An all-optical temporal differentiator with a record operation bandwidth of ~25 THz (~200 nm, at least one order of magnitude larger than any previously reported temporal differentiation technology) is experimentally demonstrated based on a simple and compact all-fiber wavelength-selective directional coupler. The fabricated directional coupler can be used to process optical signals with time features as short as a few tens of femtosecond. A Gaussian-like optical pulse with a time-width of 250-fs is experimentally differentiated with a processing error of 2.1%. As an application example, a chirp-free flat-top pulse with a time-width of 540-fs is also successfully generated.
A novel differential mode delay (DMD) measurement technique for a multimode optical fiber based on optical frequency domain reflectometry (OFDR) has been proposed. We have obtained a high-resolution DMD value of 0.054 ps/m for a commercial multimode optical fiber with length of 50 m by using a modified OFDR in a Mach-Zehnder interferometer structure with a tunable external cavity laser and a Mach-Zehnder interferometer instead of Michelson interferometer. We have also compared the OFDR measurement results with those obtained using a traditional time-domain measurement method. DMD resolution with our proposed OFDR technique is more than an order of magnitude better than a result obtainable with a conventional time-domain method.
Wavelength-selective directional couplers with dissimilar waveguides are designed for ultrafast optical differentiation within the femtosecond regime (corresponding to processing bandwidths > 10 THz). The theoretically proposed coupler-based differentiators can be produced by wavelength matching of the propagation constants of two different waveguides in the coupler at the center wavelength. A single directional coupler can be designed to achieve either a 2nd-order differentiator or a 1st-order differentiator by properly fixing the product of coupling coefficient and coupling length of the coupler. We evaluated the differentiation errors (~2%) and energetic efficiency (~11% for 1st order differentiation) of the designed optical differentiators through numerical simulations. The proposed design has a strong potential to provide a feasible solution as an integrated differentiation unit device for ultrafast optical signal processing circuits.
A highly sensitive temperature sensor was made by use of a side-hole glass fiber filled with indium metal, and its optical properties were investigated. The temperature sensitivity of the fiber-optic temperature sensor was . The temperature sensitivity was also examined in sensors made by different lengths of the side-hole fiber and the indium-filled fiber region. The temperature sensitivity could be varied in the range of to by changing the relative length between the side-hole fiber and the indium-filled fiber region.
An evaporation rate measurement method based on multiple reflection interference using a simple fiber optic configuration is proposed in this study. The evaporation rate is a major factor in preventing accidents and is used in various industrial, chemical, biotechnological, and biological fields. The evaporation rate sensor measures the interference signal during evaporation of a liquid. The main frequency of an interferogram is linearly proportional to the evaporation rate and can be obtained by applying a fast Fourier transform to the interferogram. In our study, the time-averaged evaporation rates of deionized (DI) water and ethanol were tested. Ethanol evaporated at a rate approximately a factor 4 faster than that of DI water. In addition, a Hilbert transform was used to retrieve the phase information of the interferogram over time. Our proposed method is a powerful tool for monitoring the evaporation dynamics of a liquid in time. The sensor requires a tiny amount of liquid as a test sample to determine the rate of evaporation and offers high reliability and reproducibility at low cost.
A novel distributed ultraviolet (UV) light sensor, based on a functional polymer coated optical fiber is proposed. Azobenzene polymer was prepared by mixing an azobenzene compound and UV curing agent and applied as coating on a distributed strain sensor probe as optical fiber, using a UV curing process. This coating was reversibly stretched by UV light and in the coated region it induced tensile strains by UV light along the fiber. This strain, measured by a distributed fiber optic sensor (DFOS) interrogator, was up to 124.5 με under a UV power of 10 mW/cm2. Using this method, distributed UV monitoring can be realized in conventional strain/temperature DFOS interrogators.