Rongrong Shang

Rongrong Shang

Auto-generated profile, based on publicly available information

Rongrong Shang


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 August 2025 in Materials
Verified
Journal Article
Open access
PDF file
YJYuan yuan Jin
Yuan yuan Jin
CXCheng Xie
Cheng Xie
KSKe Sun
Ke Sun
ZLZehuan Li
Zehuan Li
XWXin Wang
Xin Wang
Yunping LiYunping Li
Yunping Li
In this study, 10% nitric acid was employed to remove the aluminum coating on the cobalt-based superalloy K6509, with a focus on elucidating the corrosion mechanism and evaluating the effect of ultrasonic on the removal process. The results shows that ultrasonic treatment (40 kHz) significantly improves coating removal efficiency, increasing the maximum corrosion rate by 46.49% from 2.5413 × 10−7 g·s−1·mm−2 to 4.7488 × 10−7 g·s−1·mm−2 and reducing removal time from 10 min to 6 min. This enhancement is attributed to cavitation effect of ultrasonic bubbles and the shockwave-accelerated ion diffusion, which together facilitate more efficient coating degradation and results in a smoother surface. In terms of corrosion behavior, the difference in phase composition between the outer layer and the interdiffusion zone (IDZ) plays a decisive role. The outer layer is primarily composed of β-(Co,Ni)Al phase, which is thermodynamically less stable in acidic environments and thus readily dissolves in 10% HNO3. In contrast, the IDZ mainly consists of Cr23C6, which exhibit high chemical stability and a strong tendency to passivate. These characteristics render the IDZ highly resistant to nitric acid attack, thereby forming a protective barrier that limits acid penetration and helps maintain the integrity of the substrate.

30 November 2023 in Materials
Verified
Journal Article
Open access
PDF file
RSRongrong Shang
Rongrong Shang
BYBiaobiao Yang
Biaobiao Yang
Yunping LiYunping Li
Yunping Li
Co-based alloys are promising alternatives to replace the currently used tool steels in aluminum die-casting molds for producing sophisticated products. Although the reaction is significantly less severe compared to that of tool steels, bare Co-29Cr-6Mo (CCM) alloy is still gradually corroded under molten Al, leading to the local failure of the alloy due to the formation of intermetallic compounds between the matrix and molten Al. This study indicated that prior oxidation treatment at 750 °C on CCM alloy is beneficial in enhancing the corrosion resistance of the alloy to molten Al. The is more pronounced in the alloy after a longer oxidation treatment. However, after oxidation for longer than 24 h, the protectiveness of the film cannot be enhanced anymore. In addition, even after the full failure of the oxide film, the thickness loss rate of a sample with prior oxidation treatment is much lower than that of a bare sample. This can be attributed to the fact that network-aligned oxide particles of the cone structure boundary inhibit both the outwards movements of alloying elements and the dissolution of the intermetallic layer.

2 March 2026 in Materials
Verified
Journal Article
Open access
PDF file
XDXiaoxuan Dong
Xiaoxuan Dong
YLYidi Li
Yidi Li
RSRongrong Shang
Rongrong Shang
MCMengxia Chen
Mengxia Chen
LLLu Liu
Lu Liu
Yunping LiYunping Li
Yunping Li
In this study, Inconel 600 alloy with reductions of 20%, 50%, and 80% was obtained through cold rolling, and the effects of plastic deformation on its mechanical properties and corrosion behavior in a hydrofluoric acid (HF) solution were systematically investigated. The results show that cold rolling induces pronounced work hardening, with both hardness and strength increasing continuously with increasing reduction, while the ductility decreases accordingly. The alloy with 80% reduction exhibits the highest strength, with an ultimate tensile strength of 1270 MPa and a yield strength of 1210 MPa. In contrast, the macroscopic corrosion resistance of the alloy in HF solution remains essentially unchanged with increasing deformation, although a slight intensification of pitting corrosion is observed. The combined effects of deformation-induced pitting and passivation enhancement resulted in retention of corrosion resistance. These findings demonstrate that appropriate control of cold rolling enables effective mechanical strengthening of Inconel 600 without significantly sacrificing its corrosion performance in aggressive fluorine containing environments.

21 September 2026 in Corrosion Science
Verified
Journal Article
Closed access
RSRongrong Shang
Rongrong Shang
JTJianwei Teng
Jianwei Teng
YLYidi Li
Yidi Li
YWYu Wang
Yu Wang
YZYaxi Zhou
Yaxi Zhou
Yunping LiYunping Li
Yunping Li