All-inorganic, hole-transporting-layer-free CsPbIBr2 perovskite solar cells have great potential for development, but their device performance needs to be further improved. Recently, metal nanostructures have been successfully applied in the field of solar cells to improve their performance. Nano Ag-enhanced power conversion efficiency (PCE) in one CsPbIBr2 perovskite solar cell utilizing localized surface plasmons of Ag nanoparticles (NPs) on the surface has been researched experimentally and by simulation in this paper. The localized surface plasmon resonance of Ag NPs has a near-field enhancement effect, which is expected to improve the light absorption of CsPbIBr2 perovskite photovoltaic devices. In addition, Ag NPs have a forward-scattering effect on the incident light, which can also improve the performance of CsPbIBr2-based perovskite photovoltaic devices. By directly assembling Ag NPs (with a size of about 150 nm) on the surface of fluorine-doped tin oxide it is found when the particle surface coverage is 10%, the CsPbIBr2 perovskite photovoltaic device achieves a best PCE of 2.7%, which is 9.76% higher than that of the control group. Without changing any existing structure in the ready-made solar cell, this facile and efficient method has huge applications. To the best of our knowledge, this paper is the first report on nano Ag-enhanced photoelectric conversion efficiency in this kind of CsPbIBr2 perovskite solar cell.
The polarization of light is recognized as a key physical quantity in describing light-matter interactions. Polarizers are fabricated to selectively respond to light beams with different polarizations. In practice, the operations of a polarization measuring setup require bulky and expensive terminal photodetectors, e.g., a spectrophotometer, to measure the spectral responses associated with different polarizations. To get rid of the unfavorable reliance on conventional photodetectors, polarizers having a Cu-ZnO junction for efficient hot-electron extraction have been designed to give rise to direct electrical readouts. Detailed photoelectric studies reveal that the designed device excites guided-mode resonances with which the device exhibits polarization-dependent energy depositions in absorbable Cu, leading to distinct electrical responses between transverse electric and transverse magnetic polarizations. The electrical extinction ratio increases from 2.7 to 4.4 when the resonance wavelength increases from 767 nm to 869 nm.
29 January 2026 in Journal of Colloid and Interface Science
Antimony selenosulfides (Sb2(S, Se)3) has garnered significant attention due to its exceptional optoelectronic properties. The quality of the Sb2(S, Se)3 thin film is pivotal for its role as the light-absorbing layer in solar cells and directly impacts device performance. This study depicts for the first time the use of N, N-dimethylformamide as an assisting solvent in the hydrothermal deposition process for producing semitransparent solar cells based on Sb2(S, Se)3 thin films. Comparative analysis with the traditional hydrothermal deposition method using water as the sole solvent reveals a substantial reduction in surface pinholes of the Sb2(S, Se)3 thin film, thereby mitigating current leakage resulting from direct contact between the electron transport layer and electrode. X-ray diffraction characterization demonstrates enhanced crystallinity with [021] orientation in the improved Sb2(S, Se)3 thin film, facilitating improved carrier transport. Furthermore, the dark J–V curve reveals that the reverse saturation current of the Sb2(S, Se)3 solar cell with the traditional hydrothermal method is 3.45 x 10-6 mA/cm2, whereas for the enhanced Sb2(S, Se)3 solar cell, it is 4.65 x 10-7 mA/cm2, indicating reduced carrier trapping by defects. These findings reveal that the fill factor of devices obtained through solvent-assisted hydrothermal deposition method with N, N-dimethylformamide as an assisting solvent increased from 35.06% to 40.96% and achieved the power conversion efficiency of 3.23%, representing a 50% improvement of the power conversion efficiency over those obtained through traditional hydrothermal deposition without any assisting solvent. The average visible light transmittance was about 9.17%.
Hot-electron photodetectors (HE-PDs) convert photon-excited hot carriers into photocurrents. Although optical resonances often have multiple orders, how the resonance order influences HE-PD performance remains unclear. Using a coaxial Ag–TiO2 nanowire as a model system, we investigate the role of Mie resonance order |m| in the Ag–TiO2 junction. For coaxial nanowires, the Mie resonance order and the device geometry are intrinsically coupled because higher-order Mie resonance necessarily requires a larger TiO2 core. By fixing the Ag shell thickness at 8 nm and varying only the TiO2 core radius, we excite pure Mie resonances from the first to the eighth order at an identical wavelength of 900 nm. We find that |m| directly determines the spatial distribution of hot-electron generation and indirectly leads to increasing separation between the generation site and the metal–semiconductor interface with a rise in |m|. Moreover, the internal quantum efficiency of the designed HE-PD decreases under the combined effect of the device size and |m| variation, which is attributed to the increased hot-electron travel distance in the coaxial structure and the reduced transport probability. In contrast, external quantum efficiency, which convolutes photon absorption with internal quantum efficiency, increases with |m| and reaches its maximum at the sixth order because of the highest normalized absorption cross section at |m| = 6. In addition, both the absorption and external quantum efficiency spectra narrow, and their linewidths decrease as the resonance order increases. Overall, our study highlights the critical role of |m| intrinsically coupled with device geometry in HE PD performance, deepening our understanding of resonance order effects in hot-electron devices.