Conventional fabrication processes for fiber-reinforced composites are complex and stepwise, limiting their application in blast protection engineering. In this study, KH550 surface-modified glass fiber powder (1.5 wt%) was incorporated into a polyurea matrix, and a homogeneous glass fiber-reinforced polyurea (GFRPU) composite was successfully synthesized via an optimized one-step spray process. The strain-rate-dependent mechanical behavior (0.01–100 s−1), fracture mechanisms, molecular structure, and blast mitigation performance of GFRPU were systematically investigated through mechanical testing, SEM, FTIR, 75 g TNT contact explosion tests, and calibrated and partially verified finite element simulations. Results show that the surface-modified fibers form chemical crosslinks with the matrix, shortening the N–H hydrogen bond length from 3.023 Å to 2.983 Å and increasing the hydrogen bonding degree of the urea carbonyl region from 80.0% to 84.1%, thereby enhancing structural ordering and strength. At a strain rate of 100 s−1, the tensile strength of GFRPU reaches 50.27 MPa, 26% higher than that of the polyurea matrix. Under contact explosion, a 4 mm back-face GFRPU coating reduced the center-point deflection of the steel plate by 31.6% and suppressed brittle cracking, with interfacial debonding and coating tensile failure as the dominant failure modes. Considering protective efficiency and structural safety, 4 mm is recommended as the optimal coating thickness.
In response to the challenge of achieving highly reliable interface fabrication in the fields of microelectronics and micro-electromechanical system (MEMS) packaging, this study harnesses the superior characteristics of solid-state bonding inherent in explosive welding (EXW) technology. This study investigates the precise EXW of milligram-scale metallic foils by employing focused laser energy to control the explosion behavior of liquid energetic materials, thereby generating shockwaves that induce high-velocity oblique collisions between metallic foils and base plates. Laser-focused energy was utilized to regulate energetic materials for conducting precision EXW experiments on Al/Cu couples. The technical feasibility and interfacial quality of this method for fabricating Al/Cu bonding interfaces were systematically evaluated through in situ observation of the dynamic welding process, comprehensive analysis of interfacial microstructures, and numerical simulations. The results reveal distinct Al/Cu elemental diffusion at the bonding interface, confirming the technical viability of the approach. However, an unloading rebound phenomenon is observed at the interface, which is inherently associated with the dynamic impact process, indicating the need for further optimization in the precise control of impact loading.