Tool fault diagnosis in numerical control (NC) machines plays a significant role in ensuring manufacturing quality. Tool condition monitoring (TCM) based on multisensors can provide more information related to tool condition, but it can also increase the risk that effective information is overwhelmed by redundant information. Thus, the method of obtaining the most effective feature information from multisensor signals is currently a hot topic. However, most of the current feature selection methods take into account the correlation between the feature parameters and the tool state and do not analyze the influence of feature parameters on prediction accuracy. In this paper, a multisensor global feature extraction method for TCM in the milling process is researched. Several statistical parameters in the time, frequency, and time–frequency (Wavelet packet transform) domains of multiple sensors are selected as an alternative parameter set. The monitoring model is executed by a Kernel-based extreme learning Machine (KELM), and a modified genetic algorithm (GA) is applied in order to search the optimal parameter combinations in a two-objective optimization model to achieve the highest prediction precision. The experimental results show that the proposed method outperforms the Pearson’s correlation coefficient (PCC) based, minimal redundancy and maximal relevance (mRMR) based, and Principal component analysis (PCA)-based feature selection methods.

Recent advances in artificial intelligence (AI) technology have led to increasing interest in the development of AI-based tool wear condition monitoring methods, heavily relying on large training samples. However, the high cost of tool wear experiment and the uncertainty of tool wear change in the machining process lead to the problems of sample missing and insufficiency in the model training stage, which seriously affects the identification accuracy of many AI models. In this paper, a novel identification method based on finite-element modeling (FEM) and the synthetic minority oversampling technique (SMOTE) is proposed to overcome the problem of sample missing and sample insufficiency. Firstly, a few tool wear monitoring experiments are carried out to obtain experimental samples with low cost. Then, a FEM model based on the Johnson–Cook constitutive model was established and verified according to the experimental samples. Based on the verified FEM model, the simulated missing sample in the experiments can be supplemented to compose a complete training set. Finally, the SMOTE is employed to expand the sample size to construct a perfect training set to train the SVM classification model. End milling tool wear monitoring experiments demonstrate that the proposed FEM-SMOTE method can obtain 98.7% identification accuracy, which is 30% higher than that based on experimental samples. The proposed method provides an effective approach for tool wear condition monitoring with low experimental cost.