance. Furthermore, embedding glucose oxidase into the hydrogel enabled enzymatic glucose sensing over a physiologically relevant range (1–100 m m ). This cost‐effective, multifunctional, and versatile PEG–PPy hydrogel platform offers a scalable route toward soft, flexible, printable electronic interfaces.
This study introduces a straightforward method for manufacturing 3D microstructured cell-adhesive and cell-repellent multimaterials using two-photon laser printing. Compared to existing strategies, this approach offers bottom-up molecular control, high customizability and rapid and precise 3D fabrication. The printable cell-adhesive PEG-based material includes an RGD-containing peptide synthesized through solid-phase peptide synthesis, allowing for precise control of the peptide design. Remarkably, minimal amounts of RGD peptide (<0.1 wt%) suffice for imparting cell-adhesiveness, while maintaining identical mechanical properties in the 3D printed microstructures to those of the cell-repellent, PEG-based material. Fluorescent labeling of the RGD peptide facilitates visualization of its presence in cell-adhesive areas. To demonstrate the broad applicability of our system, we showcase the fabrication of cell-adhesive 2.5D and 3D structures, fostering the adhesion of fibroblast cells within these architectures. Thus, this approach allows for the printing of high-resolution, true 3D structures suitable for diverse applications, including cellular studies in complex environments.