SEMIH OLCMEN

Dr. SEMIH OLCMEN

orcid

Research Focus & Metrics

Academic Career Length

39Years (1988-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 May 1995 in Journal of Fluid Mechanics
Verified
Journal Article
Closed access
PDF file
SEMIH OLCMENSEMIH OLCMEN
SEMIH OLCMEN
RSRoger L. Simpson
Roger L. Simpson
A three-dimensional, pressure-driven turbulent boundary layer created by an idealized wing–body junction flow was studied experimentally. The data presented include time-mean static pressure and directly measured skin-friction magnitude on the wall. The mean velocity and all Reynolds stresses from a three-velocity-component fibre-optic laser-Doppler anemometer are presented at several stations along a line determined by the mean velocity vector component parallel to the wall in the layer where the $\overline{u^2}$ kinematic normal stress is maximum (normal-stress coordinate system). This line was selected by intuitively reasoning that overlap of the near-wall flow and outer-region flow occurs at the location where $\overline{u^2}$ is maximum. Along this line the flow is subjected to a strong crossflow pressure gradient, which changes sign for the downstream stations. The shear-stress vector direction in the flow lags behind the flow gradient vector direction. The flow studied here differs from many other experimentally examined three-dimensional flows in that the mean flow variables depend on three spatial axes rather than two axes, such as flows in which the three-dimensionality of the flow has been generated either by a rotating cylinder or by a pressure gradient in one direction only throughout the flow.The data show that the eddy viscosity of the flow is not isotropic. These and other selected data sets show that the ratio of spanwise to streamwise eddy viscosities in the wall-shear-stress coordinate system is less scattered and more constant (about 0.6) than in the local free-stream coordinate system or the normal stress coordinate system. For y+ > 50 and y/δ < 0.8, the ratio of the magnitude of the kinematic shear stress |τ/ρ| to the kinematic normal stress $\overline{v^2}$ is approximately a constant for three-dimensional flow stations of both shear-driven and pressure-driven three-dimensional flows. In the same region, the ratio of the kinematic shear stresses $-\overline{vw}/-\overline{uw}$ appears to be a function of y+ in wall-stress coordinates for three-dimensional pressure-driven flows.

1 January 1994 in AIAA Journal
Verified
Journal Article
Closed access
SEMIH OLCMENSEMIH OLCMEN
SEMIH OLCMEN
RSRoger L. Simpson
Roger L. Simpson

31 January 2005 in The Journal of the Acoustical Society of America
Verified
Journal Article
Closed access
SMSally Anne McInerny
Sally Anne McInerny
SEMIH OLCMENSEMIH OLCMEN
SEMIH OLCMEN
Analyses of rocket noise data measured at far-field locations during the launch of a large rocket and a smaller rocket are presented. Weak shocks are present in all of the data sets. In order to characterize these shocks, those segments of the waveforms where the acoustic pressure is increasing are isolated and the rate of increase in pressure plotted versus magnitude of pressure rise. The plots follow a trend consistent with random noise at low values of pressure rise, then transition to the pressure-squared dependence expected for weak shocks at higher pressure rise values. Power spectral densities of the noise during the period of maximum overall sound-pressure levels display high- and low-frequency spectral slopes that are close to those predicted for shock-dominated noise. It is concluded that shocks must be included in propagation models if high frequency levels are to be estimated as a function of distance from the source. Initial shock thicknesses will have to be characterized experimentally and will require instrumentation with a bandwidth well in excess of 20 kHz. Reflection-free data are essential if meaningful assessments of the statistical properties of the noise are to be made.

1 June 1995 in Measurement Science and Technology
Verified
Journal Article
Closed access
PDF file
SEMIH OLCMENSEMIH OLCMEN
SEMIH OLCMEN
RSR L Simpson
R L Simpson

1 December 2006 in International Journal of Heat and Fluid Flow
Verified
Journal Article
Closed access
SEMIH OLCMENSEMIH OLCMEN
SEMIH OLCMEN
RSRoger L. Simpson
Roger L. Simpson

15 August 2007 in Applied Intelligence
Verified
Journal Article
Closed access
PDF file
CNCameron R. Nott
Cameron R. Nott
SEMIH OLCMENSEMIH OLCMEN
SEMIH OLCMEN
DLDaniel R. Lewis
Daniel R. Lewis
KWKeith Williams
Keith Williams