MARTIN Ouma Osemba

Dr. MARTIN Ouma Osemba

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 January 2024 in International Journal of Advanced Research
Verified
Journal Article
Open access
PDF file
MARTIN Ouma OsembaMARTIN Ouma Osemba
MARTIN Ouma Osemba
MMMary Muriuki-Hutchins
Mary Muriuki-Hutchins
SKSamuel Karenga
Samuel Karenga
GKGodfrey Keru
Godfrey Keru
The amino polysaccharide of chitin polymer happens to be the most commonly known polymer. Chitosan as a derivative of chitin is obtained through demineralization and deacetylation. Owing to the special properties of chitin and chitosan for instance their bio-compatibility, bio-biodegradability, non-toxicity and also capability to form films, have resulted in their suitability in chemical and thermal conductivity applications. In the field of nanotechnology, chitosan-based materials are currently being widely applied. The purpose of this review is to synthesize and characterize chitosan obtained from the crab shells. The absorption band obtained from FTIR between 1220 cm−1 and 1020 cm−1 represented free amino group (−NH2). The 40.000 grams of powdered crab shells resulted in the formation of 23.000g of chitin after undergoing the process of demineralization to eliminate the minerals available in the crab shells. The removed minerals from the crab shells constituted 17.000 g (39.53%) of the total dry weight in the crab shell. The water binding capacity (WBC) was found to be 69 %.

6 January 2024 in International Journal of Advanced Research
Verified
Journal Article
Open access
PDF file
MARTIN Ouma OsembaMARTIN Ouma Osemba
MARTIN Ouma Osemba
LOLoice Ojwang
Loice Ojwang
JMJustin Maghanga
Justin Maghanga
Azo dyes are carcinogenic and if taken would lead to debilitating adverse health effects in animals, man and aquatic organisms. In this study, novel Boron Doped Diamond (BDD) electrodes coated with silver nanoparticles were applied. Iron (11) sulphate was used as a supporting electrolyte and silver nanoparticles as electrocatalyst to enhance the degradation efficiency. Degradation efficiency was monitored by UV-VIS spectrometry while some of the physico-chemical parameters were determined by standard methods for examination of water and wastewater as outlined in the APHA (2000). The absorption spectra for the four dyes were determined and their λ max ranged between 470 to 590 nm in UV-VIS spectrum. Colour removal of 100% was achieved at the end of the electrochemical degradation. The colour levels of the treated textile wastewater were found to be BDL. The final treated wastewater was compared with National Environmental Management Authority (NEMA) and World Health Organization (WHO) effluent discharge standards for the possibility of re-use or direct discharge to a natural water course. From the study findings, it is evident that the concentration of the dyes considered efficient for colour removal was 10 ppm since there was less power consumption thus economical. An increased concentration from 0.1 to 0.5 g/l of FeSO4 was added to act as a supporting electrolyte to enhance quick removal of the dye. As the concentration of silver nanoparticles increased from 0 to 8 ppm lowest power of 0.4536 watts within the group mean value of 0.03±0.0023 time (hours) and 0.63±0.0001 current (amperes) was recorded. Therefore, it was concluded that a greater concentration of AgNPs acted effectively as the electrocatalyst to eliminate the barrier during the dye removal process. In all four experiments using different kinds of textile dyes, it was worth noting that an increase in the inter-electrode distance from 2mm to 8 mm led to a decrease in the current production from 1.23±0.0140 A - 0.58±0.0048 A which resulted to a lot of time taken from 0.025±0.0012 hr -0.723±0.0047 hr. The aspect of temperature was also considered under the above optimal conditions, and at 45ºC the removal was faster as there was an increase in the chemical kinetics of the particles in the reaction system. As the pH increased from 4.0 to 7.0, current production increased from (0.21±0.0005-0.24±0.0014 A). From the group, analyzed pH range of 6.5±¬0.5 was noted to enhance better removal of the studied azo dye from the textile wastewater effluent. The textile azo dye colour was removed to below detectable levels (BDL) and thus could not be detected by human eye after treatment

25 September 2024 in International Journal of Pure and Applied Chemistry
Verified
Journal Article
Open access
PDF file
MARTIN Ouma OsembaMARTIN Ouma Osemba
MARTIN Ouma Osemba
MMMary Muriuki-Hutchins
Mary Muriuki-Hutchins
SKSamuel Karenga
Samuel Karenga
GKGodffrey Keru
Godffrey Keru
This study sought to find a suitable technique for synthesizing and characterizing silver nanoparticles due to its applications in various fields such as nanotechnology and medical. The synthesized silver nanoparticles were characterized using SEM microscopy, FT-IR and UV-Vis spectroscopy. The maximum absorbance from the UV-Vis spectrophotometer showed the formation of silver nanoparticles with λ max of 418 nm. The FTIR analysis envisaged a strong symmetrical stretching at 1400 cm-1 to 1200 cm-1 with the major peaks recorded at 1390 cm-1 and 1380 cm-1, indicating the presence of nitro components in the sample. The signal at 1658 cm−1 corresponded to the amide (C=O) bonds stretching vibrations, at 1089 cm−1 C-O-C bonds and at 564 cm−1 plane with bends NH, plane-out and bends C−O. C-H stretching vibrational signal was noted at 2927 cm−1, and a broader band at 3426 cm−1 with an overlap between the O−H stretching vibration and N−H stretching vibration of the oligosaccharide applied in the capping. The concentration of chitosan on transmittance was done using 0.5%, 1.0%, 1.5% and 2.0% solutions with the results from FT-IR showing elaborate intensity at 2.0 % chitosan capping and the least at 0.5 %. Scanning microscope validated characterized silver nanoparticles morphology at 500nm. The results obtained from SEM depicted a size range of 100 nm with resolutions between 0.5 to 4 nm

17 March 2026 in Research Square
Verified
Preprint
Open access
PDF file
MARTIN Ouma OsembaMARTIN Ouma Osemba
MARTIN Ouma Osemba
Polyvinyl alcohol/chitosan (PVA/CS)–based nanocomposite films incorporating indium tin oxide (ITO) nanoparticles were successfully synthesized via a solution-casting technique to investigate their structural, linear, and nonlinear optical properties. ITO nanoparticles were introduced at concentrations of 2–5 wt% to tailor the optoelectronic performance of the polymer matrix. X-ray diffraction analysis revealed a progressive enhancement in crystallinity with increasing ITO content, evidenced by an increase in crystallite size from 25.7 to 32.8 nm and a concomitant reduction in dislocation density and microstrain, indicating improved structural ordering. FTIR and Raman spectroscopy confirmed strong interfacial interactions between ITO nanoparticles and the PVA/CS matrix, including characteristic Sn–O vibrations and shifted ITO phonon modes, validating successful nanoparticle incorporation. SEM and EDX analyses demonstrated uniform nanoparticle dispersion at low loadings, with the onset of agglomeration observed at 5 wt% ITO. UV–Vis–NIR spectroscopy showed a systematic reduction in optical transmittance and a red shift in the absorption edge with increasing ITO content. The optical band gap decreased from 4.49 to 4.13 eV, attributed to the formation of localized states and enhanced electronic interactions within the nanocomposite. Optical constants, dielectric parameters, and dispersion energies derived from the Wemple–DiDomenico and Sellmeier models exhibited pronounced enhancement with ITO loading, reflecting increased polarizability and charge carrier density. Photoluminescence measurements revealed concentration-dependent quenching behavior and defect-related emissions, indicating modified recombination dynamics. Furthermore, significant improvements in third-order nonlinear optical susceptibility (χ⁽³⁾) and nonlinear refractive index (n₂) were observed, driven by reduced band gap energy and increased electronic polarization. These results demonstrate that low-level ITO incorporation effectively tailors the structural and optoelectronic properties of PVA/CS nanocomposites, highlighting their strong potential for advanced applications in flexible optoelectronics, photonic devices, nonlinear optics, and sensing technologies.

17 March 2026 in Research Square
Verified
Preprint
Open access
PDF file
MARTIN Ouma OsembaMARTIN Ouma Osemba
MARTIN Ouma Osemba
Zinc oxide (ZnO) nanoparticles were successfully synthesized via a microwave-assisted green route employing starch as a stabilizing matrix and chitosan as a biopolymeric capping and surface-functionalizing agent. Glucose served as a mild reducing agent, while microwave irradiation provided rapid and energy-efficient heating. The synthesis strategy aligns with green chemistry principles by minimizing hazardous reagents, reducing reaction time, and enabling controlled nanoparticle growth. UV–Vis spectroscopy revealed a characteristic excitonic absorption peak at 373 nm, confirming nanoscale ZnO formation. The optical band gap estimated from the Tauc plot was approximately 3.26 eV, indicating slight quantum confinement effects. FT-IR analysis showed a distinct Zn–O stretching vibration at 476.52 cm⁻¹ along with residual –OH and –NH₂ surface groups derived from starch and chitosan. XRD patterns confirmed the formation of phase-pure hexagonal wurtzite ZnO with an average crystallite size of 18–25 nm. SEM and TEM analyses revealed near-spherical nanoparticles with moderate aggregation, while EDX confirmed stoichiometric Zn and O composition with minor carbon and nitrogen contributions from surface biopolymers. Photocatalytic performance was evaluated using methylene blue (MB) under natural sunlight irradiation. The ZnO nanoparticles achieved over 90% degradation within 90 minutes and followed pseudo-first-order kinetics with an apparent rate constant of 0.024 min⁻¹. The enhanced photocatalytic activity is attributed to efficient charge carrier generation, suppressed electron–hole recombination mediated by surface functional groups, and increased reactive oxygen species (ROS) formation. The results demonstrate that microwave-assisted starch–chitosan stabilization offers a sustainable and scalable strategy for producing high-performance ZnO photocatalysts suitable for environmental remediation applications.

15 January 2026 in International Journal of Pure and Applied Chemistry
Verified
Journal Article
Open access
PDF file
MARTIN Ouma OsembaMARTIN Ouma Osemba
MARTIN Ouma Osemba
SKSamuel Karenga
Samuel Karenga
GKGodffrey Keru
Godffrey Keru
The research was conducted to establish the effectiveness of silver nanoparticles embedded in indium tin oxide (ITO) thin film conducting material in causing the textile azo dye effluent degradation. The percentages of azo dye degradation were as follows: 68.4%, 72.5% and 93.1% using electrocoagulation, ITO and ITO-AgNPs coupled electrodes, respectively. The results obtained from the two-factor ANOVA with replication indicated a significant difference (p = 0.0024) when the silver nanoparticles embedded on indium tin oxide electrodes were utilised in the degradation of these azo dyes in the effluent samples. The colour removal was 99.97% showing that the optimised process was effective and efficient in the degradation of these azo dyes in the textile wastewaters.