Nanofluid is a suspension of nanoparticles which is promising heat transfer fluid in the heat transfer enhancement having a plethora of applications because of its superior thermal conductivity and rheological properties. This paper points out the previous studies and recent progress in the improvement of heat transfer using nanofluid. The recent progresses on preparation and enhancement of stability were reviewed. Thermophysical, heat transfer characteristics of nanofluid and different factors such as particle size, shape, surfactant, temperature, etc. on thermal conductivity were presented. The present study reveals potential applications by utilizing nanofluid such as heat exchanger, transportation cooling, refrigeration, electronic equipment cooling, transformer oil, industrial cooling, nuclear system, machining operation, solar energy and desalination, defense, etc. Few barriers and challenges were also addressed. Finally, the challenges and further research opportunities were presented.
Biogas, a source of renewable energy is produced from bacteria in the process of biodegradation of organic matter under anaerobic conditions. A research work was performed to find out the production of biogas from cow dung using charcoal and gelatin as additives. Five laboatory scale experimental set-up were constructed using 0, 0.2, 0.4, 0.6 and 0.8% gelatin with cow dung as additive to perform the research work. For all the set-up 0.5% charcoal was also added. All the set-ups were made from 1-liter capacity conical flask. The amount of water and cow dung was used respectively 382 gm. and 318 gm. in every set-up. Total solid content was maintained 8% throughout all set-ups. The digesters were operated at ambient temperature of 26°-32°C. The total gas yield without using gelatin additive was found to be 12 L/kg cow dung. The maximum gas yield was found from 0.2% gelatin additive and 23% more as compared to without gelatin gas production. The retention time varied from 28 to 79 days for the experiments.
In this experiment pyrolysis of coconut shell is done for bio-oil production using infrared radiation as heat source. For this a methodology is structured and experimental setup is prepared for pyrolysis. After cooling of pyrolysis product bio-oil is collected, weighted and tested for different fuel properties. Infrared pyrolysis is a relatively new technology and very few investigation is done about it. The obtained biofuel and char has a calorific value of 22.95M J/kg, 17.85 M J/kg and bio-oil’s dynamic viscosity is 17 centipoise at 20°c. A maximum oil yield of 43 wt. % is found after 35 minutes of pyrolysis at a heating rate of 40°c/min till 410°c then gradually increasing it to 510°c for remaining time. An oil yield of 38 wt. % is observed after 20 minutes of beginning of pyrolysis which only increases by 4 wt. % in next 20 minutes. So, pyrolysis can be done only for 20 minutes for optimization in production process.
A research work was conducted to investigate the enhanced production ability of biogas from mesophilic anaerobic digestions of cow dung (CD) using gelatin as additive. Five laboratory scale digesters were constructed to digest cow dung, where one set up was used for digestion of cow dung without additive and the other set up were used for digestion with additive. Gelatin additive was added in the slurry of amount 0.29, 0,57, 0.85 and 1.14% (wt.). The digesters were made of glass conical flask of 1-liter capacity each. Cow dung was used 335 gm and water was used 365 gm in each experiment. In the slurry, total solid content was maintained 8% (wt.) for all the observations. The digesters were fed on batch basis. The digesters were operated at ambient temperatures of 26 – 35°C. The total gas yield was obtained about 14.4 L/kg CD for digestion without additive and about 65% more biogas for digestion with 0.29% gelatin additive. The retention time for digestion without additive was 38 days and with additive retention time varied between 24 and 52 days.