The strain rate effect influences the mechanical properties on most construction materials and its investigation is critical for structural engineering. Current materials such as steel or concrete have been intensively investigated. However, similar studies on the dynamic properties of masonry or masonry components such as clay brick or mortar are scares. This paper intends to study the behavior of masonry and its usual components (clay brick and mortar) when subjected to high strain rates. A drop-weight impact machine is used at different heights and weights introducing different levels of strain rate. Empirical relations of dynamic increase factors (DIFs) are derived from the experimental results and the strain rate effect on compressive strength, compressive fracture energy, strain at peak strength, and Young’s modulus are determined and presented.
22 August 2012 in Journal of Earthquake Engineering
This paper presents a study of the seismic behavior of the “Old Municipal Chambers” building in Christchurch, which was damaged by earthquakes in 2010 and 2011. In view of its seismic vulnerability and retrofitting, finite element and equivalent frame models were used for pushover analysis. Predictions allow identifying the weak parts of the building and its expected failure modes, which are in agreement with the observed damage. Computations seem however conservative, because the building capacity curves provide insufficient strength to survive the registered earthquakes. By considering the floors as bidirectional diaphragms in the simplified model, a better behavior is observed.The authors gratefully acknowledge Professor Jason Ingham and his research group at University of Auckland for providing experimental data in Christchurch and their recommendations on materials properties to be expected. The two first authors acknowledge the financial support from the Portuguese Foundation for Science and Technology (FCT) through Ph.D. grants SFRH/BD/41221/2007 and SFRH/BD/45436/2008