This paper presents the design and industrial implementation of an adaptive discrete control system for a rotary dryer operating in potash fertilizer production. The drying process is characterized by high inertia, multivariable interactions, transport delay, and non-stationary behavior resulting from variations in raw material properties and external disturbances, which significantly reduce the effectiveness of conventional fixed-parameter controllers. A discrete-time mathematical model of the rotary drying process was developed using industrial experimental data collected from a full-scale production plant. The process was modeled as a coupled 2 × 2 multivariable system with pronounced time-delay effects in the main control channels. System identification was carried out using statistical and frequency-domain methods to capture the dominant dynamic characteristics required for controller synthesis. Based on the identified model, an adaptive discrete controller with online parameter adjustment was developed to regulate outlet moisture content and exhaust gas temperature. Simulation and industrial results confirmed stable operation under varying conditions, improved regulation accuracy, enhanced process stability, and an average production efficiency increase of approximately 1.8%, accompanied by reduced fuel consumption.
We studied the silicon carbide semiconductor compound, which is widely used as the most characteristic material in the preparation of semiconductors. In the radio frequency (RF) mode of the magnetron sputtering device, 300-400 nm thick SiC thin films were formed in an Ar environment as a reactive gas in a vacuum of 10-4 Torr. In the radio frequency mode, a power of 240 W with a frequency of 100 kHz and D=70% were used. The maximum sputtering speed of the magnetron was 50 Ǻ/s. A circular silicon carbide (SiC) target with a diameter of 76.2 mm and a compound content of (99.9%) was used. X-ray analysis of the obtained films was performed on an XRD-6100 device and the Miller indices were determined. In addition, the optical parameters of the thin films were determined. FTIR spectroscopic analysis showed a relative decrease in the transmission spectrum in the far-IR region from 13.1% to 8.9% with increasing SiC film thickness in the range of 480-400 cm-1. Characteristic peaks associated with Si-C and C≡C vibrations were also detected. A characteristic Si-C stretching absorption was observed at a wave number of 780 cm-1, where the IR absorption was 88.7%. At a wave number of 2180 cm-1, it corresponds to a triple covalent bond of C≡C. The results showed that the optical and electrical properties of SiC films can be easily tuned by changing the Si and C concentrations in the coating for the same film thickness.
Greenhouse microclimate regulation is challenging due to nonlinear coupling among temperature, humidity, soil moisture, and light intensity, which limits the effectiveness of conventional threshold-based and PID control strategies under time-varying environmental disturbances. This paper presents a forecast-augmented ensemble control framework that combines Random Forest, Gradient Boosting, and Support Vector Machine classifiers with one-hour-ahead weather forecasts for closed-loop greenhouse microclimate regulation. The proposed system was deployed and validated in a working greenhouse cultivating cucumber (cv. ‘Madora F1’) over 28 consecutive days. Sensor measurements and forecast inputs were processed through a unified preprocessing pipeline, while control actions were generated through majority voting and executed on Raspberry Pi 4B edge hardware with a worst-case inference latency below 18 ms. The proposed framework achieved a temperature RMSE of 0.83 °C during field deployment. For reference, RMSE values of 3.21 °C and 1.94 °C were obtained for the threshold-based and PID baseline controllers, respectively, under the adopted disturbance-consistent evaluation protocol. Compliance rates reached 96.4% for temperature, 94.1% for relative humidity, and 97.2% for soil moisture across 40,320 resampled observation intervals (60 s analysis grid) derived from the original 10 s acquisition stream. Integration of short-term weather forecasts enabled anticipatory irrigation management, reducing irrigation pump operation by 18% without compromising soil-moisture compliance and yielding an estimated annual energy saving of 158 kWh per greenhouse zone. Unlike prediction-oriented greenhouse artificial-intelligence studies, the proposed approach implements a deployable forecast-augmented closed-loop control architecture validated under continuous real-world greenhouse operation.