This study investigated the potential use of ash derived from Municipal Solid Waste (MSW), typically destined for landfill in Israel, as a partial replacement for cement and aggregates in concrete mixtures, aligning with circular economy and sustainable construction objectives. MSW samples (post-metal and large plastic remains removal), supplied by the Dudaim Reclamation Center in Israel, were incinerated under controlled conditions in an upgraded laboratory furnace to produce ash. The ash content in the Israeli MSW was 18% ash. The ash consisted mainly of calcium-based minerals, including anhydrite (CaSO4), alite (3CaO·SiO2), and calcite (CaCO3), with minor quartz content, indicating potential pozzolanic behavior. The characterization results showed that appreciable amounts of ash produced from MSW incineration in Israel can be used as a partial replacement for cement and fine aggregates when properly treated. This study successfully established a laboratory-scale incineration process for Israeli MSW. The resulting ash was characterized, confirming its potential as a raw material for concrete applications, thereby paving the way for future studies on its performance as a partial substitute for cement and fine aggregates in concrete blends.
This study (Part B) examines the potential utilization of municipal solid waste (MSW) ash, produced in a semi-industrial incinerator in Israel, as a partial substitute for cement and natural sand in industrial concrete mixtures. The ash was produced at the temperature range 600–850 °C, and the ash was characterized using XRD and SEM to determine its mineralogical composition and morphology. The results indicate that ash composition is dominated by calcium-rich phases, with hatrurite (Ca3SiO5) representing approximately 51–66 wt.% of the identified crystalline phases, along with calcite, MgO, and silica phases. The ash consists of irregular, porous particles with a broad distribution. Concrete performance was evaluated in both fresh and hardened states. In terms of fresh concrete properties, it is observed that concrete containing ash showed improved workability, better workability retention, and better concrete density compared to concrete without ash. In terms of hardened concrete properties, the use of MSW ash as a partial sand replacement preserved the mechanical performance of the concrete, with compressive strength remaining within approximately 2% of the reference mixture. These findings suggest that semi-industrially produced MSW ash is more suitable as a fine aggregate replacement than as a supplementary cementitious material and represents a promising route for reducing landfill disposal and promoting circular economy practices in the construction industry.