The superconducting state properties of the CuBa2Ca3Cu4O10+δ (Cu-1234) system, with a transition temperature as high as 117.5 K, were investigated. The ac magnetic susceptibility measurements confirmed a very sharp transition to the superconducting state. The upper critical field, Hc2, as high as 91 T, and the irreversibility field, Hirr, as high as 21 T at 77 K, were determined using dc SQUID magnetization measurements. The intragrain critical current density, jc, estimated from a magnetic hysteresis loop, is as high as 5 × 109 A/m2 in a self-generated magnetic field at 77 K. However, the intergrain critical current density in the studied material is smaller by four orders of magnitude due to very weak intergrain connections.
Diluted magnetic semiconductors (DMSs) with tunable ferromagnetism are among the most promising materials for fabricating spintronic devices. Some DMS systems have sizeable magnetoresistances that can further extend their applications. Here, we report a new DMS Rb(Zn1−x−yLiyMnx)4As3 with a quasi-two-dimensional structure showing sizeable anisotropies in its ferromagnetism and transverse magnetoresistance (MR). With proper charge and spin doping, single crystals of the DMS display Curie temperatures up to 24 K. Analysis of the critical behavior via Arrott plots confirms the long-range ferromagnetic ordering in the Rb(Zn1−x−yLiyMnx)4As3 single crystals. We observed remarkable intrinsic MR effects in the single crystals (i.e., a positive MR of 85% at 0.4 T and a colossal negative MR of −93% at 7 T).
Recently, CuBa2Ca3Cu4O10+δ (Cu1234) has garnered significant interest owing to its distinctive triple-high superconducting properties (118K high Tc, combined with high Jc and high Hirr at liquid nitrogen temperature at ambient pressure) and potential for practical applications. The Cu1234 is initially synthesized at high pressures and is stable at a room temperature range but tends to decompose upon heating above 300 °C at ambient. In this study, we investigate the thermal stability of Cu1234 through annealing at various temperatures and oxygen pressures. It is found that Cu1234 starts to decompose at approximately 350 °C, 550 °C, and 600 °C when annealed at 1 bar, 100 bar, and 150 bar oxygen pressure, respectively. Prior to decomposition, however, the superconducting properties remain largely unchanged. The decrease in oxygen occupancy within the BaO layer of the BaCuO3−δ charge reservoir block is proposed to be the primary cause of the structural instability of Cu1234, while higher oxygen pressures retard oxygen loss from this block. Our result suggests that the decomposition temperature of Cu1234 will further increase with higher oxygen pressure, e.g., possibly to 800 °C at 260 bar if a linear extrapolation is adopted. This study offers important insights for fabricating Cu1234 tapes via the powder-in-tube method.