Long glass fiber reinforced thermoplastic composites have been increasingly used in automotive parts due to their excellent mechanical properties and recyclability. However, the effects of strain rates on the mechanical properties and failure mechanisms of long glass fiber reinforced polypropylene composites (LGFRPPs) have not been studied systematically. In this study, the effects of strain rates (from 0.001 s⁻¹ to 400 s⁻¹) on the mechanical properties and failure mechanism of LGFRPPs were investigated. The results showed that ultimate strength and fracture strain of the LGFRPPs increased obviously, whereas the stiffness remained essentially unchanged with the strain rates from low to high. The micro-failure modes mainly consisted of fibers pulled out, fiber breakage, interfacial debonding, matrix cracking, and ductile to brittle (ductile pulling of fibrils/micro-fibrils) fracture behavior of the matrix. As the strain rates increased, the interfacial bonding properties of LGFRPPs increased, resulting in a gradual increase of fiber breakage at the fracture surface of the specimen and the gradual decrease of pull-out. In this process, more failure energy was absorbed, thus, the ultimate strength and fracture strain of LGFRPPs were improved.

Aiming to solve the persistent problem of edge cracking in magnesium alloy cast-rolling, this numerical simulation study introduces an innovative magnetic field-assisted approach. Utilizing Lorentz force, the process dynamically transforms the solidification front morphology from an arc-shaped (“Ɔ”) to a linear (“1”) configuration. Simulation results reveal that, while magnetic field-induced thermal effects minimally impact the solidification front, the Lorentz force fundamentally alters the flow field dynamics. This modification yields a more uniform temperature distribution and reduces velocity gradients between the symmetric center and edge regions, thereby promoting the transition to a linear solidification front essential for synchronous solidification and deformation across the entire plate width. Furthermore, variations in magnetic field intensity and frequency critically influence vortex flow position and density within the cast-rolling zone. The optimization goal was to maximize the angle α between the side surface and solidification front, which characterizes the linearity of the front. With optimized parameters of 0.49 T magnetic field intensity and 8 Hz frequency, angle α reaches 65°. This marks a 62.5% increase compared to the conventional (non-magnetic) cast-rolling scenario and achieves a near-linear (“1”) solidification profile.