In physical-layer security schemes, radio frequency fingerprint (RFF) identification is vulnerable to the channel variations, and the identification of the long term evolution (LTE) mobile devices deserves further investigation. In this paper, we propose an RFF extraction method based on the LTE demodulation reference signal (DMRS) processing which can mitigate the channel impairments during the RFF extraction process. First, we analyze the impacts of RFF and the multipath channel on the DMRS in the LTE physical uplink shared channel and take the flexible time-frequency resource block allocations into account. Then, we propose an RFF extraction method based on the wavelet decomposition and reconstruction of the DMRS signals. It is found that the in-phase/quadrature (IQ) direct current offset and the frequency-dependent IQ imbalance mainly affect high-frequency components of the frequency domain DMRS signals, while the power amplifier memory nonlinearity and the channel effects mainly influence the low-frequency components. By removing the low-frequency components of the frequency domain DMRS signals, the proposed method is robust to the channel impairments. Finally, the simulation and experimental results show that our method can effectively reduce the channel impacts and retain the device RFF. The effectiveness of this method is verified via different classification tasks. The classification accuracy can reach 98.5% and 93.9% in the stationary and mobile scenarios, respectively. Meanwhile, by combining the training sets collected in the static and the moving scenarios together in the training process, the model can achieve better classification performance.
17 May 2023 in IEEE Transactions on Vehicular Technology
A frequency-domain cepstrum correlation and temporal transient filtered radio frequency fingerprints (RFF) blind extraction method is proposed for long term evolution uplink device authentication in this work. With the merits of the constant-modulus nature of the Zadoff-Chu (ZC) sequence and the cyclic prefix (CP) structure of the physical random access channel (PRACH) frame, the device RFF integrated in both the frequency-domain ZC sequence and the transient ramp-on/ramp-off sequences are extracted. For the frequency-domain RFF extraction, the cepstrum of the ZC sequence is calculated to enlarge the gap between the constant RFF and the random fading effects, and the correlation between two cepstrum fragments is then calculated to mitigate the random fading components. For the temporal RFF extraction, the ramp-on and ramp-off features induced by the device-specific power amplifier are extracted by exploiting the CP structure of the PRACH frame, where the CP part and the duplicate part are adaptively filtered and the final adapted weight of the least mean square filter is used as RFF. No prior PRACH parameter knowledge is required in RFF extraction and both the frequency-domain and the temporal RFF are combined as the input of the convolutional neural network to enhance the classification accuracy. With four-months sampling of PRACH signals emitted from universal software radio peripheral devices, the experimental results show that the authentication accuracy of the proposed combined RFF can reach as high as 99.9% in the line-of-sight (LOS) scenario and 99.6% in the non-LOS scenario.
27 December 2018 in IEEE Transactions on Communications
Unmanned aerial vehicles (UAV) can enhance wireless transmission security by improving the secrecy rate through relaying the legitimate transmission and injecting artificial noise to the eavesdroppers. However, due to the inherent mechanical energy consumption and the long-range signal propagation pathloss, the traditional cruising and hovering UAV relay modes are deficient in energy utilization and secrecy rate, respectively. Modeling of the secrecy energy efficiency with respect to UAV mode adaptation is limited in the literature and deserves further investigation. Therefore, in this paper, we propose a secrecy rate-energy efficient UAV relay mode adaptation scheme for secure wireless communications scenarios where the eavesdropping locations are known, i.e., the eavesdropper is a hijacked internal legitimate node. In this secure system, the UAV cooperatively assists the legitimate transmissions and injects artificial interference to the eavesdropper. We investigate optimum UAV placement and relay period planning for the hovering and the cruising relay modes, respectively. By modeling the UAV modes transfer and maximizing the secrecy energy efficiency, the optimum mode adaptation ratios are obtained under both the secrecy rate-prioritized and the energy-saving criteria. In addition, the proposed UAV relay mode adaptation mechanism is further studied for each UAV task division, to adapt to the dynamic channel variations and enhance the security. Our theoretical analysis shows that the mode adaptation ratio is determined by the secrecy rate-energy gain between the cruising and the hovering modes, and by the energy consumption threshold of the UAV relays. Our numerical results demonstrate that the proposed scheme achieves higher secrecy energy efficiency than the traditional schemes.
22 August 2022 in IEEE Transactions on Communications
The promising physical-layer authentication (PLA) scheme enjoys low computational complexity and provides a lightweight solution for the wireless transmission security problem. However, the ideal but impractical assumptions are made on the priori knowledge in the traditional PLA schemes, which fail because the priori knowledge can be interfered by the impersonation attacks. Hence, a blind PLA scheme featured by the composite radio sample characteristics, active monitoring slots, and blind hypotheses tests is proposed in this paper. In particular, the intrinsic location-specific channel response integrated with the transmitter-specific signal knowledge is sampled during the active monitoring slots and is used to conduct minimum error (ME) and Neyman-Pearson (NP) hypothesis tests. The authentication reliability is enhanced significantly by jointly using the ME and NP criteria. For both the stationary and the non-stationary signal cases, our theoretical analysis shows that the temporal channel variations, the spatial channel correlations and the spectral bandwidth contribute to improve the authentication reliability. Our simulation results not only demonstrate the effectiveness of the proposed PLA scheme, but also indicate the possible scenarios in which ME outperforms NP, and NP outperforms ME.
21 January 2019 in IEEE Transactions on Vehicular Technology
Full-duplex (FD) enabled cognitive radio (CR) is promising since it can largely improve the spectrum efficiency by simultaneously learning the radio environments and delivering data traffic. The performance gain of FD CR is achieved under the premise that the self-interference (SI) can be suppressed to be sufficiently small. However, to what extent should the SI be suppressed so that FD CR is more advantageous than halfduplex (HD) CR? In addition, is SI the only factor that should be considered in leveraging HD CR and FD CR? The answers to these questions are investigated in this work by studying degrees of freedom (DoF) for HD and FD CR. Theoretical analysis shows that not only SI but also the so-called timeantenna gain determines the DoF tradeoff between HD CR and FD CR. For all the CR schemes including interweave, underlay, overlay and hybrid, the SI thresholds and normalized timeantenna gain with which FD CR can outperform HD CR are theoretically derived. Moreover, the DoF upper-bound of HD CR is inversely proportional to the primary traffic intensity, the primary interference power and the radio environments learning time. Nevertheless, the DoF upper-bound of FD CR only relates to the primary interference power and the CR antenna number.