The global focus on incorporating natural ingredients into the diet for health improvement encompasses ω-3 polyunsaturated fatty acids (PUFAs) derived from plant sources, such as flaxseed oil. ω-3 PUFAs are susceptible to oxidation, but oil-in-water (O/W) emulsions can serve to protect PUFAs from this phenomenon. This study aimed to create O/W emulsions using flaxseed oil and either soy lecithin or Quillaja saponins, thickened with modified starch, while assessing their physical properties (oil droplet size, ζ-potential, and rheology) and physical stability. Emulsions with different oil concentrations (25% and 30% w/w) and oil-to-surfactant ratio (5:1 and 10:1) were fabricated using high-pressure homogenization (800 bar, five cycles). Moreover, emulsions were thickened with modified starch and their rheological properties were measured. The physical stability of all emulsions was assessed over a 7-day storage period using the TSI (Turbiscan Stability Index). Saponin-stabilized emulsions exhibited smaller droplet diameters (0.11–0.19 µm) compared to lecithin (0.40–1.30 µm), and an increase in surfactant concentration led to a reduction in droplet diameter. Both surfactants generated droplets with a high negative charge (−63 to −72 mV), but lecithin-stabilized emulsions showed greater negative charge, resulting in more intense electrostatic repulsion. Saponin-stabilized emulsions showed higher apparent viscosity (3.9–11.6 mPa·s) when compared to lecithin-stabilized ones (1.19–4.36 mPa·s). The addition of starch significantly increased the apparent viscosity of saponin-stabilized emulsions, rising from 11.6 mPa s to 2117 mPa s. Emulsions stabilized by saponin exhibited higher stability than those stabilized by lecithin. This study confirms that plant-based ingredients, particularly saponins and lecithin, effectively produce stable O/W emulsions with flaxseed oil, offering opportunities for creating natural ingredient-based food emulsions.

The aim of this work was to study the impact of the methodology of in vitro gastric digestion (i.e., in terms of motility exerted and presence of gastric emptying) and gel structure on the degree of intestinal proteolysis and lipolysis of emulsion gels stabilized by whey protein isolate. Emulsions were prepared at pH 4.0 and 7.0 using two homogenization pressures (500 and 1000 bar) and then the emulsions were gelled by heat treatment. These gels were characterized in terms of texture analysis, and then were subjected to one of the following gastric digestion methods: in vitro mechanical gastric system (IMGS) or in vitro gastric digestion in a stirred beaker (SBg). After gastric digestion, the samples were subjected to in vitro intestinal digestion in a stirred beaker (SBi). Hardness, cohesiveness, and chewiness were significantly higher in gels at pH 7.0. The degree of proteolysis was higher in samples digested by IMGS–SBi (7–21%) than SBg–SBi (3–5%), regardless of the gel’s pH. For SBg–SBi, the degree of proteolysis was not affected by pH, but when operating the IMGS, higher hydrolysis values were obtained for gels at pH 7.0 (15–21%) than pH 4.0 (7–13%). Additionally, the percentage of free fatty acids (%FFA) released was reduced by 47.9% in samples digested in the IMGS–SBi. For the methodology SBg–SBi, the %FFA was not affected by the pH, but in the IMGS, higher values were obtained for gels at pH 4.0 (28–30%) than pH 7.0 (15–19%). Our findings demonstrate the importance of choosing representative methods to simulate food digestion in the human gastrointestinal tract and their subsequent impact on nutrient bioaccessibility.

This study explores the potential probiotic properties of yeasts isolated from various Chilean honeys, focusing on Ulmo, Quillay, and Mountain honeys. Six yeast strains were identified, including Zygosaccharomyces rouxii, Candida sp., Schizosaccharomyces pombe, Rhodosporidiobolus ruineniae, Clavispora lusitaniae, and Metschnikowia chrysoperlae. Phenotypic characterization involved assessing their fermentative performance, ethanol and hops resistance, and cross-resistance. Ethanol concentration emerged as a limiting factor in their fermentative performance. The probiotic potential of these yeasts was evaluated based on resistance to high temperatures, low pH, auto-aggregation capacity, survival in simulated in vitro digestion (INFOGEST method), and antimicrobial activity against pathogens like Escherichia coli, Staphylococcus aureus, and Salmonella enteritidis. Three yeasts, Zygosaccharomyces rouxii, Schizosaccharomyces pombe, and Metschnikowia chrysoperlae, exhibited potential probiotic characteristics by maintaining cell concentrations exceeding 10⁶ CFU/mL after in vitro digestion. They demonstrated fermentative abilities and resistance to ethanol and hops, suggesting their potential as starter cultures in beer production. Despite revealing promising probiotic and technological aspects, further research is necessary to ascertain their viability in producing fermented foods. This study underscores the innovative potential of honey as a source for new probiotic microorganisms and highlights the need for comprehensive investigations into their practical applications in the food industry.

The growing consumer trend toward plant-based diets is prompting the food industry to seek alternatives to animal protein. Chickpea protein (CPP) stands out for its high protein content (14.9–24.6%) and represents a sustainable alternative. Therefore, this study evaluated and compared the techno-functional performance of CPP and whey protein isolate (WPI), with a focus on their emulsifying capabilities for plant-based food development. CPP was extracted via alkaline extraction and isoelectric precipitation. The techno-functional properties were evaluated, including solubility index (%), foaming capacity (%), emulsion activity index (EAI), gelling, and interfacial properties. Additionally, CPP was used as an emulsifier in plant-based emulsions, and the emulsion stability was compared with WPI for two months. Although CPP exhibited a lower solubility index (60 ± 1.0%) than WPI (95 ± 0.3%), its foaming capacity was identical (CPP: 57 ± 6%; WPI: 58 ± 4%) and exhibited a significantly higher emulsion activity index (22 ± 0.3 m²/g) than WPI (15 ± 0.8 m²/g). In terms of gelation, WPI formed stronger gels (1.2–2.1 N) than CPP (0.05–0.06 N), at the same concentrations. Interfacial tension measurements showed that, while CPP exhibited a higher interfacial saturation concentration (0.055 g/L vs. 0.023 g/L), it was more effective at reducing equilibrium interfacial tension than WPI. Finally, emulsion stability over two months was similar when using CPP or WPI as emulsifiers. CPP demonstrates a competitive functional profile; however, its implementation as a sustainable ingredient will require physical or chemical modifications to improve its functional properties for complex food matrices.

Beeswax is a beekeeping product used in comb foundation manufacturing and in cosmetic, pharmaceutical, and food applications. Data on their physicochemical and rheological behavior remain scarce. We compared capping wax (CW), old comb wax (OW), and foundation wax (FW) from Apis mellifera. FTIR spectra were similar and melting points did not differ significantly (65–66 °C). Color was the most sensitive solid-state property, differing among all samples. At 80 °C, density (821–822 kg·m⁻³) and surface tension (39–41 mN·m⁻¹) were similar. Under concentric-cylinder geometry, flow curves followed the Power Law model, with n = 1.121–1.153, indicating slight shear-thickening behavior; all individual replicate fits returned n > 1, with no statistical differences among wax types. Viscosity remained constant for 30 min at 400 s⁻¹, indicating no thixotropy or rheopexy. A stirrer-type relative geometry returned higher apparent indices (1.734–1.899) and viscosities (45–50 mPa·s); being non-viscometric, these are process descriptors rather than intrinsic constants. Oscillatory rheology near the solid–liquid transition was more discriminating: unlike CW and OW, FW showed no elastic-to-viscous crossover in any replicate within the analyzed strain range. The distinct response of FW may reflect differences in microstructural organization rather than chemical composition, a hypothesis that remains to be confirmed and is potentially relevant to stamping, rolling, and molding.