Depending on their structure and order (individual, films, bundled, buckypapers, etc.), carbon nanotubes (CNTs) demonstrate different values of thermal conductivity, from the level of thermal insulation with the thermal conductivity of 0.1 W/mK to such high values as 6600 W/mK. This review article concentrates on analyzing the articles on thermal conductivity of CNT networks. It describes various measurement methods, such as the 3-ω method, bolometric, steady-state method and their variations, hot-disk method, laser flash analysis, thermoreflectance method and Raman spectroscopy, and summarizes the results obtained using those techniques. The article provides the main factors affecting the value of thermal conductivity, such as CNT density, number of defects in their structure, CNT ordering within arrays, direction of measurement in relation to their length, temperature of measurement and type of CNTs. The practical methods of using CNT networks and the potential directions of future research in that scope were also described.

Carbon nanotubes (CNTs) are materials with exceptional electrical, thermal, mechanical, and optical properties. Ever since it was demonstrated that they also possess interesting thermoelectric properties, they have been considered a promising solution for thermal energy harvesting. In this study, we present a simple method to enhance their performance. For this purpose, thin films obtained from high-quality single-walled CNTs (SWCNTs) were doped with a spectrum of inorganic and organic halide compounds. We studied how incorporating various halide species affects the electrical conductivity, the Seebeck coefficient, and the Power Factor. Since thermoelectric devices operate under non-ambient conditions, we also evaluated these materials' performance at elevated temperatures. Our research shows that appropriate dopant selection can result in almost fivefold improvement to the Power Factor compared to the pristine material. We also demonstrate that the chemical potential of the starting CNT network determines its properties, which is important for deciphering the true impact of chemical and physical functionalization of such ensembles.

Charge transport properties in single-walled carbon nanotubes (SWCNTs) can be significantly modified through doping, tuning their electrical and thermoelectric properties. In our study, we used more than 40 nitrogen-bearing compounds as dopants and determined their impact on the material's electrical conductivity. The application of nitrogen compounds of diverse structures and electronic configurations enabled us to determine how the dopant nature affects the SWCNTs. The results reveal that the impact of these dopants can often be anticipated by considering their Hammett's constants and pK_a values. Furthermore, the empirical observations supported by first-principles calculations indicate that the doping level can be tuned not only by changing the type and the concentration of dopants but also by varying the orientation of nitrogen compounds around SWCNTs.

Despite the widespread use of sonication for individualization of nanomaterials, its destructive nature is rarely acknowledged. In this study, we demonstrated how exposure of the material to a hostile sound wave environment can be limited by the application of another preprocessing step. Single-walled carbon nanotubes (CNTs) were initially ground in a household coffee grinder, which enabled facile deagglomeration thereof. Such a simple approach enabled us to obtain high-quality CNT dispersion at reduced sonication time. Most importantly, electrical conductivity of free-standing films prepared from these dispersion was improved almost fourfold as compared with unground material eventually reaching 1067 ± 34 S/cm. This work presents a new approach as to how electrical properties of nanocarbon ensembles may be enhanced without the application of doping agents, the presence of which is often ephemeral.

Single-walled carbon nanotubes (SWCNTs) demonstrate unique properties of both electrical and thermal conductivity, but at the moment of producing a network composed of multiple nanotubes, these values sharply decrease. It is associated with the presence of defects in the nanotube network structure, as well as with the dissipation phenomena at the junctions between SWCNTs. One of the methods to alleviate this problem is doping. In our study, we obtained a film made of high-quality SWCNTs doped with three types of iodonium salts: Barluenga’s reagent (bispyridineiodonium tetrafluoroborate, IPy₂BF₄), pyridine iodine monochloride (IPyCl) and diphenyliodonium chloride (DPIC). We recorded a significant improvement in electrical properties after doping with IPy₂BF₄ and IPyCl, by as much as 224% and 322%, respectively. What is more, we noted improvement in thermal conductivity, which amounted to over 50% when the material was doped with IPyCl. Our research indicates that permanent doping of CNT-based ensembles is possible with iodonium salts. The process significantly improves electrical conductivity, and the compounds themselves are more convenient to work with rather than when other halogen-based dopants are used commonly for this purpose.

Single-walled carbon nanotubes (SWCNTs) remain one of the most promising materials of our times. One of the goals is to implement semiconducting and metallic SWCNTs in photonics and microelectronics, respectively. In this work, we demonstrated how such materials could be obtained from the parent material by using the aqueous two-phase extraction method (ATPE) at a large scale. We also developed a dedicated process on how to harvest the SWCNTs from the polymer matrices used to form the biphasic system. The technique is beneficial as it isolates SWCNTs with high purity while simultaneously maintaining their surface intact. To validate the utility of the metallic and semiconducting SWCNTs obtained this way, we transformed them into thin free-standing films and characterized their thermoelectric properties.