Metallic corrosion can be delayed using corrosion inhibitors. However, several industrial corrosion inhibitors are toxic and harmful to the environment and to the human health. In this context, in the last decades, research has been developed to investigate the performance of low toxicity corrosion inhibitors as green inhibitors obtained from vegetables, which are environmentally acceptable. The present work studied the corrosion inhibition efficiency of peel garlic extract (Allium sativum. L.) for possible replacement of benzotriazole (BTAH) on the corrosion inhibition of ASTM 1020 carbon steel (CS-1020) in 0.5 mol. L−1 hydrochloric acid media. Weight loss measurements, anodic and cathodic potentiodynamic curves and electrochemical impedance (EIS) experiments were carried out. The Fourier transformed infrared spectroscopy (FTIR) was carried out to evaluate the chemical compounds. The morphological characterization was obtained to observe the inhibitor effect in the corrosion products on substrate surface. The results showed that the addition of both inhibitors effectively hinder the corrosion process and indicated their adsorption on the electrode surface. The inhibiting efficiency of the peel garlic extract was only slightly inferior to BTAH showing that the former inhibitor can be an environmentally friendly option to toxic inhibitors. The FTIR analysis showed the presence of chemical compounds which presents antioxidant properties.
In this work, the wettability of the galvannealed surface pretreated with the hybrid silane APTES/GPTMS film was measured by sessile drop method. The coatings were applied on the substrate from dip-coating method and dried in an oven. The study followed an experimental factorial design, 3³, with contact angle as response. The corrosion resistance was evaluated by electrochemical techniques and the surface morphology was characterized by scanning electron microscopy. The wettability results showed the best condition for galvannealed steel pretreated with the hybrid silane film for 2:1 APTES:GPTMS ratio, 2% silane concentration and 150 min of hydrolysis time, because the result may be related to a higher rate of hydrolysis of the silanes that is influenced by both the functional group present and by the type and number of hydrolyzed groups, resulting consequently in a higher availability of silanol groups in solution, promoting a greater crosslinking of the film on the metallic substrate.
A qualidade da água para consumo está diretamente associada com a saúde do ser humano, sendo ela o elemento mais importante do corpo, pois todas as reações químicas internas dependem dela. Há várias doenças que são transmitidas pela água em função da presença de microrganismos patogênicos e de fatores físico-químicos da água com deficiência de tratamento. As comunidades rurais são negligenciadas pelas autoridades públicas, e não resta opção, senão a busca por soluções alternativas de captação e abastecimento de água para subsistência. Nesse contexto, a Vila Maria Jape – que, através de um represamento a céu aberto, utiliza água superficial como alternativa – sofre com a influência da lixiviação do solo pela chuva sem qualquer tratamento. A caracterização da água destinada ao consumo humano é de fundamental importância e de relevância social, uma vez que a água tem a capacidade de transmitir rapidamente enfermidades para um grande número de pessoas. As análises físico-químicas e microbiológicas de amostras coletadas nos períodos seco e chuvoso indicaram que a água apresenta microrganismos e substâncias que podem ser prejudiciais à saúde humana. Há uma necessidade de intervenção técnica e social nessa comunidade, no sentido de promover o tratamento da água nos aspectos físicos, químicos e microbiológicos. Conclui-se que o desenvolvimento de uma educação sanitária e o tratamento da água já comprometida são ações necessárias para reduzir os riscos de doenças de veiculação hídrica nas comunidades não atendidas por água tratada e abastecimento público.
1 November 2020 in Construction and Building Materials