Regional curtain grouting for water interception serves as a critical technique for achieving safe and efficient mining under complex hydrogeological conditions in deep mine deposits. This study focuses on the Cuihongshan Iron-Polymetallic Mine, where repeated incidents of water inrush and sand outbursts have occurred due to complex hydrogeological conditions. By identifying the water-conducting pathways and characterizing the spatial distribution of relative aquitards within the mining area, a precise hydrogeological model was established. On this basis, the engineering application and performance evaluation of horizontal curtain grouting were systematically investigated. Through field monitoring and multi-method joint analysis, the water-blocking effectiveness of the grouting technique was comprehensively assessed. The results demonstrate a significant sequential reduction in grout take per meter for primary, secondary, and tertiary grouting holes, indicating a clear cumulative grouting effect. The grout effectively filled karst fractures, forming a continuous and stable water-resisting curtain. The project successfully severed the hydraulic connection between the highly water-rich Quaternary aquifer and the mine workings, substantially reducing mine water inflow. This study provides important theoretical support and practical reference for water hazard control in similar deep metal mines.
Mine water disaster is one of the main natural disasters in underground mining operations, and seriously threatens the safety of mine production and personnel’s life, affecting mine safety and sustainable development. The research on the prevention and control of the disaster of water inrush in fractured rock mass has become a major international frontier issue in the field of underground engineering, and it is also a major national demand. The key to effectively preventing and controlling disasters is to reveal the mechanisms of disasters. Taking the Huize lead–zinc mine as an example, this paper deeply studies the application method of the transient electromagnetic method (TEM) in advance water detection in shaft and roadway development and field test results. In view of the complicated hydrogeological conditions of the mine and the serious threat of water damage, this paper puts forward a kind of advanced water detection technology for the Huize lead–zinc mine based on the mine transient electromagnetic method. The technology uses the principle of electromagnetic induction to detect the water-bearing structure ahead by placing the transmitting and receiving coils in the shaft. In the field test, the multi-turn small wire frame device is used to detect the direction of the roof, bedding and floor of the roadway head on. In roadway excavation, if the site meets the detection requirements, the abnormal low-resistance area in the test area can be exposed by drilling first. The degree of structural development and the peak value of water gushing in the target area have been mastered. Then, it is determined whether it is necessary to increase borehole exploration in other relatively high-resistance low-risk areas. The experimental results show that the mine transient electromagnetic method can accurately identify the low-resistance water in front, and provide reliable technical support for mine water disaster prevention. The research in this paper not only enriches the application field of the mine transient electromagnetic method, but also provides a useful reference for mine water damage prevention under similar conditions.
Deep metal mines face increasing risks of water and sand inrush under complex fracture network conditions, where the unclear mechanism of slurry diffusion limits the reliability of horizontal curtain grouting. Taking the Cuihongshan iron–polymetallic mine as a case study, this paper establishes a stochastic three-dimensional discrete fracture network model and adopts an orthogonal experimental design to systematically investigate the effects of key engineering parameters on grout diffusion behavior. The results reveal that grouting pressure acts as the dominant controlling factor, significantly expanding the diffusion range and promoting the formation of continuous high-fill zones within the fracture network. Conversely, slurry viscosity exhibits a negative correlation with diffusion performance, leading to reduced inter-borehole connectivity as viscosity increases. Compared with conventional macro-indicators, the inter-borehole overlap rate provides a more precise quantitative measure of curtain continuity. The study demonstrates that achieving a sufficiently high overlap rate is critical for transitioning from discontinuous filling to a reliable impermeable curtain. These findings offer a theoretical basis for optimizing grouting parameters and evaluating sealing effectiveness in deep mine construction.