Irpan Hidayat

Dr. Irpan Hidayat


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 February 2020 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
APAndrew John Pierre
Andrew John Pierre
IHIrpan Hidayat
Irpan Hidayat
A building that looks strong enough might possibly collapse due to the earthquake load. Earthquake resistant design is generally based on an analysis of elastic structures that are given a load factor to simulate ultimate conditions. When an earthquake occurs, the collapse behavior of a building structure is inelastic. Evaluations that can estimate the inelastic condition of buildings during an earthquake are analyzed using pushover analysis. Pushover analysis is the nonlinear static load of the structural collapse behavior of an earthquake, while the performance point is the magnitude of the maximum displacement of the structure during a earthquake. The inelastic structure analysis and evaluation method used computer application SAP 2000. Evaluation results of structural performance levels according to Applied Technology Council 40 (ATC-40) on the X and Y direction structure, the maximum total drift and total inelastic drift maximum values in the X and Y directions included in the Immediate Occupancy (IO) level category (maximum drift value of a building structure 0.00047 < 0.005).

1 July 2021 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
PDF file
IHIrpan Hidayat
Irpan Hidayat
RSRiza Suwondo
Riza Suwondo
MSMade Suangga
Made Suangga
CPCasey Aufar Pahlevi
Casey Aufar Pahlevi
Developments in the field of photogrammetric technology using UAV (Unmanned Aerial Vehicle) make it easier to represent mapping results quickly and accurately. Along with the growing need for spatial use, both horizontally and vertically, have implications for the need of accurate spatial data both in two-dimensional (2D) or three-dimensional (3D) space. 3D visualization and modeling is a representation of the surface of the earth with the aim of supplying the appearance of the earth along with the whole above it more realistic and able to provide a broader perspective compared to 2D visualization or conventional maps. In this study, the drone-based UAV was used, namely DJI Mavic Air to collect geometric data on the Syahdan campus. The digital data that has been recorded by the UAV is then processed into three-dimensional modeling using DroneDeploy software. DroneDeploy software is cloud-based and is generally used for aerial mapping, in this study it is used in making 3D modeling because of its efficient. The elevation data at each building point measured using a drone-based UAV are compared with the as-built drawing of the Syahdan Campus, Binus. The root mean square value of the comparison of elevation distance between 3D model and as built drawing is 0.47 meters.

14 December 2018 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
PDF file
IHIrpan Hidayat
Irpan Hidayat
MSMade Suangga
Made Suangga
GSGerardo Siagian
Gerardo Siagian

1 December 2017 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
PDF file
IHIrpan Hidayat
Irpan Hidayat
MSMade Suangga
Made Suangga
MMMoh Reshki Maulana
Moh Reshki Maulana
Serviceability of a bridge will decrease based on the function of time. Most likely due to the cyclic load from the traffic. The indicators which can be measured to determine the serviceability is the deflection of the girder. In this research, the PCI-Girder and vehicle load are analyzed by using the finite element method (Midas/Civil) Program. For comparison, the running vehicle test to the bridge has been conducted where the bridge deflections are measured using LVDT sensors on PCI-Girder Bridge. To find the effect of vehicle distance to the LVDV position, the running vehicle goes through on several lanes. The finite element program (Midas/Civil) gives relatively similar result to the measured deflection using LVDT sensors. However, when the vehicle load is situated far from the sensor, the result from both analysis showed significant differences.

14 December 2018 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
PDF file
IHIrpan Hidayat
Irpan Hidayat
MSMade Suangga
Made Suangga
ANAdelia Dwidarma Nataadmadja
Adelia Dwidarma Nataadmadja
YOYoshua
Yoshua
The problems will arrise for concrete stucture submerged under water. The performance concrete will decrease in that concrete such as less compressive strength and permeability. It is needed additive material has a water resistance in concrete mixture. In this research, it proposed crystalline as an additive material. The composition crystalline in concrete mixture is 0.8% from the weight of cement. The concrete mix design as follow SNI 03-2834-2000 standard. The method of concrete mixing used manual tool and concrete mixer. The mixer speed is set in this research are 25, 35, and 50 rotation perminutes (rpm). The delayed of addition crystalline in concrete mixture also done to know the effect of compressive strength concrete. The compressive strength is attained by using manual method and concrete mixer for 25 rpm, it is increased about 5.8% from the control concrete. However, the compressive strength is decreased for the speed of concrete mixer in 35 rpm and 50 rpm. The other additional material such as fly ash poured in concrete with crystalline 0.8%, but it doesn't improve the compressive strength of concrete. The delayed crystalline poured in fresh concrete doesn't affect the compressive strength of concrete.

1 February 2020 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
KSKahfi Ridho Santoso
Kahfi Ridho Santoso
IHIrpan Hidayat
Irpan Hidayat
MSMade Suangga
Made Suangga
When an earthquake occurs, ductility will maintain strength and stiffness in the structure so that the building structure still works even though it is on the verge of collapse. To get a description of the structural behavior starting from the structure in linear elastic, the first yielding of the structural elements until the structure collapse due to earthquake load, it can be done with non-linear static analysis namely pushover analysis. In this study, the geometry of mid-rise reinforced concrete structure consists of four storey buildings. The dimensions of the column structure 400x400 mm and beam structure 250x500 mm, where the dimensions of the beams and columns are the same from the 1st floor to the 4th floor. To find out the behavior that affects the ductility value in mid-rise reinforced concrete structures, a variation material used in this study are the spacing of stirrup, ratio of longitudinal reinforcement, ratio of compressive and tensile longitudinal reinforcement, and compressive strength of concrete. Structural geometry modeling, structural loads, and modeling of material variations used the program SAP 2000. From the output of this program, an analysis of the value of curvature ductility and displacement ductility was performed. The result of this study are the higher the value of compressive strength of concrete and the ratio of longitudinal reinforcement in beam structure will increase the value of ductility. The smaller the value of the spacing of stirrup and the ratio of longitudinal reinforcement in column structure will increase the value of ductility.