Ekrem Tusat

Dr. Ekrem Tusat


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 June 2024 in Bulletin of Earthquake Engineering
Verified
Journal Article
Open access
PDF file
EAEmre Ayso
Emre Ayso
İKİrem Köz
İrem Köz
SDSerkan Doganalp
Serkan Doganalp
MAMustafa Aslan
Mustafa Aslan
ETEkrem Tusat
Ekrem Tusat
CTCahit Taşpınar
Cahit Taşpınar
Natural disasters such as earthquakes, storms, floods, landslides, and tsunamis cause significant losses in land and buildings, which are an integral part of human life. This causes inconsistency between the actual situation in the land and official records and brings legal problems with it. In other words, natural disasters negatively affect human life and cause problems in the country’s cadastral system and land ownership and usage. Therefore, after natural disasters, rapid and fair redefinition of cadastral works and land boundaries in the affected areas is an important need of the society and is the basis of trust in the state. In this study, the effects of the 06 February 2023 (Mw = 7.7, Mw = 7.6) Kahramanmaraş and 20 February 2023 (Mw = 6.4) Hatay earthquakes on the cadastral status of the parcels in and around Kırıkhan district of Hatay province were investigated. By modeling the displacements, the deformation sizes of 4044 parcel corner coordinates and 1333 parcel areas were calculated and analyzed. In terms of the protection of property rights in land management, some suggestions were made by presenting concrete findings of coordinate and areal changes.

1 August 2019 in Geomatik
Verified
Journal Article
Open access
PDF file
MKMuzaffer Kahveci̇
Muzaffer Kahveci̇
ETEkrem Tusat
Ekrem Tusat
FYFerruh Yildiz
Ferruh Yildiz
FSFatih Sari
Fatih Sari
FMFariz Mi̇kAi̇lSoy
Fariz Mi̇kAi̇lSoy
Global Konum Belirleme Sistemlerinin (GNSS) çok yüksek doğruluklar sağlamaya başlamasıyla birlikte, uygulamada kısa sürede yüksek doğruluklu jeoit yüksekliklerinin elde edilmesi gereksinimi de önemli ölçüde artmıştır. Örneğin, mühendislik uygulamalarında ve CBS çalışmalarında ortometrik yükseklikler kullanıldığı için yerel jeoit belirleme çalışmaları daha da önem kazanmıştır.Bilindiği gibi Türkiye tektonik olarak aktif bir bölgede olup, farklı zamanlarda meydana gelen depremler ülke nivelman ağındaki noktaların düşey konumlarında deformasyonlara/değişimlere neden olmaktadır. Diğer taraftan Ülke Temel Jeodezik Ağlarının kurulması ve yaşatılmasından sorumlu olan Harita Genel Müdürlüğü (HGM; eski adıyla Harita Genel Komutanlığı), 1999 yılından bu yana GNSS ölçülerinden yararlanarak farklı yıllarda güncel Türkiye Jeoidi modelleri hesaplayarak, kullanıcıların hizmetine sunmaktadır. HGM tarafından bu güne kadar hesaplanmış olan jeoit modellerinin dış doğrulukların genel olarak 10 cm’den daha iyi olmadığı değerlendirilmektedir. Oysa kullanıcıların ihtiyacı olan bu doğrulukların 10 cm’den daha iyi olması arzu edilen bir durumdur. Söz konusu doğruluklara ulaşılıp ulaşılamayacağının araştırılması için Selçuk Üniversitesi olanakları ile pilot bir uygulama yapılması hedeflenmiş ve bu amaçla sadece İç Anadolu’nun belirli bir kesimini kapsayacak yerel gravimetrik jeoit ve geometrik yaklaşımla yaklaşık(quasi)-jeoit hesaplanması için Konya Selçuk Üniversitesi kaynakları kullanılarak bir bilimsel araştırma projesi başlatılmıştır.Söz konusu proje bölgesine ilişkin mevcut GNSS ve nivelman verilerine ilaveten gravite verileri arazide ölçülmüş ve mutlak gravite değerleri, TG-03 kestirim değerleri gibi bazı diğer veriler de HGM’den temin edilmiştir. Yerel quasi-jeoit hesabında Karlsruhe Üniversitesi Uygulamalı Bilimler Enstitüsü tarafından geliştirilmiş ve proje kapsamında temin edilmiş olan DFHRS (Sonlu Elemanlı Yükseklik Referans Sistemi) yazılımı kullanılmıştır. Söz konusu yazılım sürekli polinomsal yükseklik referans sistemi ve GNSS ile elde edilen elipsoidal yüksekliklere dayalı olarak jeoit yüksekliklerinin N(φ, λ, h) parametrik modellenmesi prensibine dayanmaktadır. Bu yazılım ile yapılan hesaplama sonucunda 10 cm’den daha iyi doğruluklu yerel quasi-jeoit elde edilmesi sağlanmıştır. Aynı noktalardaki GPS/Nivelman jeoidi, DFHRS hesap ve TG-03 kestirim değerleri birbirleriyle karşılaştırılmıştır. Netice olarak, bu makalede proje kapsamında sadece geometrik yaklaşımla hesaplanmış olan quasi-jeoit modeline ilişkin yapılmış olan çalışmalar ile ulaşılmış olan ara sonuçlar sunulmaktadır.

1 December 2019 in Geomatik
Verified
Journal Article
Open access
PDF file
SESümeyra Ervural
Sümeyra Ervural
ETEkrem Tusat
Ekrem Tusat
GPS ile konum belirlemede, konum belirleme yöntemine ve hedeflenen doğruluğa bağlı olarak iki farklı yörünge bilgisinden bahsedilebilir. Bunlar; yayın (broadcast) efemerisi ve hassas (precise) efemerisdir. Gerçek zamanlı konum belirlemede yayın efemerisi kullanılmakta olup yaklaşık 1-10 m doğruluğu elde etmek olanaklıdır. Ancak daha yüksek doğruluk beklenen uygulamalar ve özellikle ölçü sonrası büro hesaplamaları ile konum belirleme (statik GPS) için IGS hassas efemeris verileri tercih edilmektedir. Yayın efemeris bilgileri dünyaya dağılmış GPS Kontrol Bölümü izleme istasyonları tarafından yapılan gözlemler yardımıyla üretilmekte ve anlık olarak yayınlanmaktadır. Hassas efemeris verileri ise IGS yörünge bilgilerinden yararlanılarak 24 saat boyunca 30 saniye aralıklarla yapılan gözlemlerin değerlendirilmesiyle oluşmaktadır. Bunun sonucunda haftalık hassas efemerisler yayınlanmaktadır. Bir navigasyon mesajı şeklinde yayınlanan bu efemeris verileri herhangi bir zamanda uydunun anlık konumunun hesaplanabilmesini sağlayan bir Kepler elipsini ifade eder. Bu çalışmada ilk olarak 1 Ocak 2018 tarih 00:00 zamanına ait yayın efemerisi bilgisinden hesaplanan X, Y ve Z koordinatları ile aynı zamana ait IGS sonuç hassas efemeris verisi arasında karşılaştırma yapılarak yayın ve hassas efemeris verilerinin koordinatlar üzerindeki etkisi incelenmiştir. Daha sonra 31 Aralık 2017 tarih 22:00 zamanı ile 1 Ocak 2018 tarih 02:00 zamanı arasında 15 dakika aralıklarla X, Y ve Z koordinatları hesaplanmış ve aynı şekilde hassas efemeris verileriyle farkları alınmıştır. Bu uygulamada seçilen zamanın değiştirilmesiyle elde edilen yayın efemerisi ve hassas efemeris verileri aralarındaki farklar incelenmiştir.

24 December 2024 in Contributions to Geophysics and Geodesy
Verified
Journal Article
Open access
PDF file
OPOya Ankaya Pamukçu
Oya Ankaya Pamukçu
AÇAyça Çirmik
Ayça Çirmik
FDFikret DOGRU
Fikret DOGRU
ETEkrem Tusat
Ekrem Tusat
FUFatih Uysal
Fatih Uysal
ZEZülfikar Erhan
Zülfikar Erhan
With the increasing rate of subduction along the Hellenic Arc in the Eastern Mediterranean, the seismic activities of the Aegean plate and Western Anatolia have markedly increased over the past decade. The increase in seismic activity is quite remarkable, starting from the coasts of Çanakkale in the north of Western Anatolia, including Lesbos Island, Samos Island, Kuşadası Bay and Datca. In this context, in order to determine the current deformation after the Samos Island earthquake that occurred on October 30, 2020, measurements were performed at six continuous GNSS stations in and around Izmir. This study is jointly managed by Dokuz Eylül University, with contributions from Konya Technical University and Atatürk University, focusing on both GNSS and seismological analyses. The preliminary results of this investigation include the evaluation of seismic impacts on the continuous GNSS stations from July 1st to December 31st, 2022.

13 March 2026 in Geosciences
Verified
Journal Article
Open access
PDF file
AKAbdullah KELLEVEZİR
Abdullah KELLEVEZİR
ETEkrem Tusat
Ekrem Tusat
Mustafa Tevfik ÖzlüdemirMustafa Tevfik Özlüdemir
Mustafa Tevfik Özlüdemir
The Earth’s lithosphere, the rigid outermost layer of the planet, is composed of numerous tectonic plates of varying sizes that move over the underlying asthenosphere. The motion and interaction of these plates give rise to a wide range of geodynamic processes. Accurate monitoring of these processes is essential for maintaining a stable, up-to-date, and reliable terrestrial reference frame. This study investigates the horizontal and vertical motions of the Antarctic Plate resulting from its interactions with adjacent plates. Tectonic plate movements can be determined using several space-geodetic techniques, including Global Navigation Satellite Systems (GNSS), Very Long Baseline Interferometry (VLBI), Satellite Laser Ranging (SLR), and Interferometric Synthetic Aperture Radar (InSAR). Among these methods, GNSS is currently the most widely used, as plate motions can be derived from continuous observations recorded at permanent stations and processed using scientific or commercial software. Within the scope of this research, GNSS data collected between 2020 and 2023 were processed using the GAMIT/GLOBK V.10.7 software package to estimate the coordinates and velocities of stations located on the Antarctic, South American, African, and Australian Plates in the ITRF14 reference frame. Furthermore, plate-fixed solutions were generated to analyze the relative motion of the Antarctic Plate with respect to neighboring plates. The results indicate that the Antarctic Plate moves at an average velocity of approximately 4–18 mm/year in the ITRF14 frame. The plate diverges from both the African and Australian Plates and exhibits predominantly strike-slip motion relative to the South American Plate. A comparison with existing global plate motion models demonstrates that the obtained velocities are consistent within 0–5 mm/year.

1 January 2025 in Geofizika
Verified
Journal Article
Closed access
FDFikret DOGRU
Fikret DOGRU
OPOya Ankaya Pamukçu
Oya Ankaya Pamukçu
GSGabriela Quintana Sánchez
Gabriela Quintana Sánchez
AÇAyça Çirmik
Ayça Çirmik
ÖÖÖzkan Cevdet Özdağ
Özkan Cevdet Özdağ
FÖFulya Özdemir
Fulya Özdemir
In this study, geodynamic processes in the Western Anatolia Region were analyzed using Interferometric Synthetic Aperture Radar (InSAR) and Global Navigation Satellite Systems (GNSS) data, incorporating wavelet transformation of InSAR time series based on GNSS observations. InSAR data were processed over a six-year period to produce line of sight (LOS) displacement maps. Ascending and descending track data were merged to derive information on both horizontal and vertical displacements. The InSAR-derived displacements were then compared with GNSS station data from the region to assess variations in the east and up components obtained by both techniques. Significant horizontal and vertical displacements were detected. While the Menemen Plain experienced a subsidence of up to 15 centimeters over a six-year period, the island of Samos experienced a rise of 29 centimeters. The performance of InSAR results was evaluated against GNSS data using Root Mean Square Error (RMSE). The RMSE values significantly decreased after applying corrections to the InSAR processing, indicating improved accuracy. For the DEUG station, the RMSE between InSAR and GNSS time series improved to 1.93% in the east component and 5.29% in the vertical component after wavelet-based noise removal. At the IZMI station, the RMSE was reduced to 2.62% (east) and 6.00% (vertical). Finally, at the CES1 station, the RMSE was reduced to 2.71% for the east component and 5.84% for the vertical component, all after correction.