An one-dimensional model for contaminant advection and dispersion through a GCL/AL liner system was developed to analyze the equivalence between a GCL (geosynthetic clay liner) and a CCL (compacted clay liner). The continuity of contaminant concentration and flux at the interface between the GCL and the underlying attenuation liner (AL) are obeyed in the model, and background concentrations in the soil liner are also considered. Based on the assumption that contaminant transport through a GCL was a steady state process, an analytical solution was obtained. Increasing the leachate head from 0.3 m to 10 m results in a reduction of the breakthrough time of benzene by a factor of 2.7. The breakthrough time of benzene increases by a factor of 7.0 when the hydraulic conductivity of GCL decreases by one order of magnitude. The breakthrough curves are more sensitive to the hydraulic conductivities of the GCL and AL (attenuation layer) than to the thickness of the AL. The standard 75 cm CCL can be replaced by a combination of a GCL and a 1.0–4.0 m thickness of AL. The proposed method can be used for preliminary design of GCL composite liners, assessing the equivalence between GCL and CCL, preliminary design of a remediation method for contaminated soils, and evaluating experimental results.
22 January 2020 in Journal of Analytical Methods in Chemistry
Sedimentary phosphorus (P) forms are important representatives of P sources and their bioavailability as well as the potential of sediments to release P in water. In this study, surface sediments along a transect of the Changjiang Estuary and two transects along the Andong salt marsh in the southwest of Hangzhou Bay were subjected to the elucidation of sedimentary P species using the standards, measurements, and testing (SMT) and sequential extraction (SEDEX) methods. The results showed that the mean sedimentary P forms elucidated by the SMT method were as follows: organic P (OP; ∼11–14 mg/kg; ∼30–45% of total P; TP) > apatite P (∼5–15 mg/kg; ∼21–36% TP) > Fe/Al-P (∼8–14 mg/kg; ∼31–34% TP), with inorganic P (IP) composing 54–70% of TP. The mean sedimentary P forms elucidated by the SEDEX method were as follows: authigenic P (∼54–68 mg/kg; ∼41–46% TP) > extractable P (Ex-P; ∼36–53 mg/kg; ∼28–34%) > Fe-P (∼21–27 mg/kg; ∼13–19%) > OP (∼8.7–13 mg/kg; ∼5–8%) > detrital P (De-P; ∼2 mg/kg; ∼1–2% TP), with IP composed of ∼91–94% TP. These results showed that the SEDEX method elucidated higher concentrations of sedimentary P forms as well as the TP from these coastal sediments although the SMT method had the advantage of being more economic and faster. The results of both the SMT and SEDEX methods showed that the Andong salt marsh and Changjiang Estuary sediments had much bioavailable P. The mean percentages of bioavailable P from the SMT and SEDEX methods were ∼64–74% and 52–56% of TP, respectively, indicating that these sediments were prone to release P to the coastal areas.
1 June 2013 in Acta Geologica Sinica - English Edition
The hydrocarbon production in the Bawu area of Lishu Depression is high. However, the Bawu area has undergone three main tectonic movements, the strata were strongly uplifted and eroded, and the fractures were extremely developed. The conditions of hydrocarbon preservation have become intricate. In this study, by analyzing isotopes compositions and geochemical features of formation water, and the characteristics of formation pressure, the hydrocarbon preservation can be deduced. The subnormal and lower normal pressure zones (away from Xiaokuan Fault) of Yingcheng and Shahezi Formations are relatively closed and more conducive to hydrocarbon preservation.
26 January 2019 in Petroleum Science and Technology
Reservoir properties of the fourth member of the Xujiahe Formation in the Western Sichuan Depression are quite poor (average porosity =5.9%, average permeability =1.41 mD). These properties were influenced by several diagenetic processes, especially compaction and carbonate cementation. Due to a combination of compaction of ductile fragments and carbonate cementation, sand/mud interfaces of the thick sandstone layer were tightly cemented, pore space also reduced sharply in positions where rich in ductile grains. Thus, space leaving for hydrocarbon is limited, except where both the detrital ductile grain content and carbonate cement content are low.