The similar crystal structures of martensite (BCT) and ferrite (BCC) cause difficulty in distinguishing the grain orientations of individual phases in dual-phase (DP) steels. A dislocation-based multiphase mixed hardening model is presented, considering both ferrite and martensite strain partitioning, to describe the texture-dependent mechanical behavior of DP steels more precisely. This model is based on the ideals that (i) the volume fractions of the constituent phases and the corresponding strain partitioning function are obtained through in situ tensile experimentation, and (ii) the grain orientations of ferrite and martensite are assumed to be in accordance with the overall texture. We applied the model to calculate the macroscopic and microscopic mechanical behavior of DP800 steel using a crystal plasticity finite element (CPFE) code. The results show that the calculated stress-strain response and textural evolution are in good agreement with the experimental results. The dislocation evolution indicates that the rapid hardening of ferrite induces a high hardening rate for DP steels early in plastic deformation. In addition, for the grains corresponding to the texture center orientations of DP800, the activity and dislocation density evolutions of the slip systems are studied.
The complex strain hardening behaviors of dual phase (DP) steel are subjected to the heterogeneous microstructures. The current work aims to predict the strain hardening behaviors of ferrite-martensite DP steel, focusing on the effects of heterogeneous microstructure on mechanical properties. The flow stress of material was calculated based on the dislocation-based work-hardening model with considering the multi-boundaries hardening. The ferrite-martensite phase boundary percent and grain shape factor were selected as the heterogeneous feature parameters, which were introduced into the new proposed model. The theoretical calculated stress-strain responses were verified with experimental results using the tensile test. The model with the boundary strengthening consideration has more accurate results. The parameter effects of ferrite-ferrite boundary (FFB) spacing, ferrite-martensite boundary (FMB) percent, and grain shape factor on the flow stress-strain curve were researched.
The strain-hardening behavior of metal during the uniaxial tension can be treated as the competing result of generation and annihilation of statistically stored dislocations (SSDs). Geometrically necessary dislocations (GNDs) are generated to accommodate a lattice mismatch and maintain deformation compatibility in dual-phase (DP) steels because of the heterogeneous deformation of the microstructure. In this study, a dislocation-based strain-hardening model that encompasses GNDs was developed to describe the mechanical properties of dual-phase steel. The GNDs were obtained based on a cell model of uniaxial deformation and the SSDs were calculated using a dynamic recovery model. The strain of each phase is a nonlinear function of the overall material strain obtained by the point-interpolation method (PIM). The proposed strain-hardening model was verified by using commercially produced DP600 steel. The calculated results obtained with GNDs are able to predict more precisely the experimental data than that without. The effects of martensite volume fraction and grain size on the strain-hardening behaviors of individual phases and material were studied.
The complex interaction between the soft and hard constituents hinders to understand the macro-micro stress-strain response of multi-phase steels in detail during sheet forming process. In this paper, a constitutive model is developed to predict the mechanical properties of multi-phase high strength steels considering the micro-deformation of individual phases based on the continuum mechanics theory. In this model, a mixture strain hardening law is established with the hypothesis that the strain of individual phase is a function of the macro-strain of material and the stress-strain relationship of individual phase obeys Swift law. A mixture anisotropic yield function for the multi-phase steels is presumed based on the yield function of Hill’48. With the strain hardening law and yield function, the incremental formulation for the multi-phase steels is deduced based on the continuous elasto-plastic theory. And the model is validated by DP590 steel in tensile loading