The International Roughness Index (IRI) is an indicator used worldwide for the characterisation of longitudinal road roughness. This study summarised IRI limit values for new, reconstructed, or rehabilitated roads; for in-service (existing) roads; and road classification schemes used around the world. An overview of practices in 35 US states and 29 non-US states was provided. Limit values are a function of road surface type, road functional category, road speed limit, road construction type, or average annual daily traffic (AADT). IRI specifications are defined for a broad range of evaluation lengths from several metres to the entire length of a section. Large differences in IRI limit values were observed for the same segment length among various countries. The IRI-based methodology used in US states was compared with that used in non-US countries. Non-US countries used more often specifications as a function of road functional category and AADT, and are based on percentile of IRI observations. US states used more often pay adjustment and specifications as a function of road construction type and road speed limit.
11 October 2017 in Journal of Testing and Evaluation
Nowadays, synthetic longitudinal road profiles based on an ISO 8608 road classification are used for simulation purposes to solve various tasks in vibration analysis of mechanical and civil structures and road-vehicle-driver interaction system. Standard ISO 8608 specifies road classification of longitudinal road profiles based on vertical displacement power spectral density (PSD). PSD represented on logarithmic scales is characterized by two parameters of a straight line, an unevenness index and waviness. The aim of this study was to compare spectrum parameters of real roads with ISO 8608 road classes used in scientific papers. Road classes that were used in a sample of 27 current scientific papers were analyzed. Results often indicated marked differences among road classes used for simulation purposes in comparison to the spectrum properties of real roads. For simulation purposes, road Class A may be recommended as representative of typical good or average quality road (motorway, expressway, and first class road). Classes B and C may be appropriate to simulate low-quality paved surfaces (2nd and 3rd class roads or local highways).
This study identified longitudinal road roughness limit values based on measured vibration induced in a road-vehicle-driver interaction system. The relations between measured vehicle vibration response and the international roughness index (IRI) were summarized. Frequency-weighted acceleration on the seat and dynamic load coefficient (DLC) were used to quantify ride comfort, ride safety, and the dynamic load of the vehicle and road. Linear relationship coefficients were identified or taken from references. The expected large range of vibration response root mean square (RMS) values was observed for the same level of IRI. IRI limit values were derived for chosen threshold values of vehicle vibration response as a function of vehicle velocity. Velocity-related IRI limit curves were proposed based on the fitting of IRI limit values lower envelope. IRI limit curves were compared with threshold proposals of other authors and width thresholds used in road maintenance. Some of the estimated IRI limit cur...
This study is aimed quantify dissipated power in a damper of automobile suspension to predict energy harvesting potential of a passenger car more accurately. Field measurements of power dissipation in a regenerative damper are still rare. The novelty is in using the broad database of real road profiles, a 9 degrees-of-freedom full-car model with real parameters, and a tyre-enveloping contact model. Results were presented as a function of road surface type, velocity and road roughness characterised by International Roughness Index. Results were calculated for 1600 test sections of a total length about 253.5 km. Root mean square of a dissipated power was calculated from 19 to 46 W for all four suspension dampers and velocity 60 km/h and from 24 to 58 W for velocity 90 km/h. Results were compared for a full-car model with a tyre-enveloping road contact, full-car and quarter-car models with a tyre–road point contact. Mean difference among three models in calculated power was a few per cent.
23 February 2015 in International Journal of Pavement Engineering
Paper summarised the proposals of fourteen new alternative indexes intended for road roughness evaluation of longitudinal road profile, which have been introduced in the last decade approximately. The main advantages of proposed indexes are: (1) effort to reflect the most of ride quality aspects such as ride comfort, ride safety and dynamic load of road or cargo; (2) using the in situ measurements of vibration response or subjective perception of vibration; (3) effort to reflect the vehicle responses such as roll and pitch vibration, or longitudinal and lateral vibration; (4) effort to detect the critical parts of road in a spatial domain; and (5) effort to reflect a vehicle velocity. The main limitations of proposed indexes are: (1) many proposals are only alternative to the international roughness index (IRI) or are based on the IRI procedure; (2) a simple one-dimensional vehicle model is often used with the constant parameters and velocity; and (3) orientation to one vibration response category as ride comfort.