There is an urgent need to improve the corrosion resistance of WC-based cermet coatings in different corrosive environments. The main objective of this work was to investigate the microstructure and evaluate the corrosion resistance in neutral, acidic, and alkaline electrolytes of the WC-based cermet/Fe-based amorphous alloy composite coating. Thus, a composite coating of WC–CoCr/Fe-based amorphous alloy and a single WC–CoCr coating were fabricated using the high-velocity oxygen fuel (HVOF) process. The phase composition, microstructure of the original powders, and as-sprayed coatings were studied. The detailed interface information between different compositions of the composite coating was observed by high-resolution transmission electron microscopy (HRTEM). The corrosion resistance of the coatings was studied comparatively by electrochemical tests in 3.5 wt % NaCl, 1 M HCl and 1 M NaOH solutions, respectively. Results showed that the composited coating had a dense layered structure with a composition of WC, Fe-based amorphous alloy, and small amount of W₂C. It was revealed that obvious inter-diffusion exists between the interfaces of tungsten carbide/Co, Cr binder and WC–CoCr/Fe-based amorphous alloy. The electrochemical test results showed that the composite coating displayed better corrosion resistance than single WC–CoCr coating both in 3.5 wt % NaCl solution and in 1 M NaOH solution.