The growing demand for lithium batteries with higher energy densities requires new electrode chemistries. Lithium metal is a promising candidate as the anode material due to its high theoretical specific capacity, negative electrochemical potential and favorable density. However, during cycling, low and uneven lithium ion concentration on the surface of anode usually results in uncontrolled dendrite growth, especially at high current densities. Here we tackle this issue by using lithiophilic montmorillonite as an additive in the ether-based electrolyte to regulate the lithium ion concentration on the anode surface and thus facilitate the uniform lithium deposition. The lithiophilic montmorillonite demonstrates a pumping feature that improves the self-concentrating kinetics of the lithium ion and thus accelerates the lithium ion transfer at the deposition/electrolyte interface. The signal intensity of TFSI− shows negligible changes via in situ Raman tracking of the ion flux at the electrochemical interface, indicating homogeneous ion distribution, which can lead to a stable and uniform lithium deposition on the anode surface. Our study indicates that the interfacial engineering induced by the lithiophilic montmorillonite could be a promising strategy to optimize the lithium deposition for next-generation lithium metal batteries.
All‐solid‐state batteries (ASSBs) based on inorganic solid electrolytes fascinate a large body of researchers in terms of overcoming the inferior energy density and safety issues of existing lithium‐ion batteries. To date, the cathode designs in the ASSBs achieve remarkable achievements, adding the urgency of scaling up the battery system toward inorganic solid‐state pouch cell configuration for the application market. Herein, the recent developments of cathode materials and the design considerations for their application in the pouch cell format are reviewed to straighten out the roadmap of ASSBs. Specifically, the intercalation compounds and the conversion materials with conversion chemistries are highlighted and discussed as two potentially valuable material types. This review focuses on the basic electrochemical mechanisms, mechanical contact issues, and sheet‐type structure in inorganic solid‐state pouch cells with corresponding perspectives, thus guiding the future research direction. Finally, the benchmarks for manufacturing inorganic solid‐state pouch cells to meet practical high energy density targets are provided in this review for the development of commercially viable products.
Lithium–sulfur (Li–S) cells have been regarded as attractive alternatives to achieve higher energy densities because of their theoretical specific energy far beyond the lithium-ion cells. However, the achieved results of Li–S cells are exaggerating the cycle performance in their pouch formats because the considerable works are based on the coin cells where flood electrolyte and endless Li supply ensure the Li metal with nature structure features, resulting in a negligible effect on cycle performance caused by the Li dendrites and electrolyte dissipation during cycles. Herein, we demonstrate a strategy to enable the Li metal with lithium fluoride (LiF)-rich solid electrolyte interface via integrating a reinforced interface (RI) embedded with nano-LiF particles on the surface of the Li metal anode. The RI interface enables the solvent molecules of the electrolyte to gain fewer electrons from Li anode, resulting in a lower leakage current of assembled RI||Li–S cell (~ 0 μA) than pristine Li anode (~ 1.15 µA). Moreover, these results show that suppressing lithium dendrite growth is more urgent than inhibiting the shuttle effect of polysulfides in the pouch cell format. As a result, the RI layer-engineered Li metal bears witness to the cyclic stability of Li anode over 800 h, thus achieving stable cycles of Ah-scale Li–S pouch cell with an energy density of 410 Wh/kg at a current of 200 mA per cell. Our study demonstrates that the suppression of lithium dendrites by the RI could be a promising method to prolong the cycle number of Li–S pouch cells.