Motion generation in dynamic environments is crucial for human-machine interaction with redundant manipulators. In this context, we propose the Enhancing Safety and Manipulability (ESM) scheme, which integrates geometry-based dynamic obstacle avoidance, manipulability optimization, trajectory tracking, and joint limit avoidance into a unified scheme operating at the joint-angle level. The introduction of a flexible collision library enables the scheme to locate critical points based on geometry, while the incorporated obstacle speed allows the scheme to effectively avoid dynamic obstacles. In the ESM, manipulability is naturally set as the non-convex goal. To solve the ESM, the Accelerated Multi-agent Optimizer (AMO) is proposed, which adopts a neural network-inspired architecture and uses a meta-heuristic approach to construct activation functions, endowing the optimizer with non-convex control capabilities. Subsequently, a GPU-based parallel computing method is implemented, significantly reducing computing time. Detailed simulations, experiments, and comparisons demonstrate the framework's effectiveness and superiority.
Aiming at the insertion requirements of large space structures during the on-orbit assembly process, a redundant manipulator operation configuration selection method using joint angle variation as a performance evaluation index is proposed, which achieves operation configuration optimization among multiple sets of inverse solutions. At the same time, the risk of collision during installation is reduced. Firstly, the joint angle parameterization method is used to solve all feasible solutions of the redundant manipulator. Then, trapezoidal velocity planning is employed to analyse the operation configuration after the end effector of the manipulator moves a certain distance in different directions of the coordinate system, and the joint weight coefficient is introduced to calculate the weighted value of the angle variation. Finally, select the operation configuration corresponding to the minimum weighted value as the initial configuration for the manipulator. The calculation results show that this method can select an effective solution that satisfies the posture constraints from multiple sets of inverse solutions, giving full play to the redundant characteristics of the SSRMS-type manipulator and ensuring the safety and reliability of the on-orbit assembly process.
The robotic arm of the Wentian module can complete tasks such as supporting astronauts' extravehicular activities, installing and maintaining payloads, and inspecting the space station. The 7-joint SSRMS manipulator is critical for space missions. This study aims to build its kinematic model via screw theory. It simplifies SSRMS to right-angle rods, defines joint screw axes, twist coordinates, and initial pose matrix. Using PoE formula, the 7-DOF forward kinematics equation is derived. Besides, it derives fixed joint angle for inverse kinematics, including analytical solutions and numerical solutions. It elaborates analytical solutions for fixing joints 1/7 and 2/6 and numerical solutions for fixing joints 3/4/5,solves all joint angles via kinematic decoupling, and addresses special cases. Experiments with China’s space station small arm parameters show The probability of meeting the accuracy threshold of 10−4 is 99.79%,verifying model effectiveness, while noting singularity-related weak solving areas. This provides a reliable basis for subsequent inverse kinematics optimization.
SSRMS refers to a Space Station Remote Manipulator System. The robotic arm of the Wentian module can complete tasks such as supporting astronauts’ extravehicular activities, installing and maintaining payloads, and inspecting the space station. The seven-joint SSRMS manipulator is critical for space missions. This study aims to build its kinematic model via screw theory. It simplifies SSRMS to right-angle rods, defines joint screw axes, twist coordinates, and initial pose matrix. Using the PoE (Product of Exponentials) formula, the 7-DOF forward kinematics equation is derived. In addition, it derives fixed joint angle for inverse kinematics, including analytical solutions and numerical solutions. It elaborates analytical solutions for fixing joints 1/7 and 2/6 and numerical solutions for fixing joints 3/4/5, solves all joint angles via kinematic decoupling, and addresses special cases. Experiments with China’s space station small arm parameters show the probability of meeting the accuracy threshold is 99.79%, verifying model effectiveness, while noting singularity-related weak solving areas. This provides a reliable basis for subsequent inverse kinematics optimization.