High-density polyethylene (HDPE) was co-fed into the catalytic pyrolysis (CP) of mandarin peel (MP) over different microporous catalysts, HY and HZSM-5, with different pore and acid properties. Although the non-catalytic decomposition temperature of MP was not changed during catalytic thermogravimetric analysis over both catalysts, that of HDPE was reduced from 465 °C to 379 °C over HY and to 393 °C over HZSM-5 because of their catalytic effects. When HDPE was co-pyrolyzed with MP over the catalysts, the catalytic decomposition temperatures of HDPE were increased to 402 °C over HY and 408 °C over HZSM-5. The pyrolyzer-gas chromatography/mass spectrometry results showed that the main pyrolyzates of MP and HDPE, which comprised a large amount of oxygenates and aliphatic hydrocarbons with a wide carbon range, were converted efficiently to aromatics using HY and HZSM-5. Although HY can provide easier diffusion of the reactants to the catalyst pore and a larger amount of acid sites than HZSM-5, the CP of MP, HDPE, and their mixture over HZSM-5 revealed higher efficiency on aromatics formation than those over HY due to the strong acidity and more appropriate shape selectivity of HZSM-5. The production of aromatics from the catalytic co-pyrolysis of MP and HDPE was larger than the theoretical amounts, suggesting the synergistic effect of HDPE co-feeding for the increased formation of aromatics during the CP of MP.
The catalytic fast copyrolysis (CFCP) of cork oak (CoOak) and waste plastic films (WPFs) over HBeta(25) (SiO2/Al2O3: 25) was investigated using a thermogravimetric (TG) analyzer and a tandem micro reactor-gas chromatography/mass spectrometry (TMR-GC/MS) to determine the effectiveness of WPFs as the hydrogen donating cofeeding feedstock on the CFCP of biomass. By applying CFCP, the maximum decomposition temperatures of CoOak (373.4 °C) and WPFs (487.9 °C) were reduced to 364.5 °C for CoOak and 436.5 °C for WPFs due to the effective interaction between the pyrolysis intermediates of CoOak and WPFs over HBeta(25), which has strong acidity and an appropriate pore size. The experimental yields of aromatic hydrocarbons on the CFCP of CoOak and WPFs were higher than their calculated yields concluded from the yields obtained from the individual catalytic fast pyrolysis (CFP) of CoOak and WPFs. The coke amount produced from the CFP of CoOak and WPFs over HBeta(25) were also decreased by applying CFCP.
We evaluated the effect of ammonium sulfate, a major component of airborne particulate matter, in the quantification of airborne micro- and nanoplastics (AMNPs) by analytical pyrolysis–gas chromatography-mass spectrometry (Py-GC/MS). Analytical pyrolysis has shown promising potential in providing mass-based information on AMNPs, which are compatible with established standard protocols to monitor airborne particulate matter. Py-GC/MS can be performed with little to no sample preparation, minimizing the risk of polymer loss or sample contamination. However, reactive components of particulate matter, such as inorganic salts, can interfere with the Py-GC/MS measurement of polymers, leading to over/underestimation of the polymer content and instrument contamination. In this study, we have shown that ammonium sulfate can generate matrix interference in the quantification of AMNPs in PM2.5. We have provided a solution to this issue based on water rinsing of the particulate matter directly inside the pyrolysis crucible, avoiding sample loss and preventing instrument contamination.
1 September 2014 in Rubber Chemistry and Technology
Determination of stearic acid in rubber is very important from the viewpoint of quality control of products. In place of the conventional liquid-phase extraction procedures for the analysis of additives in rubber, stearic and palmitic acids in vulcanized styrene–butadiene rubber (SBR) samples were directly analyzed in the solid state by thermal desorption (TD)–gas chromatography (GC)/mass spectrometry (MS) and thermally assisted hydrolysis and methylation (THM)–GC/MS. It was found that the precision of analytical data was only fair in the TD-GC/MS analysis, with 7.8% relative standard deviation (RSD), because of the interaction between the polar fatty acids and basic sites in the GC chromatographic system. On the other hand, THM-GC/MS, in which the fatty acids are derivatized to the methyl esters using tetramethylammonium hydroxide, can overcome this problem. Under the optimized measurement conditions of this study for THM-GC/MS, the average determined value (0.62 wt%) of total fatty acids in the SBR samples was found to agree well with the compounded amount (0.64 wt%) used in the preparation stage of the SBR samples, and the RSD was 3.2%.