Mohammad Mahbubur Kumer Rahman

Dr. Mohammad Mahbubur Kumer Rahman

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 August 2023 in Heliyon
Verified
Journal Article
Open access
SEShamima Akther Eti
Shamima Akther Eti
MIMuhammad Saiful Islam
Muhammad Saiful Islam
JSJahid Hasan Shourove
Jahid Hasan Shourove
BSBadhan Saha
Badhan Saha
SRSwapan Kumer Ray
Swapan Kumer Ray
MRMohammad Mahbubur Kumer Rahman
Mohammad Mahbubur Kumer Rahman
Plastic-based food-contact materials are potentially threatening the environment and public health by releasing toxic heavy metals. This study aimed to identify the types of plastic commonly used in Bangladesh as food-contact materials (FCMs) and assess the migration of heavy metals from these FCMs. Plastic types were identified using attenuated total reflectance fourier transform infrared spectroscopy (ATR-FTIR), and 25 samples were selected based on the category, including Polyethylene Terephthalate (PET), Polyethylene (PE), Polypropylene (PP), Polystyrene (PS), and Polycarbonate (PC). Distilled water, 3% acetic acid, and 15% ethanol were used as food simulants to assess the overall migration of chemicals at 70 °C for 2 h. The concentrations of heavy metals (Pb, Cd, Hg, Cr, and Sb) were analyzed using an Atomic Absorption Spectrophotometer (AAS). Results revealed that the highest overall migration occurred in coffee cups measuring 3.50 ± 0.17 mg/kg (using water simulant) and in yogurt containers with a measurement of 9.17 ± 0.1 mg/kg (using 3% acetic acid). The highest concentrations of Pb, Cd, Hg, Cr, and Sb were found in PP-2 (0.45 ± 0.01 mg/kg), PP-2 (0.36 ± 0.01 mg/kg), PC-5 (0.27 ± 0.01 mg/kg), PET-2 (0.12 ± 0.01 mg/kg), and PET-1 (0.09 ± 0.01 mg/kg), respectively. The concentration of heavy metals migrated from the containers is likely to induce a health risk due to bioaccumulation from long-term ingestion of food packaged in them. The findings of this study added knowledge about harmful heavy metals leached from the FCMs in Bangladesh.

7 January 2026 in RSC Advances
Verified
Journal Article
Open access
PDF file
RBRiyadh Hossen Bhuiyan
Riyadh Hossen Bhuiyan
MRMohammad Mahbubur Kumer Rahman
Mohammad Mahbubur Kumer Rahman
MBMd. Masum Billah
Md. Masum Billah
MEMd. Fardin Ehsan
Md. Fardin Ehsan
TATaslima Akter
Taslima Akter
Swapan K RaySwapan K Ray
Swapan K Ray
Aminated lignin (AmL) has significant potential as a superior bio-adsorbent due to its unique structure and properties. In this study, AmL was synthesized by a Mannich reaction from coconut fiber alkali lignin (CFAL). The structure of CFAL and AmL was confirmed with the help of FT-MIR, 1H-NMR spectroscopy, and CHNS elemental analysis. The crystallinity, morphology, and thermal properties were measured using XRD, SEM, and TGA, respectively. Finally, AmL was used to remove the anionic Congo red (CR) dye from an aqueous solution to investigate the performance of AmL compared to CFAL. The effect of pH, dose of adsorbent, and concentration of dye solution was investigated. 95.5% of the CR dye was removed within 80 minutes at pH 5 from a 20 ppm solution using 0.025 g of AmL. The dye removal efficiency of AmL samples was better than that of CFAL. This work demonstrates that AmL shows greater promise as a bio-adsorbent and can be further utilized as a green alternative in wastewater treatment. Thermodynamic analysis revealed that the adsorption process is spontaneous and exothermic, with negative Gibbs free energy (ΔG°) and enthalpy (ΔH°) values; AmL (ΔH° = −52.06 kJ mol−1) displayed a stronger adsorption affinity than CFAL. In addition, reusability studies demonstrated that AmL retained 83.4% of its adsorption efficiency after four adsorption–desorption cycles, highlighting strong operational stability compared with CFAL. To complement the experimental findings, density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations were carried out at the B3LYP/6-31G(d) basis set level. The results revealed that amination slightly reduces the HOMO–LUMO band gap (4.761 → 4.747 eV), enhances charge delocalization, and stabilizes excited states through partial n → π* transitions introduced by nitrogen functionalities. Electrostatic potential (ESP) mapping further demonstrated moderated charge localization and more uniform surface polarity in AmL, providing additional active sites for electrostatic interactions and hydrogen bonding with CR dyes. The theoretical insights are consistent with the experimental findings, indicating that electronic modification via amination enhances both adsorption affinity and charge-transfer efficiency.

15 July 2025 in RSC Advances
Verified
Journal Article
Open access
PDF file
MSMohammad Abul Hasan Shibly
Mohammad Abul Hasan Shibly
MHMohammad Mohsin Ul Hoque
Mohammad Mohsin Ul Hoque
PSProsenjit Sen
Prosenjit Sen
KOKhandaker Akil Mahadi Ohi
Khandaker Akil Mahadi Ohi
Md Maruf HossainMd Maruf Hossain
Md Maruf Hossain
MRMohammad Mahbubur Kumer Rahman
Mohammad Mahbubur Kumer Rahman
Natural plant fibers are inexpensive, lightweight, renewable, and environmentally friendly, making them sustainable substitutes for synthetic materials. This study aims to identify alternative, eco-friendly replacements for nonbiodegradable fibers used in polymer composites. To achieve this goal, the fibers from Ravenala madagascariensis leaf stalks were thoroughly characterized, with a focus on their physical, mechanical, thermal, and morphological properties. The hygroscopic properties (moisture content and regain), density, and chemical composition of the fibers were evaluated following ASTM D2654, ASTM D1909, ASTM D891-18, and TAPPI standards, respectively. Chemical composition analysis revealed that the fiber contained 54.25 wt% cellulose, 20.12 wt% hemicellulose, and 15.17 wt% lignin, contributing to its enhanced mechanical properties. The crystallinity, surface structure, chemical bonds, and thermal behavior of the fibers were analyzed via XRD, SEM, FTIR, and TGA techniques. This novel fiber has a moisture content and regain percentages of 9.17% and 10.1%, respectively. Its average tensile strength is 151 MPa for a 20 mm gauge length (GL) and 136.8 MPa for a 30 mm gauge length (GL), with a crystallinity index of 67.37%, in which the size of the crystals is 15.64 nm. The fiber degradation begins at a maximum temperature of 550 °C. This original fiber holds potential for applications in the production of cellulose nanoparticles, fiber-reinforced composites, biomaterials and so on.

8 March 2024 in Heliyon
Verified
Journal Article
Open access
MHMohammad Amirul Hoque
Mohammad Amirul Hoque
ARA.F.M. Mustafizur Rahman
A.F.M. Mustafizur Rahman
MRMohammad Mahbubur Kumer Rahman
Mohammad Mahbubur Kumer Rahman
Mohammad Nazrul Islam BhuiyanMohammad Nazrul Islam Bhuiyan
Mohammad Nazrul Islam Bhuiyan
SJShirin Akter Jahan
Shirin Akter Jahan
NNNurnabi Nurnabi
Nurnabi Nurnabi
Graphene has recently drawn exponential attention due to its surprising physicochemical properties and diversified field of applications. Although graphene oxides (GOs), itself is an exclusive material, it is also an intermediate product for the production of reduced graphene oxides (rGOs), graphene and their derivatives, which are other more superficial materials. In this study, GOs with higher oxygen to carbon ratios were synthesized following the Tour method, where the excess feed acid liquor (FAL) of mixed concentrated sulfuric and orthophosphoric acids at a ratio of 90:10 was recovered from the reaction slurries by applying the centrifugation technique. About 80–90 % of the FAL was recycled and reused as feed for the subsequent batches. The changes in the properties of FAL for the five consecutive recycling and reuse were studied. The properties of recycled FALs were investigated by measuring density, moisture content, pH, and ion concentration. The consecutive recycling of FALs tends to increase the moisture content about 0.5% in each recycles. Ion-chromatography (IC) was used to measure the variation in SO42− and PO43− ions in the FALs. The H2SO4 reacts with KMnO4 and crystalized out from the recovered FAL faster than the phosphoric acid. So, sulfuric acid content in the makeover FALs must be greater than primary FAL. The product GOs were characterized using FT-IR, FT-Raman, UVVis, STA, SEM, XPS, Zeta-potential, and particle size analyzers. The variation of the properties of GOs with the changes in the reaction parameters such as temperature and time were investigated and correlated with the product yield. It was observed that the effect of temperature on the reaction rate was found to be negatively and positive with the reaction time. The oxygen-to-carbon atomic ratio from XPS analysis was found 66.7%, which supported the increase in product yields 66.9% in the experimental results. The effect of acid concentration, reaction temperature, and time on the GOs properties were satisfactory, correlated, and easily controllable with the reaction conditions. A higher extent of oxidation and enhanced product yields 65–70% were observed at 60–70 °C and 14–18 h. A mixture of nano- and macro-molecular GOs was obtained, and their compositions were easily controllable and separable by controlling the reaction conditions. A correlation was made among the properties of synthesized GOs, FAL, and recycled FAL and reaction conditions.

31 December 2024 in ChemistrySelect
Verified
Journal Article
Closed access
EPElius Hosen Pk.
Elius Hosen Pk.
Md. Monarul IslamMd. Monarul Islam
Md. Monarul Islam
RARabeya Akter
Rabeya Akter
FNFajilatun Nesa
Fajilatun Nesa
MRMohammad Mahbubur Kumer Rahman
Mohammad Mahbubur Kumer Rahman
HAHamad Albrithen
Hamad Albrithen

Verified
Journal Article
Open access
PDF file
MHMd. Shakhawoat Hossain
Md. Shakhawoat Hossain
MUMohammad Shahid Ullah
Mohammad Shahid Ullah
NKNurul Anwar Khan
Nurul Anwar Khan
MSMd. Sajib
Md. Sajib
SJShirin Akter Jahan
Shirin Akter Jahan
MRMohammad Mahbubur Kumer Rahman
Mohammad Mahbubur Kumer Rahman
In this study, a cellulose nanocrystal (CNC)-supported Ag–ZnO nanocomposite was synthesized via a hydrothermal route as a polymeric photocatalyst for efficient UV-A light-driven dye degradation. The renewable CNC framework provides abundant hydroxyl functional groups for nanoparticle anchoring, enhancing dispersion and interfacial charge transfer. Structural (XRD, FTIR, TEM, PL, and XPS) and thermal (TGA and DTG) analyses confirm successful incorporation of Ag nanoparticles and retention of CNC crystallinity. The composite exhibits a reduced optical bandgap (3.02 eV) and demonstrates superior photocatalytic activity, achieving 96% methylene blue (MB) degradation within 120 min. Enhanced performance is attributed to the synergistic effect of Ag-induced plasmonic excitation and CNC-facilitated charge migration, effectively suppressing ZnO photocorrosion. Moreover, the optimization of the parameters was conducted and found to be pH 7, a catalyst dose of 0.3 g L−1, and an initial MB concentration of 10 ppm, which shows the best photocatalytic degradation reaction. The CNC/Ag–ZnO catalyst maintains 87% activity after five reuse cycles, showing good stability and reusability. The photostability of the CNC/Ag–ZnO catalyst was evaluated by ICP-MS, which measured Zn2+ concentration in the aqueous solution. Additionally, the degraded MB compounds were identified using GC-MS/MS analysis. This work highlights the potential of polymer-based biogenic supports for sustainable photocatalyst design and bridges polymer science with environmental remediation technology.