A 2-D unconditionally stable radial point interpolation meshless method (RPIM) based on the Crank-Nicolson (CN) scheme is presented. The CN algorithm in the proposed method is applied to only one of the Maxwell equations. It leads to solving the second-order vector wave equation in the time domain. Therefore, only one electromagnetic field is implicitly updated at each iteration. Furthermore, the computational cost of the CN-RPIM scheme is lesser than the conventional RPIM. The Courant-Friedrichs-Lewy condition in the proposed vector wave equation method does not constrain the time step due to its implicit formulation. Moreover, the stability condition of the proposed method is investigated in this paper through its amplification matrix. A 2-D waveguide and a filter are used as examples to validate and to demonstrate the effectiveness and the accuracy of the proposed method. Numerical results are compared with those obtained by the explicit RPIM method and the conventional finite-difference time-domain method.
1 December 2025 in Bulletin of Electrical Engineering and Informatics
The COVID-19 pandemic has highlighted the limitations of traditional healthcare, resulting in higher mortality rates among children, the elderly, and healthcare workers. This situation has created a pressing need for urgent medical care from healthcare professionals. This paper presents a secure cloud-based remote medical monitoring system that integrates the internet of things (RMMS-IoT) with advanced P-QRS-T electrocardiogram (ECG) detection algorithms to enable real-time, accurate vital sign analysis. The system combines microcontroller devices, wearable sensors, and medical-grade equipment, leveraging hypertext transfer protocol secure (HTTPS) and Blynk bridge cloud technologies to ensure data security and interoperability. The RMMS-IoT system demonstrated high accuracy in monitoring vital signs by comparing its results with data from actual measuring devices, showing errors in body temperature readings below 1% and heart rate (HR) measurements below 2.8%. The algorithm used to detect P-QRS-T features from the ECG exhibited robust performance in differentiating between normal and abnormal ECG patterns in patients, and it achieved an accuracy rate of 90% in ECG classification.
This paper presents a Ruthroff type spiral un-to-un transmission-line transformer (TLT) with impedance transformation ratio of 4:9. Our TLT is fabricated in Microstrip lines technology and covers a chip area of 1.02 mm × 1.12 mm. The simulated minimum insertion loss is 0.19 dB at 5.4 GHz, and the correspondent bandwidth of this TLT is 5.4 GHz (when the insertion loss exceeds 1 dB).
Nossa empresa trabalha com publicações de artigos acadêmicos em revistas científicas especializadas e indexadas. Assim como artigos científicos e anais de congressos, encontros ou simpósios acadêmicos, ou textos independentes, todos em forma de livros eletrônicos e impressos.Também fazemos seleções de artigos referências em algumas áreas para organização de livros temáticos. Ainda, nossa empresa trabalha com traduções científicas inglês-português e português-inglês, além de traduções juramentadas.
4 June 2025 in Engineering, Technology & Applied Science Research
Real-time systems need communication networks, as they often operate across multiple physical nodes. CAN-BUS is a common field bus used in these systems. Such systems require a time-based analysis to meet key deadlines and ensure system safety. This study designs and implements a distributed embedded motor control system using FreeRTOS over CAN-BUS for real-time operation. A prototype was built with low-cost components such as Arduino, L298N, and an MCP2515 module. A WCET analysis was performed on the system. The system has two CAN nodes connected to a PC via PCAN-USB for testing and analyzing using Busmaster software. The first CAN node controls the DC motor speed using a real-time PID controller, and the other manages the motor speed through CAN. The experimental results of the PID controller showed a low steady-state error of less than 0.3%. As the speed increases, there is less overshoot. The settling time ( ) is also short, proving the stability of the system. Πerformance was verified by comparing it with the signals from the Busmaster software. The WCET analysis used the Bound-T tool on the AVR2560 microprocessor (16 MHz without cache or pipeline). The calculated WCETs for three tasks were 1228.88 µs, 210.19 µs, and 2786.25 µs. This work verifies the schedulability of tasks for applications on a FreeRTOS real-time embedded platform. Bound-T is an open-source tool for WCET static analysis that has shown strong potential and can be used to perform precise and reliable temporal analyses.