Lower-limb exoskeletons can reduce the therapist's burden and quantify repetitive gait training for patients with gait disorder. For patient's gait training, different walking speeds are required at different rehabilitation stages. However, due to the uniqueness of gait patterns, it is challenging for lower limb exoskeletons to generate individualized gait patterns for patients with different anthropometric parameters. This paper proposed learning-based gait models to learn and reconstruct gait patterns from healthy subject's gait database, including the Gait Parameters Model (GPM) and the Gait Trajectory Model (GTM). The GPM employs Neural Networks to predict gait parameters with a given desired walking speed and the anthropometric parameters of the subject. The GTM utilizes Kernelized Movement Primitives (KMP) to reconstruct gait patterns with the predicted gait parameters. The proposed approach has been tested on a lower limb exoskeleton named AIDER. Experimental results indicate that the reconstructed gait patterns are very similar to the subject's actual gait patterns for varying walking speeds.
4 December 2020 in IEEE Transactions on Automation Science and Engineering
In recent years, lower limb exoskeletons have gained considerable interest in applications of walking assistance for paraplegic patients. In daily lives, the exoskeleton should have the ability to help the patients to walk over different terrains. For sloped terrains, how to plan the stepping locations on slopes with different gradients and generate stable human-like gaits for patients is a critical issue. In this article, we proposed a slope gradient estimator (SGE) based on the sensor data fusion of the exoskeleton and combined SGE with the capture point theory and dynamic movement primitives (DMP) to construct an adaptive gait planning approach for slopes. After learning from demonstrated gaits sampled from healthy subjects, adaptive gait trajectories can be reproduced online to adapt to slopes with different gradients. The efficiency of the proposed approach was demonstrated on an exoskeleton system named AIDER. Experimental results indicate that the proposed approach can endow exoskeletons with the ability to generate appropriate gaits for different slopes. Note to Practitioners-For lower limb exoskeletons, it is a vital problem to plan the gait for sloped terrains. Considering different gradients among slopes, fixed predefined gait planning cannot cover all cases; thus, a slope gradient adaptive gait planning approach is necessary. The slope gradient estimator proposed in this article provides a possible slope gradient estimation method for exoskeletons or humanoid bipedal robots; it is easy to estimate the slope gradient only based on the local sensor data of the robot. The proposed dynamic gait generator provides lower limb exoskeletons and humanoid bipedal robots a possible adaptive gait planning framework and some flexibility for different slopes. The proposed approach may inspire more extended gait planning strategies for other terrains, such as stairs.
Motor imagery-based brain–computer interfaces (MI-BCIs) hold significant promise for rehabilitation training in individuals with neurological impairments such as stroke and spinal cord injury (SCI). Achieving precise and robust lower limb movement prediction for each patient is crucial. However, the variability in MI response frequencies and brain activation patterns among subjects presents a great challenge to the generalizability of MI-BCIs. This paper proposes a Tuned Heuristic Fusion Graph Convolutional Network (THFGCN) for limb movement prediction in rehabilitation scenarios. THFGCN innovatively designs a learnable EEG frequency band tuned module and a heuristic space topology module. These two modules allow for the intricate extraction of both frequency and spatial topological features, utilizing graph adjacency matrices that encapsulate channel correlations and spatial relationships, hence fostering individualized analysis and enhanced generalizability across subjects. Furthermore, a spatio-temporal convolution module paired with a feature map attention mechanism is proposed to extract the critical spatio-temporal features of electroencephalogram (EEG) data. Validation experiments on the PhysioNet and LLM-BCImotion datasets against six mainstream methods demonstrate that THFGCN outperforms state-of-theart methods, achieving 88.41% and 82.82% accuracy in the within-subject case, and 65.93% and 60.56% accuracy in the cross-subject case, respectively. Detailed frequency band weight and T-distributed Stochastic Neighbor Embedding visualization validate the effectiveness of proposed modules. Furthermore, feature interpretability analysis proves the extracted features’ profound MI task relevance, underlining THFGCN’s exceptional interpretability.
10 May 2025 in Engineering Applications of Artificial Intelligence
Object pose estimation has extensive applications in various industrial scenarios. However, the heavy reliance on dense 6-D annotation and textured object models has become a significant obstacle to the widespread industrial application of 6-D object pose estimation methods. In this work, we present SS-Pose , a self-supervised learning framework for estimating 6-D object poses without annotated 6-D data and textured model. SS-Pose proposes the coordinate system datum reinitializer stage to dynamically establish a sequence-level pose representation datum, and the temporal–spatial constraint resolver module to obtain the self-supervised learning target through interframe constraints. We introduce a one-shot cross-coordinate transformation that establishes the relationship between the 6-D representation and the object poses, which can be further utilized in real-world tasks. We evaluated the proposed SS-Pose on the challenging YCB-Video dataset and texture-less T-LESS dataset. Our approach achieves competitive performance with significantly lower data dependency, making it suitable for visual perception in industrial applications.