Adsorption is an effective and low‐cost technique for dye removal from wastewater, motivating the development of sustainable adsorbent materials. However, studies on biochar–bentonite composites derived from babassu coconut shell (Attalea speciosa) remain limited. This study systematically investigated, for the first time, the influence of pyrolysis temperature on the physicochemical, structural, thermal, and adsorption properties of babassu shell biochar–bentonite composites for methylene blue removal. Biochars were produced at 350, 450, and 550 °C, and composites containing 5 wt% bentonite were characterized by FTIR, XRD, SEM/EDS, and TGA/DTG. Increasing the pyrolysis temperature promoted carbonization, aromatic condensation, and thermal stability, while bentonite incorporation preserved the smectite structure, improved mineral dispersion, and enhanced the structural stability of the composites. Adsorption performance increased with both pyrolysis temperature and adsorbent dosage, with BC550‐5B exhibiting the highest adsorption capacity (73.89 mg/g). Equilibrium data were best fitted by the Langmuir model (R2 = 0.975). In contrast, kinetic analyses showed that BC550 followed the PFO model, and BC550‐5B was better described by the PSO model, indicating the contribution of heterogeneous active sites introduced by bentonite. These findings demonstrate that pyrolysis temperature and mineral modification act synergistically to produce efficient, potentially cost-effective, and sustainable adsorbents for wastewater treatment.