In this study, the influences of natural fibres (sugarcane bagasse (SB) and sawdust (SD)) on the material properties of polybutylene succinate (PBS) prepared through melt compounding were investigated. The study further evaluated the effects of incorporating halloysite nanotubes (HS) and expandable graphite (EG) on the properties of PBS/SD and PBS/SB binary and PBS/SB/SD hybrid composites. The morphological analysis indicated poor interfacial adhesion between PBS and the fibres. The obtained findings indicated enhancements in the complex viscosity of PBS in the presence of natural fibres, and further improvements in the presence of HS and EG. The stiffness of PBS hybrid composites also increased upon the addition of HS and EG. Moreover, the crystallization temperatures of PBS increased in the presence of fillers, with EG showing better nucleation efficiency. However, the mechanical properties (toughness and impact resilience) decreased due to the increased stiffness of the composites and the poor interfacial adhesion between the matrix and the fillers, indicating the need to pre-treat the fibres to enhance compatibility. Overall, the material properties of PBS/SD/SB hybrid composites were enhanced by incorporating HS and EG at low concentrations.

Water pollution caused by harmful organic pollutants discharged from various industries, such as textiles, pharmaceuticals, papermaking, and printing, is resulting in serious health complications and adversely impacting aquatic life. Numerous strategies/methods have been employed to remove these pollutants from water streams. Amongst them, photocatalysts have proven effective in tackling these issues. Zinc oxide (ZnO) and titanium Dioxide (TiO₂) photocatalysts are at the forefront due to their exceptional properties, which render them ideal for wastewater treatment. However, their full capacity as photocatalysts is limited by the wide band gap and faster electron-hole recombination rates. Metal decoration on the surface of these semiconductors is one of the fascinating strategies to address these limitations. In this brief review, the synthesis, morphology, and photocatalytic activity of ZnO and TiO₂ decorated with metal nanoparticles (NPs) towards the degradation of harmful organic pollutants from various industries are presented. Metal decoration of the surface of ZnO and TiO₂ is a viable method to enhance the photocatalytic activity of these semiconductors, particularly under visible light.

The contamination of water bodies with organic pollutants has emerged as one of the most pressing environmental and public health challenges of the modern era. The continuous discharge of dyes, pesticides, agricultural runoff, and pharmaceutical residues into the aquatic ecosystem degrades water quality. Long-term exposure to these organic pollutants poses a severe risk to human and aquatic life. ZnO and TiO₂ have emerged as promising photocatalysts, particularly for degrading organic waste in wastewater. However, their photocatalytic activity is limited to the UV region due to their wide band gaps. To improve nanoparticle efficiency, polydopamine (PDA) is incorporated as a modifying agent. PDA-modified ZnO and TiO₂ nanocomposites exhibit enhanced photocatalytic activity in the degradation of various organic pollutants under visible light, compared with their unmodified counterparts. Furthermore, they exhibit improved antibacterial activity against a variety of waterborne pathogens; this is advantageous as wastewater contains both chemical pollutants and microorganisms. Thus, the combined photocatalytic and antibacterial properties of PDA-modified ZnO and TiO₂ make them promising materials for next-generation wastewater treatment.

Natural fiber-reinforced biopolymer composites are an attractive class of materials owing to their renewability, sustainability, and eco-friendliness. Meanwhile, fused deposition modeling (FDM) is transforming the manufacturing industry and gaining popularity for fabricating intricate and customized geometries that are difficult to produce with traditional techniques. Recently, FDM printing of natural fiber-reinforced PLA composites (NFRPCs) has emerged as a promising approach for developing sustainable green composites with potential application across diverse fields. This review comprehensively examines recent advances in the development of FDM-printed NFRPCs, with particular emphasis on mechanical and tribological properties. In addition, the review examines life cycle assessment (LCA) studies to evaluate the environmental sustainability of FDM-printed NFRPCs and identifies important gaps that require further investigation. Challenges associated with the processing of NFRPCs, including printability, interfacial adhesion, and optimal printing parameters, are also highlighted. Finally, future research directions are proposed to facilitate the development of high-performance, printable, and environmentally sustainable NFRPCs.