High-precision calibration of binocular vision systems plays an important role in accurate dimensional measurements. In this paper, an improved camera calibration method is proposed. First, an accurate intrinsic parameters calibration method based on active vision with perpendicularity compensation is developed. Compared to the previous work, this method eliminates the effect of non-perpendicularity of the camera motion on calibration accuracy. The principal point, scale factors, and distortion factors are calculated independently in this method, thereby allowing the strong coupling of these parameters to be eliminated. Second, an accurate global optimization method with only 5 images is presented. The results of calibration experiments show that the accuracy of the calibration method can reach 99.91%.
High-quality aircraft assembly is critical in aircraft manufacturing. To meet increasing quality demands, the aircraft assembly process needs to be monitored in real time. In recent years, digital twins have attracted increasing interest in different applications. However, due to the heterogeneous data and multiple protocols in the assembly field, the large amount of data needs to satisfy high throughput, low latency, and low storage cost requirements without interrupting the assembly process, which introduces challenges to real-time monitoring systems. In this article, a real-time monitoring system based on the digital twin that provides interactive services for users based on multisource, multidimensional data, and sophisticated analyses is designed. Moreover, we introduce a time series database (TSDB) for dynamic data storage and SQLServer for static data storage. Time series data can be regarded as a standard type of organized data that are convenient for hierarchical representations and constructing multidimensional data cubes for information traceability. The storage cost is significantly reduced because the compression rate reaches 3.8%. Furthermore, the powerful and comprehensive analysis engine of the TSDB ensures that the monitoring system has real-time responses of less than 4 ms. In addition, a flexible and scalable system that collects multidimensional data without affecting the existing workflow is proposed. We perform various experiments to verify the feasibility and effectiveness of assembling large-scale aircraft components. This study provides a solid data foundation for accelerating the pace of intelligent aircraft manufacturing.
19 May 2013 in The International Journal of Advanced Manufacturing Technology
In this article, a concise and practical analytical method of transmitted torque calculation for pre-design of Axial Permanent Magnetic Coupler (APMC) by combining Faraday's law with magnetic circuit model is proposed. The proposed method is able to consider the three-dimension (3D) edge magnetic effect as well as the induced magnetic field generated by eddy currents. The correctional skin depth factor is also taken into consideration. In order to verify the validity of the proposed method, the 3D finite element method (FEM) is employed. The results present that the relative error between the proposed method and 3D FEM in the normal working slip range is within 5.2%. Finally, detailed analysis is carried out to investigate the influence of the common parameters on the transmitted torque for APMC. Moreover, the deficiencies of this proposed method and the corresponding design considerations are also discussed, which offers useful and auxiliary information for the pre-design of APMCs.