We propose and perform broadband angular filtering with the combination of a volume Bragg grating and a surface grating pair. The condition for broadband operation is discussed. Near-field modulation, contrast ratio, and power spectral density are used to evaluate the filtering performances in the spatial and frequency domain. Experimental results show that the bandwidth of the output beam through the grating combination is remarkably increased, and the medium and high frequencies are effectively eliminated.
Optical orbital angular momentum (OAM) holography has been developed and implemented as a vital method for optical encryption. However, OAM holography can only be encoded and decoded with an OAM beam, which limits the level of optical encryption. Here, composite OAM beams are introduced using a computer-generated hologram (CGH) for holographic encryption. The target image is encoded with composite helical mode indices, and the OAM holographic image can only be reconstructed under a specific illuminating composite OAM beam. The experimental results are consistent with the theoretical design and numerical simulations, verifying that composite OAM beams can provide a higher security level for optical holographic encryption. The proposed method can be used to enhance anti-counterfeiting applications, secure communication systems, and imaging systems.
A method for beam diffraction sidelobe suppression based on the combination of volume Bragg gratings (VBGs) with different thicknesses or periods for angular filtering is proposed and performed. Simulated and experimental results show that the beam diffraction sidelobe is reduced from 12% to less than 1% with the non-sidelobe angular filter. The non-sidelobe angular filtering based on VBGs with thicknesses of 2.5 and 2.9 mm is simulated and demonstrated. The near-field distribution of filtered beams through the non-sidelobe angular filter is obviously smoother than that of the single VBG. The near-field modulation and contrast ratio (C) of filtered beams are found to be improved 1.17 and 1.66 times that of the single VBG. The far-field C of the filtered beam is improved to about 100∶1 and the power spectral density analysis shows that the cutoff frequency of the angular filter is greatly optimized with the VBG combination.
30 April 2019 in High Power Laser Science and Engineering
A band-stop angular filter (BSF) based on hump volume Bragg gratings (HVBGs) is proposed. Band-stop filtering in a two-stage amplifier laser system is discussed and simulated. Simulation results show that small-scale self-focusing effects in the laser system can be effectively suppressed with the BSF due to the control of fast nonlinear growth in a specific range of spatial frequencies in the laser beam. Near-field modulation of the output beam from the laser system was decreased from 2.69 to 1.37 by controlling the fast nonlinear growth of spatial frequencies ranging from with the BSF. In addition, the BSF can be used in a plug-and-play scheme and has potential applications in high-power laser systems.
The CLP Publishing collects CLP journals and partnered optics and photonics journals, and provides readers an optical publishing platform with global influence. SPIE, OSA, CUP. Chinese Laser Press (CLP), established by Shanghai Institute of Optics and Fine Mechanics (SIOM), Chinese Academy of Sciences (CAS) and Chinese Optical Society (COS) in 2009, nowadays publishes eight journals and manages three online platforms.
24 February 2026 in High Power Laser Science and Engineering
We propose a method for the cut-off of stimulated rotational Raman scattering (SRRS) in high-power lasers after long-distance propagation via a transmission volume Bragg grating (VBG). The VBG with both spectral and angular selectivity was designed, and its application as a near-field spatial filter for SRRS cut-off was analyzed. The results show that the spectral selectivity of the VBG enables effective separation of pump light and Stokes light in the near-field, and also improves the beam quality by filtering out high-frequency components of the pump light. This method can provide a novel and effective approach for suppressing nonlinear effects and controlling the beam quality of high-power lasers.