Though the interconnected active suspension enhances the performances of roll dynamics along with the primary functions of passive suspension, it requires an external pressurized fluid supply. Also, higher energy is required to attain the variable damping force in an active interconnected system. Therefore, this research attempts to control the vehicle roll without an external fluid supply by novel semi-active based roll-resistant interconnected suspension system (SARR-HIS). The variable damping is achieved by utilizing the pressure developed in the chambers and hydraulic control valve (HCV), while the suspension compresses. The amount of the flow passes through the HCV is controlled by a model predictive controller. In addition, GA based optimization were performed to identify the optimal passive roll-resistant hydraulic interconnected suspension (PRR-HIS) parameters. For the controller design, vehicle plant model is estimated by the simple identification method in Matlab environment. On the AMESim platform, vehicle with SARR-HIS system integrated model was built and controlled in a co-simulation environment. To assess the effectiveness of the proposed suspension and its control strategy, the anti-roll bar (ARB) integrated passive standalone suspension, optimized PRR-HIS, and proposed SARR-HIS systems are tested under C class road roughness without steer and double lane change maneuver.
14 February 2014 in Journal of Mechanical Science and Technology
Momordica charantia L. is an essential oil-bearing plant of the family Cucurbitaceae. Not much has been described about the plant on literature survey. Gas Chromatography/Mass Spectrometry (GC/ MS) analysis of the essential oil reported the presence of major volatile components, such as 5-(Hydroxymethyl) -2-(1-methyl-2-imidazolyl)-1H-benzimidazole (79.18 %) and as 2-Cyclohexen-1-one, 2-methyl-5-(1-methylethenyl), (R)- (13.90 %). The essential oil mainly consists of Benzimidazoles (79.18 %) and oxygen derivative monoterpenoids (13.09 %) in the total oil. The essential oil exhibited strong activity against all the tested bacteria such as Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae and Staphylococcus aureus, and antifungal activity against Candida tropicalis. The highest percentage of inhibition by the essential oil was found against the bacteria, K. pneumoniae followed by E. coli, S. aureus and P. aeruginosa respectively, and the fungi C. tropicalis. The present result revealed that essential oil of M. charantia seed possesses potent antimicrobial properties and could be taken as a source for the production of future antimicrobial drugs. This is the first report where the major compound 5-(Hydroxymethyl)-2-(1-methyl-2-imidazolyl)-1H-benzimidazole (79.18 %) was isolated from M. charantia seed oil from the Western Ghats of South India. Key word: Momordica charantia, essential oil, GC/MS, inhibition, antimicrobial properties.
20 September 2023 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
When a tyre blows out, the vehicle’s trajectory deviates from the intended path, resulting in an accident and death. Because of its larger contact patch, applying more steering force to the flat tyre will cause the tyre to separate from the wheel. Also, improper braking effort causes rollover related issues due to the sudden vehicle’s centre of gravity (C.G.) displacement and weight transfer towards the blow-out tyre. Therefore, this research attempts to return the C.G. to its initial position through the suspension control. The force supplied between the sprung and unsprung masses of the flat tyre through suspension actuator is estimated and controlled by the model predictive control (MPC) scheme with respect to its input signals. For the non-linear simulation, the four-wheel passenger car vehicle dynamic model and the combined empirical model for the tyre inflation pressure effect are used. And the equivalent plant model is identified through a simple system identification method for the MPC design. The passive and active based suspension of standalone, roll-resistant interconnected and pitch-resistant interconnected systems, including the proposed comfort-lateral trajectory controlled standalone active suspension, were examined. To assess the effectiveness of each suspension and its control strategy in a tyre blow-out scenario, a vehicle was analysed with various longitudinal velocities along with and without steer input.
30 April 2025 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Vehicle rollover and wheel lift-off are undesirable under certain conditions, reducing the vehicle handling ability and causing serious accidents/fatalities. However, the conventional suspension structure repeatedly fails to meet the requirements in dynamic conditions due to its passive characteristics. Although active suspension systems improve roll dynamics, an excessive amount of energy demand is required, and implementation in vehicles is a major hindrance. A smart suspension structure with less power consumption is required to supply pressurized fluid adequately as needed to achieve safety and comfort. Attaining instantaneous pressurized fluid with minimal power has proved to be a formidable challenge. A novel semi-active suspension system is proposed using a 4/3 hydraulic control valve, which requires minimal power to attain a variable force. Through the proposed architecture, the roll and yaw stability was improved by minimizing the lateral load transfer along with the suspension objectives. To assess the dynamical characteristics and the ability of the proposed structure, the vehicle model was investigated under double lane change and slalom tests. The proposed suspension structure with a model predictive controller (MPC) was tested experimentally using dSPACE MicroAutoBox III hardware. The results show that the proposed suspension system provides a significant improvement in enhancing vehicle safety. The proposed system considerably improves the performance of the lateral load transfer ratio by 30% over that of conventional systems.