Yaw dampers are implemented on high-speed trains to reduce their tendency towards unstable movement (hunting) while running at high-speed. Although they have a positive influence on the vehicle’s stability, these devices impose a steering resistance action on the bogies while negotiating tight curves at low speed, and so standard passive devices must be designed taking conflicting objective functions into account. This paper presents an innovative yaw damper able to overcome this trade-off by introducing a passive solution able to modify this component’s working behaviour during different vehicle operating conditions. To quantify the efficacy of this solution, numerical models of innovative and standard dampers were developed and validated by means of experimental tests. Then, they were co-simulated with a multibody model of a real test case vehicle running under different operating conditions.
13 June 2023 in Journal of Computational and Nonlinear Dynamics
Hydralic dampers are widely implemented in railway vehicle suspension stages, especially in high-speed passenger trains. They are designed to be mounted in different positions to improve comfort, stability, and safety performances. Numerical simulations are often used to assist the design and optimization of these components. Unfortunately, hydraulic dampers are highly nonlinear due to the complex fluid dynamic phenomena taking place inside the chambers and through the by-pass orifices. This requires accurate damper models to be developed to estimate the influence of the nonlinearities of such components during the dynamic performances of the whole vehicle. This work aims at presenting a new parametric damper model based on a nonlinear lumped element approach. Moreover, a new model tuning procedure will be introduced. Differently from the typical sinusoidal characterization cycles, this routine is based on experimental tests of real working conditions. The set of optimal model parameters will be found through a metaheuristic iterative approach able to minimize the differences between numerical and experimental damper forces. The performances of the optimal model will be compared with the ones of the most common Maxwell model generally implemented in railway multibody software programs.
In recent years, huge investments have been made to improve the dynamic performance of high-speed trains. Research into innovative suspension components has been part of the development of this transport system for decades. Innovative devices can allow rail vehicles to deal with the constantly increasing speed required by the global market. Among the most innovative suspension layouts proposed in railway dynamics in past years, limited attention has been given to Hydraulic Interconnected Suspensions (HIS). This layout is composed of two hydraulic cylinders with external hydraulic connections. Hydraulic Interconnected Suspensions allow promising tuning capabilities due to their ability to offer different responses based on the specific inputs given to the cylinders. This layout is rarely considered for rail vehicles, and the few previous works related to this topic considered the HIS layout to be applied at the secondary suspension stage. In this context, this paper proposes applying an HIS layout to the primary suspension stage of rail vehicles, in order to overcome the trade-offs between ride comfort, running safety and maximum car body displacement that need to be considered by bogie manufacturers when designing and optimising these mechanical systems. A nonlinear physical model of the HIS is proposed for co-simulation with a Multi-body (MB) model of a high-speed train. The improvement provided implementing an HIS at the primary suspension stage is then compared to similar enhancements that could be made when tuning and varying the standard suspension components of a bogie.
This paper aims at analyzing a preliminary layout for a Hydraulic Interconnected Suspension (HIS) for rail vehicles. The device is intended to replace the primary vertical dampers and its design aims at decoupling the heave and roll responses. HIS solution provides additional tuning possibilities to optimize and refine the primary suspension stage of rail vehicles. A physical numerical model is developed, and the influence of three design parameters on the forces generated by the HIS is studied.