This paper deals with the use of a Permanent Magnet Synchronous Generator (PMSG) for the production of wind energy and the injection of the energy produced into a power grid. The objective of this work is to model and simulate the wind energy production system taking into account the problems of the production of electrical energy which are among others: - the problems of maintenance of the generator; - the problems of variations and high wind speed. The contribution of this paper is mainly based on the control strategy of the power generation system based on the Permanent Magnet Synchronous Machine. Then, in order to ensure the real-time tracking of the optimal operating point and to have a maximum production of the electrical power for different wind speeds, we used an FLC speed controller with the aim of increasing this degree of efficiency and improve the performance of our system.
17 December 2024 in STUDIES IN ENGINEERING AND EXACT SCIENCES
This article proposes direct torque control using space vector modulation DTC-SVM. This control strategy is preferred over other solutions, to guarantee performance and reduce torque and flux ripples. In order to better illustrate the effect of C-DTC and DTC-SVM control on the power quality, a spectral analysis of the stator currents THD has been carried out. The simulation results of the proposed controllers are compared for torque changes and flux. It is shown that DTC-SVM has several characteristics, such as simple algorithm, good dynamic response, constant switching frequency. The results proved excellent performance and verify the validity of the proposed system. The behavior of the proposed DTC-SVM scheme is fully verified using Matlab/Simulink software.
This article proposes a Direct Torque Control strategy based on Space Vector Modulation (DTCSVM). This approach offers advantages over conventional methods by improving system performance while significantly reducing electromagnetic torque and stator flux ripples. To further assess the impact of conventional Direct Torque Control (C-DTC) and DTC-SVM on power quality, a Total Harmonic Distortion (THD) analysis of the stator currents was conducted. The performance of both control strategies was evaluated under variations in stator flux and electromagnetic torque. The results demonstrate that the proposed DTC-SVM technique offers several advantages, including a fast dynamic response, a relatively simple implementation algorithm, and a constant switching frequency. Overall, the simulation results reveal improved control performance and confirm the effectiveness of the proposed strategy. The DTC-SVM scheme was validated through simulations conducted using MATLAB/Simulink.