The Nayongzhi Zn-Pb deposit, located in the southeastern margin of the Sichuan-Yunnan-Guizhou (S-Y-G) Zn-Pb metallogenic province, China, has been recently discovered in this region and has an estimated resource of 1.52 Mt of metal at average grades of 4.82 wt % Zn and 0.57 wt % Pb. The ore bodies are hosted in the Lower Cambrian Qingxudong Formation dolostone and occur as stratiform, stratoid and steeply dipping veins. The predominant minerals are sphalerite, galena, dolomite, calcite with minor pyrite, and barite. In this paper, the inductively coupled plasma mass spectrometry (ICP-MS) technique has been used to investigate the concentrations of Fe, Cd, Ge, Ga, Cu, Pb, Ag, In, Sn, Sb, Co and Mn in bulk grain sphalerite from the Nayongzhi deposit, in an effort to provide significant insights into the element substitution mechanisms, ore-forming temperature and genesis of the deposit. This study shows that those trace elements (i.e., Cd, In, Sn, Sb, Fe, Mn, Cu, Ga, Ge, Ag, and Co) are present in the form of isomorphism in sphalerite, and strong binary correlation among some elements suggests direct substitution as Zn²⁺↔Fe²⁺ and coupled substitutions as Zn²⁺↔Ga³⁺ + (Cu, Ag)⁺ and Zn²⁺↔In³⁺ + Sn³⁺ + □ (vacancy), despite there being no clear evidence for the presence of Sn³⁺. Sphalerite from the Nayongzhi deposit is enriched in Cd, Ge and Ga and depleted in Fe, Mn, In and Co, which is similar to that of the Mississippi Valley-type (MVT) deposit and significantly different from that of the Volcanogenic Massive Sulfide (VMS) deposit, Sedimentary-exhalative (Sedex) deposit, skarn, and epithermal hydrothermal deposit. Moreover, the ore-forming temperature is relatively low, ranging from 100.5 to 164.4 °C, as calculated by the GGIMFis geothermometer. Geological characteristics, mineralogy and trace element contents of sphalerite suggest that the Nayongzhi deposit is a MVT deposit. In addition, according to the geological characteristics, Ag content in sphalerite, and Pb isotope evidence, the Nayongzhi deposit is distinct from the deposits associated with the Indosinian Orogeny in S-Y-G Zn-Pb metallogenic province (e.g., Huize, Daliangzi, Tianbaoshan and Tianqiao deposits), thus, suggesting that multi-stage Zn-Pb mineralization may have occurred in this region.

The Dulong Sn-Zn-In polymetallic deposit in the Yunnan province, SW China, hosts a reserve of 5.0 Mt Zn, 0.4 Mt Sn, and 7 Kt In. It is one of the most important polymetallic tin ore districts in China. Granites at Dulong mining area include mainly the Laojunshan granite (third phase), which occurs as quartz porphyry or granite porphyry dikes in the Southern edge of the Laojunshan intrusive complex. Granites of phases one and two are intersected at drill holes at depth. There are three types of cassiterite mineralization developed in the deposit: cassiterite-magnetite ± sulfide ore (Cst I), cassiterite-sulfide ore (Cst II) within the proximal skarn in contact with the concealed granite (granites of phases one to two and three), and cassiterite-quartz vein ore (Cst III) near porphyritic granite. Field geology and petrographic studies indicate that acid neutralising muscovitization and pyroxene reactions were part of mechanisms for Sn precipitation resulting from fluid-rock interaction. In situ U–Pb dating of cassiterite samples from the ore stages of cassiterite-sulfide (Cst II) and Cassiterite-quartz vein (Cst III) yielded Tera-Wasserburg U–Pb lower intercept ages of 88.5 ± 2.1 Ma and 82.1 ± 6.3 Ma, respectively. The two mineralization ages are consistent with the emplacement age of the Laojunshan granite (75.9–92.9 Ma) within error, suggesting a close temporal link between Sn-Zn(-In) mineralization and granitic magmatism. LA-ICPMS trace element study of cassiterite indicates that tetravalent elements (such as Zr, Hf, Ti, U, W) are incorporated in cassiterite by direct substitution, and the trivalent element (Fe) is replaced by coupled substitution. CL image shows that the fluorescence signal of Cst I–II is greater than that of Cst III, which is caused by differences in contents of activating luminescence elements (Al, Ti, W, etc.) and quenching luminescence element (Fe). Elevated W and Fe but lowered Zr, Hf, Nb, and Ta concentrations of the three type cassiterites from the Dulong Sn-Zn-In polymetallic deposit are distinctly different from those of cassiterites in VMS/SEDEX tin deposits, but similar to those from granite-related tin deposits. From cassiterite-magnetite ± sulfide (Cst I), cassiterite-sulfide ore (Cst II), to cassiterite-quartz vein ore-stage (Cst III), high field strength elements (HFSEs: Zr, Nb, Ta, Hf) decrease. This fact combined with cassiterite crystallization ages, indicates that Cst I–II mainly related to concealed granite (Laojunshan granites of phases one and two) while Cst III is mainly related to porphyritic granite (Laojunshan granites of phase three).

The Laochang Ag-Pb-Zn-Cu deposit, located in the southern margin of the Sanjiang Tethys Metallogenic Belt (STMB), is the typical Ag-Pb-Zn-Cu deposit in this region. Its orebodies are hosted in the Carboniferous Yiliu Formation volcanic-sedimentary cycle and occur as stratiform, stratoid and lenticular. Whether or not the stratabound ore belong to the volcanogenic massive sulfide (VMS) deposit remains unclear and controversial. In this paper, the whole rock geochemistry, trace elements in sphalerite, U-Pb zircon chronology and Pb isotopes were investigated, aiming to provide significant insights into the genesis and geodynamic setting of the Laochang deposit. Lead isotope ratios of pyrite and sphalerite from the stratabound ore are 18.341 to 18.915 for ²⁰⁶Pb/²⁰⁴Pb; 15.376 to 15.770 for ²⁰⁷Pb/²⁰⁴Pb; and 38.159 to 39.200 for ²⁰⁸Pb/²⁰⁴Pb—which display a steep linear trend on Pb-Pb diagrams. This indicates a binary mixing of lead components derived from leaching between the host volcanic rock and mantle reservoir. Sphalerite from stratabound ores is relatively enriched in Fe, Mn, In, Sn, and Ga—similar to typical VMS deposits. Moreover, the Carboniferous volcanic rock hosting the stratabound Ag-Pb-Zn-Cu ores has a zircon U-Pb age of 312 ± 4 Ma; together with previous geochronological and geological evidences, thus, we consider that the stratabound mineralization occur in the Late Paleozoic (~323–308 Ma). Collectively, these geologic, geochemical, and isotopic data confirm that the stratabound ores should be assigned to Carboniferous VMS mineralization. In addition, volcanic rocks hosting the stratabound ore exhibit elevated high field strength elements (HFSEs, Nb, Ta, Zr and Hf) abundance, slight enrichment of light rare earth element (LREE), and depletion of Ba and Sr with obvious Nb-Ta anomalies. Such characteristics suggest that their magma is similar to typical oceanic island basalt. In addition, the oceanic island basalt (OIB)-like volcanic rocks were formed at Late Paleozoic, which could be approximately synchronous with the VMS mineralization at Laochang. Thus, it is suggested that the Laochang VMS mineralization was generated in the oceanic island setting prior to the initial subduction of the Changning-Menglian Paleo-Tethys Ocean.

The Yiliu tungsten polymetallic deposit, located in the south central portion of the Nanling nonferrous metal metallogenic province in South China, is an area with common Yanshanian tectonothermal events. Early Yanshanian magmatism leads to the emplacement of voluminous tungsten-bearing granite intrusions, such as the Baoshan, Benggangling and Junye plutons, which are considered temporally and spatially associated with W-polymetallic mineralization in the Yiliu region. Here, we investigate the basic geological and petrological characteristics of the Junye granites, and present major and trace element geochemical data and bulk-rock Sr-Nd-Pb-Hf isotopic data to gain insight into the petrogenesis and tectonic setting of granitic intrusions in the region. The Junye granites are high-K calc-alkaline and metaluminous to weakly peraluminous [A/CNK = molar ratios of Al₂O₃/(CaO + Na₂O + K₂O) = 0.97–1.02] with enrichment in SiO₂ (75.68–76.44 wt.%), relatively high total alkalis (K₂O + Na₂O = 8.06–8.45 wt.%) with K₂O/Na₂O ratios ranging from 1.12 to 1.42, and moderate Al₂O₃ (12.62–13.00 wt.%), but low in P₂O₅ (<0.01 wt.%), MgO (0.02–0.04 wt.%), CaO (0.78–0.95 wt.%) and Fe₂O₃^T (0.93–1.07 wt.%). They show spectacular tetrad effect REE (rare earth element) patterns with low ΣREE content (53.2–145.3 ppm), negative Eu anomalies (δEu = 0.09–0.17) and slight enrichment of LREEs (light rare earth elements) relative to HREEs (heavy rare earth elements). The granites are enriched in Rb (481–860 ppm), Th (16.2–46.1 ppm) and U (25.4–40.8 ppm) but depleted in Ba (1.0–5.8 ppm), Sr (11.1–23.4 ppm), P (9.5–26.7 ppm) and Ti (241–393 ppm). All geochemical features lead us to interpret the Junye granites as highly fractionated I-type granites. These granites underwent intense interaction between highly evolved magma and volatile-rich hydrothermal fluids during the late stage of formation, and accompanied fractional crystallization of biotite, plagioclase and accessory minerals, such as apatite, monazite and allanite. Additionally, the granites show uniform Nd isotopic ratios with calculated εNd (152 Ma) values of −8.28 to −8.91 and Nd model age (T_DM2) of 1645 to 1698 Ma, stable age-corrected initial Pb isotopic compositions with (²⁰⁶Pb/²⁰⁴Pb)_i of 18.646–19.010, (²⁰⁷Pb/²⁰⁴Pb)_i of 15.767–15.786 and (²⁰⁸Pb/²⁰⁴Pb)_i of 39.113–39.159, respectively, and homogeneous Hf isotopic values yielding εHf (152 Ma) values from −6.9 to −9.5 with T_DM2 ages of 1680 to 2214 Ma, collectively suggesting that the granitic magma was probably derived from the remelting of ancient infracrustal materials in the basement of the Nanling region. Consequently, we consider that the Junye granites are the products of partial melting of Paleoproterozoic infracrustal medium- to high-K metamorphic basaltic rocks in the Cathaysia Block, which was caused by the underplating of coeval mantle basaltic magmas that provided abundant heat energy for melting in a tectonic setting, with lithospheric extension and thinning during the late Jurassic period.

Buckwheat huller is the key equipment of the buckwheat rice processing and its performance is directly related to the quality and yield of buckwheat rice. The key working parts of the sand disc sheller are a pair of parallel sand discs. The structure and the working parameters of the sand discs are the key factors affecting the shelling performance. In this paper, the effect of rotating speed of sand disc, shelling clearance, grain size of sand disc and width of the working face on the shelling performance are experimentally investigated. The results show that the rice yield and relative broken rice rate increase with the increase of the rotating speed of the lower sand disc, and the relative broken rice rate increases sharply when the speed reaches a certain value. With the linear increase of the shelling clearance, the rice yield and the relative broken rice rate are first decreased rapidly, and then decrease slowly. The smaller the particle size of the sand disc is, the higher the rice yield and the relative broken rice rate are, and the influence of the lower sand disc is obviously greater than that of the upper one. Properly widening the width of working face will increase the rice yield but the width tends to have little influence on the rice yield when it increases to a certain extent, and its change has a small impact on the relative broken rice rate. According to the results of single factor test and orthogonal test, the sheller can achieve a better shelling performance and work efficiency when the grain size of the upper sand disc is F24, the grain size of the lower sand disc is F36, the shelling clearance is 5 mm, the rotating speed of the sand disc is 950 r/min, and the width of the working face is 2 cm.