Eucalyptus-based glued laminated timber (glulam) was produced to determine the feasibility of a non-destructive method (drilling resistance) to predict the properties of structural elements and add value to lower-quality hardwood species. Glulam was manufactured with formaldehyde (Resorcinol), reference condition, and bio-based (Castor oil-based) adhesives in two assembly schemes, the core composed either of two continuous lamellae each 105 cm long, or of two formed by the juxtaposition of shorter boards (35 and 55 cm). The shear strength of the glue line (fv0), modulus of elasticity (Ec90), and strength (fc90) in compression perpendicular to the grain; delamination (DL); and main and extended glue line thicknesses were evaluated. The Resistograph equipment was used to perform the perforation perpendicular to the glue line (samples extracted from the glulam elements) to correlate the properties. The results of this research demonstrate that the scheme of the boards had little effect on the physical and mechanical properties evaluated (except the main glue line and delamination), and the drilling resistance (DR) presents a significant correlation with practically all properties evaluated (variations in density values and other properties are explained by variations in DR values), making it possible to estimate Ec90 and fc90 with desired precision (R2adj ≈ 80%). This highlights the feasibility of using this methodology in the quality control of glulam elements. It is concluded that regardless of the adhesive, elements comprising a 105 cm-length core and external lamellae (T1 and control) are indicated for external use, presenting low delamination. Short-length central lamellae adhesively glued with PUR (T2) are not recommended for external applications due to their susceptibility to delamination. However, T2 is indicated for internal environments due to its low production cost. This study also proved the efficiency of using models based on drilling resistance to estimate wood density and its resistance to compression perpendicular to the fiber.
12 August 2022 in Research, Society and Development
Pinus forests are the second most planted in Brazil and the wood obtained from them is mainly used as structural elements in the civil construction sector. The Brazilian standard that deals with calculations of wooden structures projects recommends the use of wood in the range of 10% to 20% of moisture content. Thus, this study aimed to present an investigation about the influence of moisture content on the static modulus of elasticity (MOEst) of wooden beams by transverse vibration tests. The MOEst was evaluated by static bending tests and transverse vibration tests for various moisture content. The transverse vibration test was performed in a free condition using an accelerometer and an impulse hammer, and the dynamic modulus of elasticity (MOEd) was determined from the frequency of the first bending vibration mode. A total of 20 wooden beams were obtained from freshly cut Pinus spp. logs with initial high moisture content were used, with nominal dimensions of 5 cm × 10 cm × 200 cm (thickness × width × length). It was observed that the MOEd is also affected by moisture content according to the non-linear regression model. There were significant changes in the dynamic modulus of elasticity (MOEd) for the moisture contents (M) below 25% (near the fiber saturation point - FSP).
9 May 2024 in Journal of the Indian Academy of Wood Science
Os ensaios não destrutivos que utilizam o princípio de propagação de ondas têm potencial para predizer as propriedades mecânicas da madeira ainda em campo, se conhecida as variáveis deste processo. Este trabalho teve o objetivo de estimar o módulo de elasticidade à flexão estática da madeira de Eucalyptus sp., por meio de duas técnicas não destrutivas: ultrassom e stress wave. Para tal foram usados 60 corpos de provas com dimensões nominais de 2,5 x 2,5 x 57,5 cm (tangencial x radial x longitudinal), estando na umidade de equilíbrio. Os testes não destrutivos foram realizados por meio de um equipamento de ultrassom e um de ondas de tensão, enquanto que os testes destrutivos de flexão estática foram realizados em uma máquina universal de ensaios. Os resultados experimentais mostraram que os módulos de elasticidade obtidos pelas técnicas não destrutivas foram superiores à obtida pela técnica destrutiva. Os modelos matemáticos ajustados apresentaram erro padrão da estimativa (Syx) de 11,39 e 10,78%. Logo, houve correlação média positiva entre o módulo estático e dinâmico. As técnicas de ondas de tensão e ultrassom podem ser empregadas com o intuito de estimar o módulo de elasticidade da madeira de Eucalyptus sp.
4 January 2024 in International Journal of Adhesion and Adhesives
O conhecimento sobre as propriedades tecnológicas da madeira permite o melhor aproveitamento do material. O objetivo desse estudo foi realizar a caracterização física, química e mecânica da madeira de eucalipto do clone Eucalyptus urophylla x Eucalyptus grandis para a aplicação em elementos colados. Para isso, utilizaram-se peças serradas que, inicialmente, foram classificadas visualmente. A caracterização física da madeira foi realizada com a retirada de corpos de prova de 72 tábuas de dimensões médias de 2,9 × 9,3 × 310,7 cm3 (espessura × largura × comprimento), de forma a determinar o teor de umidade, a densidade básica, a densidade aparente e a estabilidade dimensional. Os teores de extrativos e de cinzas foram obtidos a partir da serragem do material. A caracterização mecânica foi feita por meio de técnicas não destrutivas, com os ensaios de flexão estática, stress wave, vibração transversal e vibração longitudinal. O valor médio para densidade básica foi de 0,510 g cm-3 e para densidade aparente igual a 0,630 g cm-3. O teor de extrativos obtido foi de 6,06% e o teor de cinzas igual a 0,44%, composição química considerada favorável para a colagem. De acordo com os valores médios para retração volumétrica (17,50%) e fator de anisotropia (1,55), a madeira pode ser aplicada para elementos colados. Os resultados obtidos nos ensaios mecânicos indicam que a madeira de Eucalyptus urophylla x Eucalyptus grandis apresenta módulo de elasticidade estático igual a 16,45 GPa. Conclui-se que a aplicação dessa espécie para elementos colados é indicada e que os ensaios não destrutivos são eficazes para caracterização da madeira.