In the field of highway construction, the application of styrene–butadiene rubber (SBR)-modified asphalt has gained popularity across different levels of road surfaces. A crucial aspect in ensuring the efficacy of this modification lies in the compatibility between SBR and the matrix asphalt. To address this, the current study utilizes molecular dynamics simulation as a technique. By establishing a model for the SBR-modified asphalt mixture, the research quantifies the compatibility level between the SBR modifier and the asphalt. The aim is to uncover the underlying mechanisms of compatibility between the SBR modifier and the base asphalt, ultimately contributing to the improvement of the storage stability of SBR-modified asphalt, which holds significant importance. The investigation began with the creation of models for both the base asphalt and the SBR modifier. A model for the SBR-modified asphalt blending system was then formulated based on these initial models. After undergoing geometry optimization and annealing procedures, the model attained its lowest energy state, providing a reliable basis for examining the performance of SBR-modified asphalt. The study proceeded to calculate solubility parameters and interaction energies of the system to evaluate the compatibility between the SBR modifier and the base asphalt at various temperatures. The analysis of these parameters shed light on the compatibility mechanism between the two components. Notably, it was found that at a temperature of 160 ℃, the compatibility was significantly enhanced. The findings were further corroborated through scanning electron microscope and rheological tests. The outcomes of this research offer theoretical guidance for the application of SBR-modified asphalt.

As a plasticizer, vegetable oil can improve the compatibility between straw fibers and an asphalt matrix and promote the uniform dispersion of fibers, thereby improving the viscoelastic properties of the composite material. This paper selected three vegetable oils: tall oil, rapeseed oil, and palm wax. Through dynamic shear rheology tests, low-temperature bending beam rheology tests, contact angle tests, and infrared spectroscopy tests, the vegetable-oil-reinforced straw fiber modification was analyzed from different points of view. The research results show that palm wax significantly improves the high-temperature rheological properties of straw-fiber-modified asphalt but has a negative impact on low-temperature properties. Tall oil can most significantly improve the low-temperature rheological properties of straw-fiber-modified asphalt. Rapeseed oil has the most obvious effect in improving the adhesion and water damage resistance of straw-fiber-modified asphalt. In addition, the research shows that all three vegetable oils exist in the modified asphalt in adsorbed form, and no new compounds are generated. These research results provide theoretical guidance value for the application of straw-fiber-modified asphalt pavement in different environments.

Graded mixture segregation is one of the primary reasons of variability of pavement performance, which then causes the premature damage of pavement. But to date, there is little systematic research on this issue. In view of the research status of mixture segregation, the article puts forward the stockpiles experiment. Based on samples from different regions of stockpile and the indicators of calculated mean square deviation, four pairs of graded mixture comparison tests were performed. The paper also described the segregation characteristics of mixtures from different perspectives and proposed an evaluation index distinguishing the magnitude of segregation. Based on the evaluation index, the segregation characteristics of four pairs of graded mixture can be sorted and the result was in agreement with the engineering practices.