The use of plastic film in agriculture has the serious drawback of producing vast quantities of waste. In this work, films were prepared from natural fibers and biodegradable polymers as potential substitutes for the conventional non-biodegradable plastic film used as mulching material in agricultural production. The physical properties (e.g., mechanical properties, heat preservation, water permeability, and photopermeability) and degradation characteristics (evaluated by micro-organic culture testing and soil burial testing) of the films were studied in both laboratory and field tests. The experimental results indicated that these fiber/polymer films exhibited favorable physical properties that were sufficient for use in mulching film applications. Moreover, the degradation degree of the three tested films decreased in the following order: fiber/starch (ST) film > fiber/poly(vinyl alcohol) (PVA) film > fiber/polyacrylate (PA) film. The fiber/starch and fiber/PVA films were made from completely biodegradable materials and demonstrated the potential to substitute non-biodegradable films.

Background: Ionic liquids (ILs) are considered as green solvents, and widely applied for the extraction of various compounds. Methods: The present research focuses on the extraction of flavonoids from Apocynum venetum L. leaves by ultrasound-assisted extraction (UAE). Several major influencing factors were optimized. Then, an aqueous biphasic system (ABS) was applied for further isolation of flavonoids. Results: The flavonoids were mainly distributed in the top phase, while impurities were extracted to the bottom phase. The parameters influencing the extraction, namely type and concentration of salt, temperature, and pH, were studied in detail. Under optimized conditions (72.43% IL extract, 28.57% (NH₄)₂SO₄, 25 °C temperature, pH 4.5), the preconcentration factor and extraction efficiency were found to be 3.78% and 93.35%, respectively. Conclusions: This simple and efficient methodology is expected to see great use in the extraction and isolation of pharmaceutically active components from medicinal plant resources.

In this work, a two-step extraction methodology of ionic liquid-based ultrasonic-assisted extraction (IL-UAE) and ionic liquid-based aqueous two-phase system (IL-ATPS) was developed for the extraction and purification of secoisolariciresinol diglucoside (SDG) from flaxseed. In the IL-UAE step, several kinds of ILs were investigated as the extractants, to identify the IL that affords the optimum extraction yield. The extraction conditions such as IL concentration, ultrasonic irradiation time, and liquid–solid ratio were optimized using response surface methodology (RSM). In the IL-ATPS step, ATPS formed by adding kosmotropic salts to the IL extract was used for further separation and purification of SDG. The most influential parameters (type and concentration of salt, temperature, and pH) were investigated to obtain the optimum extraction efficiency. The maximum extraction efficiency was 93.35% under the optimal conditions of 45.86% (w/w) IL and 8.27% (w/w) Na₂SO₄ at 22 °C and pH 11.0. Thus, the combination of IL-UAE and IL-ATPS makes up a simple and effective methodology for the extraction and purification of SDG. This process is also expected to be highly useful for the extraction and purification of bioactive compounds from other important medicinal plants.

Adsorptive atmospheric water harvesting systems (AWHs) represent an innovative approach to collecting freshwater resources from the atmosphere, with a hygroscopic agent at their core. This method has garnered significant attention due to its broad applicability, strong recycling capacity, and sustainability. It is being positioned as a key technology to address global freshwater scarcity. The core agent’s hygroscopic properties play a crucial role in determining the performance of the AWHs. This article provides a comprehensive review of the latest advancements in hygroscopic agents, including their adsorption mechanisms and classifications. This study of hygroscopic agents analyzes the performance and characteristics of relevant porous material composite polymer composites and plant composites. It also evaluates the design and preparation of these materials. Aiming at the problems of low moisture adsorption and desorption difficulty of the hygroscopic agent, the factors affecting the water vapor adsorption performance and the method of enhancing the hygroscopic performance of the material are summarized and put forward. For the effect of hygroscopic agents on the volume of water catchment devices, the difference in density before and after hygroscopicity is proposed as part of the evaluation criteria. Moisture absorption per unit volume is added as a performance evaluation criterion to assess the effect of hygroscopic agents on the volume of water collection equipment. The article identifies areas that require further research and development for moisture absorbers, exploring their potential applications in other fields and anticipating the future development direction and opportunities of moisture-absorbing materials. The goal is to promote the early realization of adsorptive atmospheric water harvesting technology for large-scale industrial applications.

In response to the challenge of resource recycling, this review investigates the removal of phytotoxicity from agricultural waste for its application as a growing media component. Agricultural waste typically exhibits high phytotoxicity due to the presence of substances such as phenols, organic acids, ammonia, nitrogen, and heavy metals. These substances hinder seed germination and plant growth, posing a significant barrier to the use of agricultural waste as a growing media component. Thus, it is imperative to mitigate or eliminate phytotoxicity before effectively utilizing agricultural waste. This review rigorously analyzes an extensive array of recent studies, scrutinizing diverse technologies for the mitigation of phytotoxicity in agricultural wastes. The methods investigated include the four most common methods—composting, heat treatment, washing, and aging, and a recently introduced method, ammonium incubation. Each method was assessed considering its underlying principles, effects in application, and respective advantages and disadvantages. This review suggests that successful phytotoxicity mitigation in agricultural waste hinges on reducing the content or activity of phytotoxic substances. Moreover, this study emphasizes that future phytotoxicity mitigation efforts should aim for economic efficiency while maximizing the preservation of the original material volume and weight. This study offers insightful guidance for technical professionals aiming to mitigate the phytotoxicity of agricultural waste, thereby fostering sustainable agricultural practices.

Ficus pumila L. has been used as a functional plant for a long time in East Asia, especially its fruits, as a dietary component in Japan and parts of China. A series of bioactive compounds, including phenolic acids, flavonoids, terpenoids, alcohols, and steroids, have been extracted from the stems, leaves, flowers, and fruits of Ficus pumila L. Accumulated studies have demonstrated that Ficus pumila L. has multiple therapeutic activities, including antioxidant, anti-inflammatory, antibacterial, antitumor, hypoglycemic, and cardiovascular protective effects. Moreover, Ficus pumila L. has extensive applications, such as in the food industry and ecological city construction. Herein, we summarize the latest knowledge about the bioactive compounds and therapeutic activities of Ficus pumila L., and its applications in the food industry and ecological city construction are also discussed. We hope that this comprehensive review can attract more attention to Ficus pumila L. and be helpful for its further applications.