With the advancement of the autonomous vehicle development, the different possibilities of improving fuel economy have increased significantly by changing the driver or powertrain response under different traffic conditions. Development of new fuel-efficient driving strategies requires extensive experiments and simulations in traffic. In this paper, a fuel efficiency simulator environment with existing simulator software such as Simulink, Vissim, Sumo, and CarSim is developed in order to reduce the overall effort required for developing new fuel-efficient algorithms. The simulation environment is created by combining a mid-sized sedan MATLAB-Simulink powertrain model with a realistic microscopic traffic simulation program. To simulate the traffic realistically, real roads from urban and highway sections are modeled in the simulator with different traffic densities. Other traffic elements which would affect the fuel consumption, such as speed limit information, traffic stop sign and a traffic lights with SPaT (Signal Phase and Timing) information, are a part of the simulator. In order to evaluate the performance of the developed algorithms, fuel consumption performance of the developed algorithms are compared with the fuel consumption performance of a simple driver model, the Intelligent Driver Model (IDM). Therefore, the IDM with different aggressiveness levels is integrated into the simulation environment. Finally, the developed simulation environment is integrated into CarSim for perception sensor simulation capabilities. This developed simulation environment aims to accelerate development of fuel-efficient algorithms.
31 July 2024 in IEEE Transactions on Transportation Electrification
In this paper, we propose an advanced automated braking algorithm, named personalized one-pedal driving (POPD), for electrified vehicles capable of learning a driver’s braking behaviors from collected data through model predictive control (MPC). One-pedal driving (OPD) is becoming one of the necessary features for electric vehicles, as it increases the amount of energy regeneration over a trip and reduces the driver’s effort on the brake pedal. To mimic a driver’s braking behavior in the MPC’s control design, we consider both headway and perceptual constraints. We have analyzed real-world on-road data from 450 drivers to investigate the constraints’ dependence on a driver. In addition, we introduce a learning framework into the POPD in which the weights of the MPC cost function are optimized using particle swarm optimization. Moreover, to investigate the impact of prediction accuracy on POPD performance, we have conducted a comparative case study on prediction methods and horizon lengths using real-world driving data. Both open-loop and closed-loop (human-in-the-loop) simulation results demonstrate the efficacy of the proposed POPD method as compared with a benchmark control method, the desired relative distance-based personalized braking (DRD-PB) algorithm. Specifically, the human-in-the-loop results from two drivers show that brake pedal use can be reduced on a specific route by approximately 80%.
Trailer parking is a challenging task due to the unstable nature of the vehicle-trailer system in reverse motion and the unintuitive steering actions required at the vehicle to accomplish the parking maneuver. This paper presents a strategy to tackle this kind of maneuver with an advisory graphic aid to help the human driver with the task of manually backing up the vehicle-trailer system. A kinematic vehicle-trailer model is derived to describe the low-speed motion of the vehicle-trailer system, and its inverse kinematics is established by generating an equivalent virtual trailer axle steering command. The advisory system graphics is generated based on the inverse kinematics and displays the expected trailer orientation given the current vehicle steer angle and configuration (hitch angle). Simulation study and animation are set up to test the efficacy of the approach, where the user can select both vehicle speed and vehicle steering angle freely, which allows the user to stop the vehicle-trailer system and experiment with different steering inputs to see their effect on the predicted trailer motion before proceeding with the best one according to the advisory graphics, hence creating a series of piecewise continuous control actions similar to how manual trailer reverse parking is usually carried out. The advisory graphics proves to provide the driver with an intuitive understanding of the trailer motion at any given configuration (hitch angle).
14 April 2020 in SAE International Journal of Advances and Current Practices in Mobility
With the advancement of simulation software development, the efficiency of vehicle and powertrain controls research and development can be significantly improved. Traditionally, during the development of a new control algorithm, dyno or on-road testing is necessary to validate the algorithm. Physical testing is not only costly, but also time consuming. In this study, a virtual platform is developed to reduce the effort of testing. To improve the simulation accuracy, co-simulation of multiple software is suggested as each software specializes in certain area. The Platform includes Matlab Simulink, PTV Vissim, Tass Prescan and AVL Cruise. PTV Vissim is used to provide traffic environment to PreScan. PreScan is used for ego vehicle simulation and visualization. Traffic, signal and road network are synchronized in Vissim and PreScan. Powertrain system is simulated in Cruise. MATALB/Simulink serves as master of this co-simulation, and integrates the different software together. It also includes human driver model and a powertrain control function. An ADAS/V2X-ISG (Idle Stop and Go) powertrain control algorithm is implemented in Simulink and tested by using the platform under different real-world driving conditions. The study demonstrated that the virtual platform can be used for vehicle powertrain control algorithm simulation. Different powertrain control algorithms can be tested, validated and optimized under different traffic environment by utilizing the platform.