Alkaline water electrolysis remains one of the leading and most mature technologies for large-scale hydrogen production. Its advantages stem from the use of inexpensive, earth-abundant materials and well-established industrial deployment, yet the technology continues to face challenges, including sluggish hydrogen evolution reaction (HER) kinetics and energy-efficiency limitations compared with acidic electrolysis systems. This review provides a comprehensive overview of the fundamental principles governing alkaline electrolysis, encompassing electrolyte chemistry, electrode materials, electrochemical mechanisms, and the roles of overpotentials, cell resistances, and surface morphology in determining system performance. Key developments in catalytic materials are discussed, highlighting both noble-metal and non-noble-metal electrocatalysts, as well as advanced approaches to surface modification and nanostructuring designed to enhance catalytic activity and long-term stability. Particular emphasis is placed on the emerging strategy of in situ ionic activation, wherein transition-metal ions and oxyanions are introduced directly into the operating electrolyte. These species dynamically interact with electrode surfaces under polarization, inducing real-time surface reconstruction, improving water dissociation kinetics, tuning hydrogen adsorption energies, and extending electrode durability. Results derived from polarization measurements, electrochemical impedance spectroscopy, and surface morphology analyses consistently demonstrate that ionic activators, such as Ni–Co–Mo systems, significantly increase the HER performance through substantial increase in surface roughness and increased intrinsic electrocatalytic activity through synergy of d-metals. By integrating both historical context and recent research findings, this review underscores the potential of ionic activation as a scalable and cost-effective way toward improving the efficiency of alkaline water electrolysis and accelerating progress toward sustainable, large-scale green hydrogen production.

Wooden waste railroad ties preserved with coal tar creosote oil represent a specific source of polluting substances. The aim of this study was to investigate and compare extraction capacity due to solvent extraction of fifteen frequently used organic solvents for the purpose of decontamination treatment of waste wooden railroad ties, while recovering wood for reuse. Pure organic solvents, ethanol 96%, propan-2-ol, deionized water, dichloromethane, acetone, n-hexane, mixture n-hexane/acetone (V/V = 1/1), cyclohexane, methanol, N,N-dimethyl formamide, toluene, ethyl acetate, acetonitrile, amyl acetate, medical gasoline, n-pentane and n-butyl acetate were for leaching pollutants from waste railroad ties. The highest extraction capacity was achieved using dichloromethane, where 7.50 to 7.89 wt.% of total sixteen polycyclic aromatic hydrocarbons were extracted from waste railroad tie chips. The most promising solvents for the treatment exhibited extraction efficiency which decreases in a series dichloromethane > n-hexane/acetone > acetone > methanol > ethanol 96% > propan-2-ol > cyclohexane > toluene > n-hexane. Solvent extraction represents a novel approach for treatment of wooden waste railroad ties. The experiments are based on the search for a management process for the treatment of wood waste railroad ties that is simple, low energy consumption, efficient and could potentially be applied for large scale.

The qualitative characteristics of T-shirts made of 100% cotton and 95% cotton and 5% elastane were investigated before and after 20, 40 and 60 cycles of washing with commercial detergents. The results of the experimental tests were approximated by a nonlinear model of data fitting, which is in the form of a 9th degree polynomial. This defines the deformation characteristics, which can be used to predict the changes that occur within the structure of the knitwear during stress. The results obtained make it possible to pre-design the intensities of forces to which polo shirts can be subjected without compromising their quality. The results also state that T-shirts with elastane have 12% higher values of bursting strength and higher values of forces at the limit of elasticity compared to pure cotton T-shirts. Cotton T-shirts have 21% higher air permeability and 10% higher water vapor permeability. Cotton T-shirts with elastane have a higher surface mass and stitch density per cm-2 compared to pure cotton T-shirts. Paper show the qualitative changes of polo shirts during the six-month maintenance cycle and their deformation characteristics. These findings offer valuable insights into the longevity of polo shirts, potentially guiding manufacturers in designing more durable work uniforms.