The successful transport of a sheet electron beam under the periodic cusped magnet (PCM) focusing at the terahertz frequencies is reported. The sheet beam with a current density of 285 A/cm² is intended for the developing G-band sheet-beam traveling-wave tube (TWT) whose operating voltage is nominally 24.5 kV. A beamstick was developed to validate the design of the electron optics system, which is considered as the most challenging part for developing a sheet-beam device. A beam transmission ratio of 81% is achieved over a distance of 37.5 mm at a cathode voltage of −25.0 kV. The total current and the collector current were measured to be 125 and 102 mA, respectively. The experimental results are promising, demonstrating that the PCM scheme is capable of focusing a high-current-density sheet beam and hence can find use in the terahertz TWTs, offering the advantages of compact size and light weight.

Practical development of terahertz technology requires higher power radiation sources. The sheet electron beam vacuum device is an effective solution of increasing the output power of terahertz radiation sources, but faces the difficulty of stable transmission of the beam. In this paper, a compact quadrupole permanent magnet (QPM) focusing system for terahertz sheet beam devices is designed, and a practical focusing system is constructed into a prototype for beam transmission verification. In the experiment, 16 pieces of high-performance NdFeB permanent magnets were adopted with a total weight of about 10 kg. The magnetic field test of the system was carried out and the results show that the system can provide a uniform high-intensity magnetic field of over 0.95 T within an axial length of 20 mm. With the tested QPM magnetic field configuration, PIC simulation of the sheet beam transmission was implemented, indicating that a sheet electron beam with a 20 kV voltage and 15 mA current can travel through a beam tunnel of a cross-section 0.1 mm × 0.05 mm, with a transmission ratio of 98.5%.